Discover XQ-Power Servos in Our eBay Store!
Shop NowSearch Matches (5,627)
Performance
Physical
Drivetrain
Control & Signal
Electrical & Environment
Connectivity
Origin
Preferences are saved automatically.
| Make | Model | Category | Torque | Speed | Stall Current |
Weight | Dimensions (L×W×H) |
Diameter | Size Class |
Case Material |
Motor Type |
Motor Drive |
Gear Material |
Gear Spline/ Teeth |
Rotation | Modulation | Direction | Op. Range |
Mech. Limit |
Pulse Cycle |
Pulse Width |
Neutral Pos. |
Dead Band |
Refresh Rate |
Angle Sensor |
Control System |
Programmable | Op. Voltage |
Power Source |
Regulator Type |
Temperature | Water Rating |
Certification | Connector | Wire Length |
Country of Origin |
Shaft Power |
Shape | Shaft Size |
Resolution | Gear Ratio |
Baud Rate |
Output Power |
Radial Load |
MCU | Operating Modes |
Running Current |
Rotation Mode |
Idle Current |
Backlash | Signal Voltage |
Compare | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| We may earn a commission from your purchase. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Dymond | D360 | Hobby |
6.0V 40.0 oz-in2.88 kg-cm0.3 N-m 4.8V 39.0 oz-in2.81 kg-cm0.3 N-m |
6.0V 0.10 s/60°600.0 deg/s100.0 RPM 4.8V 0.10 s/60°600.0 deg/s100.0 RPM |
(add) | 0.53 oz15.0 g | 0.90×0.47×1.34 in 22.8×11.8×34.0 mm | — | Mini | (add) | (add) | (add) | Metal | (add) | Single Bearing | Digital | (add) | 360° | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 0.72–0.74 W | — | (add) | — | — | — | — | — | — | — | (add) | Continuous | (add) | — | — | ||
| Dymond | D4.4 Sky Arrow | Hobby | 4.8V 11.2 oz-in0.81 kg-cm0.1 N-m | 4.8V 0.12 s/60°500.0 deg/s83.3 RPM | (add) | 0.15 oz4.3 g | 0.79×0.33×0.95 in 20.0×8.3×24.0 mm | — | Micro | (add) | (add) | (add) | Plastic | 25 | Bushing | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.17 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Dymond | D4000 | Hobby | 4.8V 45.3 oz-in3.26 kg-cm0.3 N-m | 4.8V 0.27 s/60°224.7 deg/s37.5 RPM | (add) | 1.76 oz50.0 g | 1.61×0.79×1.40 in 40.8×20.1×35.5 mm | — | Standard | (add) | (add) | (add) | Plastic | 25 | Single Bearing | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.31 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Dymond | D4500 * | Hobby | 4.8V 77.0 oz-in5.54 kg-cm0.5 N-m | 4.8V 0.13 s/60°461.5 deg/s76.9 RPM | (add) | 1.45 oz41.0 g | 1.58×0.79×1.52 in 40.0×20.0×38.5 mm | — | Standard | (add) | (add) | (add) | Plastic | (add) | Single Bearing | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 1.10 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Dymond | D47 * | Hobby | 4.8V 20.0 oz-in1.44 kg-cm0.1 N-m | 4.8V 0.14 s/60°428.6 deg/s71.4 RPM | (add) | 0.17 oz4.7 g | 0.67×0.32×0.87 in 17.0×8.0×22.0 mm | — | Micro | Plastic | Brushed | (add) | Nylon | 25 | Bushing | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Potentiometer | PWM | (add) | 3.7–7.4 V | Direct | Direct | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.26 W | — | (add) | — | — | — | — | — | — | — | 0.080 A @ 4.8V80 mA @ 4.8V | Positional | (add) | — | — | ||
| Dymond | D47S * | Hobby | 4.8V 16.0 oz-in1.15 kg-cm0.1 N-m | 4.8V 0.08 s/60°750.0 deg/s125.0 RPM | (add) | 0.17 oz4.7 g | 0.87×0.32×0.67 in 22.0×8.0×17.0 mm | — | Micro | (add) | Brushed | (add) | Plastic | 25 | Bushing | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 8.4 V | LiFe | Direct | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.37 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Dymond | D5000 | Hobby | 4.8V 125.0 oz-in9.00 kg-cm0.9 N-m | 4.8V 0.30 s/60°200.0 deg/s33.3 RPM | (add) | 1.94 oz55.0 g | 1.61×0.79×1.40 in 40.8×20.1×35.5 mm | — | Standard | (add) | (add) | (add) | Metal | 25 | Single Bearing | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 4.8–4.8 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.77 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Dymond | D55 | Hobby | 4.8V 12.0 oz-in0.86 kg-cm0.1 N-m | 4.8V 0.14 s/60°428.6 deg/s71.4 RPM | (add) | 0.21 oz6.0 g | 0.82×0.45×0.87 in 20.9×11.4×22.0 mm | — | Micro | (add) | (add) | (add) | Plastic | 25 | Bushing | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.16 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Dymond | D60 | Hobby | 4.8V 24.0 oz-in1.73 kg-cm0.2 N-m | 4.8V 0.14 s/60°428.6 deg/s71.4 RPM | (add) | 0.35 oz10.0 g | 0.95×0.35×1.06 in 24.0×9.0×27.0 mm | — | Slim | (add) | (add) | (add) | Plastic | 25 | Bushing | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | (add) | 3.6–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 125 mm4.92 in | (add) | 0.32 W | — | (add) | — | — | — | — | — | — | Position | (add) | Positional | (add) | — | — | ||
| Dymond | D6000 | Hobby | 4.8V 185.0 oz-in13.32 kg-cm1.3 N-m | 4.8V 0.18 s/60°333.3 deg/s55.6 RPM | (add) | 1.94 oz55.0 g | 1.61×0.79×1.50 in 40.8×20.1×38.0 mm | — | Standard | (add) | (add) | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 1.90 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Dymond | D6500 | Hobby | 4.8V 140.0 oz-in10.08 kg-cm1.0 N-m | 4.8V 0.20 s/60°300.0 deg/s50.0 RPM | (add) | 2.05 oz58.0 g | 1.58×0.79×1.52 in 40.0×20.0×38.5 mm | — | Standard | (add) | (add) | (add) | Metal | (add) | Single Bearing | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 1.29 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Dymond | D7000 | Hobby | 4.8V 150.0 oz-in10.80 kg-cm1.1 N-m | 4.8V 0.18 s/60°333.3 deg/s55.6 RPM | (add) | 1.94 oz55.0 g | 1.61×0.79×1.50 in 40.8×20.1×38.0 mm | — | Standard | (add) | (add) | (add) | Metal | 25 | Dual Bearings | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 1.54 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Dymond | D7500 * | Hobby | 4.8V 107.6 oz-in7.75 kg-cm0.8 N-m | 4.8V 0.27 s/60°224.7 deg/s37.5 RPM | (add) | 2.22 oz63.0 g | 1.59×0.79×1.59 in 40.5×20.0×40.5 mm | — | Standard | (add) | (add) | (add) | Metal | 25 | Single Bearing | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 4.8–4.8 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.75 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Dymond | D80 * | Hobby | 4.8V 12.0 oz-in0.86 kg-cm0.1 N-m | 4.8V 0.14 s/60°428.6 deg/s71.4 RPM | (add) | 0.30 oz8.5 g | (add) | — | Unknown | (add) | (add) | (add) | Plastic | 25 | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.16 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Dymond | D8000 | Hobby | 4.8V 190.0 oz-in13.68 kg-cm1.3 N-m | 4.8V 0.18 s/60°333.3 deg/s55.6 RPM | (add) | 1.94 oz55.0 g | 1.61×0.79×1.50 in 41.0×20.0×38.0 mm | — | Standard | (add) | (add) | (add) | Metal | (add) | Dual Bearings | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 1.95 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Dymond | D90 | Hobby | 4.8V 21.2 oz-in1.53 kg-cm0.1 N-m | 4.8V 0.12 s/60°500.0 deg/s83.3 RPM | (add) | 0.32 oz9.0 g | 0.81×0.47×0.90 in 20.6×12.0×22.8 mm | — | Micro | (add) | (add) | (add) | Plastic | 25 | Bushing | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 4.8–4.8 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.33 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Dymond | D90 Digital | Hobby | 4.8V 21.0 oz-in1.51 kg-cm0.1 N-m | 4.8V 0.12 s/60°500.0 deg/s83.3 RPM | (add) | 0.32 oz9.0 g | 0.91×0.47×0.85 in 23.0×12.0×21.5 mm | — | Micro | (add) | (add) | (add) | Plastic | 25 | Bushing | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.32 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Dymond | D9000 | Hobby |
7.4V 403.0 oz-in29.02 kg-cm2.8 N-m 6.0V 361.0 oz-in25.99 kg-cm2.5 N-m |
7.4V 0.14 s/60°428.6 deg/s71.4 RPM 6.0V 0.16 s/60°375.0 deg/s62.5 RPM |
(add) | (add) | 1.58×0.79×1.47 in 40.0×20.0×37.2 mm | — | Standard | (add) | (add) | (add) | (add) | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 4.17–5.32 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Dymond | DXP | Hobby | 6.0V 150.0 oz-in10.80 kg-cm1.1 N-m | 6.0V 0.20 s/60°300.0 deg/s50.0 RPM | (add) | 2.12 oz60.0 g | 1.61×0.87×1.26 in 41.0×22.0×32.0 mm | — | Standard | (add) | (add) | (add) | Metal | (add) | Dual Bearings | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 1.39 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Dymond | GWSMini | Hobby |
6.0V 58.0 oz-in4.18 kg-cm0.4 N-m 4.8V 47.0 oz-in3.38 kg-cm0.3 N-m |
(add) | (add) | 0.94 oz26.6 g | 1.38×0.67×1.26 in 35.0×16.9×32.0 mm | — | Standard | (add) | (add) | (add) | Plastic | (add) | Bushing | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | — | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Dymond | HDS-377 * | Hobby | (add) | (add) | (add) | 1.34 oz38.0 g | 1.46×0.71×1.18 in 37.0×18.0×30.0 mm | — | Standard | (add) | Brushed | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | 1500 µs | 1 µs | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | — | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Dymond | HDS-477 * | Hobby | 4.8V 41.7 oz-in3.00 kg-cm0.3 N-m | 4.8V 0.12 s/60°500.0 deg/s83.3 RPM | (add) | 1.02 oz29.0 g | 1.22×0.63×1.20 in 31.0×16.0×30.5 mm | — | Unknown | (add) | Brushed | (add) | Plastic | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | 1500 µs | 1 µs | (add) | (add) | (add) | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 0.64 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Dymond | HDS-577 * | Hobby |
6.0V 62.5 oz-in4.50 kg-cm0.4 N-m 4.8V 55.6 oz-in4.00 kg-cm0.4 N-m |
6.0V 0.10 s/60°600.0 deg/s100.0 RPM 4.8V 0.12 s/60°500.0 deg/s83.3 RPM |
(add) | 0.69 oz19.5 g | 1.10×0.53×1.10 in 28.0×13.5×28.0 mm | — | Mini | (add) | Brushed | (add) | Metal | (add) | (add) | Digital | (add) | (add) | (add) | (add) | (add) | 1500 µs | 1 µs | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.86–1.16 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | — | ||
| Dymond | HDS-877 * | Hobby |
6.0V 34.7 oz-in2.50 kg-cm0.2 N-m 4.8V 30.6 oz-in2.20 kg-cm0.2 N-m |
6.0V 0.09 s/60°666.7 deg/s111.1 RPM 4.8V 0.11 s/60°545.5 deg/s90.9 RPM |
(add) | 0.39 oz11.0 g | 0.86×0.43×0.78 in 21.8×11.0×19.8 mm | — | Micro | (add) | Brushed | (add) | Metal | (add) | (add) | Digital | (add) | (add) | (add) | (add) | 1100–1900 µs | 1500 µs | 1 µs | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.51–0.71 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | — | ||
| Dynam | B2232 * | Hobby |
6.0V 56.9 oz-in4.10 kg-cm0.4 N-m 4.8V 44.4 oz-in3.20 kg-cm0.3 N-m |
6.0V 0.16 s/60°375.0 deg/s62.5 RPM 4.8V 0.29 s/60°206.9 deg/s34.5 RPM |
(add) | 1.20 oz34.0 g | 2.17×0.79×1.77 in 55.0×20.0×45.0 mm | — | Standard | (add) | (add) | (add) | Plastic | (add) | Single Bearing | Analog | (add) | 180° | (add) | 20 ms | 500–2500 µs | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.28–0.66 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
Make: Dymond
Stall Current: (add)
Shaft Power: 0.72–0.74 W
Weight: 0.53 oz15.0 g
Size Class: Mini
Diameter: —
Dimensions: 0.90×0.47×1.34 in 22.8×11.8×34.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: 360°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Dymond
Stall Current: (add)
Shaft Power: 0.17 W
Weight: 0.15 oz4.3 g
Size Class: Micro
Diameter: —
Dimensions: 0.79×0.33×0.95 in 20.0×8.3×24.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 25
Rotation: Bushing
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Dymond
Stall Current: (add)
Shaft Power: 0.31 W
Weight: 1.76 oz50.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.61×0.79×1.40 in 40.8×20.1×35.5 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 25
Rotation: Single Bearing
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Dymond
Stall Current: (add)
Shaft Power: 1.10 W
Weight: 1.45 oz41.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.79×1.52 in 40.0×20.0×38.5 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: (add)
Rotation: Single Bearing
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Dymond
Stall Current: (add)
Shaft Power: 0.26 W
Weight: 0.17 oz4.7 g
Size Class: Micro
Diameter: —
Dimensions: 0.67×0.32×0.87 in 17.0×8.0×22.0 mm
Case Material: Plastic
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Nylon
Gear Spline/Teeth: 25
Rotation: Bushing
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Potentiometer
Control System: PWM
Programmable: (add)
Op. Voltage: 3.7–7.4 V
Power Source: Direct
Regulator Type: Direct
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Dymond
Stall Current: (add)
Shaft Power: 0.37 W
Weight: 0.17 oz4.7 g
Size Class: Micro
Diameter: —
Dimensions: 0.87×0.32×0.67 in 22.0×8.0×17.0 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 25
Rotation: Bushing
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 8.4 V
Power Source: LiFe
Regulator Type: Direct
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Dymond
Stall Current: (add)
Shaft Power: 0.77 W
Weight: 1.94 oz55.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.61×0.79×1.40 in 40.8×20.1×35.5 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Single Bearing
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–4.8 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Dymond
Stall Current: (add)
Shaft Power: 0.16 W
Weight: 0.21 oz6.0 g
Size Class: Micro
Diameter: —
Dimensions: 0.82×0.45×0.87 in 20.9×11.4×22.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 25
Rotation: Bushing
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Dymond
Stall Current: (add)
Shaft Power: 0.32 W
Weight: 0.35 oz10.0 g
Size Class: Slim
Diameter: —
Dimensions: 0.95×0.35×1.06 in 24.0×9.0×27.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 25
Rotation: Bushing
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 3.6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 125 mm4.92 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: Position
Make: Dymond
Stall Current: (add)
Shaft Power: 1.90 W
Weight: 1.94 oz55.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.61×0.79×1.50 in 40.8×20.1×38.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Dymond
Stall Current: (add)
Shaft Power: 1.29 W
Weight: 2.05 oz58.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.79×1.52 in 40.0×20.0×38.5 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Dymond
Stall Current: (add)
Shaft Power: 1.54 W
Weight: 1.94 oz55.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.61×0.79×1.50 in 40.8×20.1×38.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Dymond
Stall Current: (add)
Shaft Power: 0.75 W
Weight: 2.22 oz63.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.79×1.59 in 40.5×20.0×40.5 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Single Bearing
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–4.8 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Dymond
Stall Current: (add)
Shaft Power: 0.16 W
Weight: 0.30 oz8.5 g
Size Class: Unknown
Diameter: —
Dimensions: (add)
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 25
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Dymond
Stall Current: (add)
Shaft Power: 1.95 W
Weight: 1.94 oz55.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.61×0.79×1.50 in 41.0×20.0×38.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Dymond
Stall Current: (add)
Shaft Power: 0.33 W
Weight: 0.32 oz9.0 g
Size Class: Micro
Diameter: —
Dimensions: 0.81×0.47×0.90 in 20.6×12.0×22.8 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 25
Rotation: Bushing
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–4.8 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Dymond
Stall Current: (add)
Shaft Power: 0.32 W
Weight: 0.32 oz9.0 g
Size Class: Micro
Diameter: —
Dimensions: 0.91×0.47×0.85 in 23.0×12.0×21.5 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 25
Rotation: Bushing
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Dymond
Stall Current: (add)
Shaft Power: 4.17–5.32 W
Weight: (add)
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.79×1.47 in 40.0×20.0×37.2 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: (add)
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Dymond
Stall Current: (add)
Shaft Power: 1.39 W
Weight: 2.12 oz60.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.61×0.87×1.26 in 41.0×22.0×32.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Dymond
Stall Current: (add)
Shaft Power: —
Weight: 0.94 oz26.6 g
Size Class: Standard
Diameter: —
Dimensions: 1.38×0.67×1.26 in 35.0×16.9×32.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: (add)
Rotation: Bushing
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Dymond
Stall Current: (add)
Shaft Power: —
Weight: 1.34 oz38.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.46×0.71×1.18 in 37.0×18.0×30.0 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: 1 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Dymond
Stall Current: (add)
Shaft Power: 0.64 W
Weight: 1.02 oz29.0 g
Size Class: Unknown
Diameter: —
Dimensions: 1.22×0.63×1.20 in 31.0×16.0×30.5 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: 1 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Dymond
Stall Current: (add)
Shaft Power: 0.86–1.16 W
Weight: 0.69 oz19.5 g
Size Class: Mini
Diameter: —
Dimensions: 1.10×0.53×1.10 in 28.0×13.5×28.0 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: 1 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Dymond
Stall Current: (add)
Shaft Power: 0.51–0.71 W
Weight: 0.39 oz11.0 g
Size Class: Micro
Diameter: —
Dimensions: 0.86×0.43×0.78 in 21.8×11.0×19.8 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 1100–1900 µs
Neutral Pos.: 1500 µs
Dead Band: 1 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Dynam
Stall Current: (add)
Shaft Power: 0.28–0.66 W
Weight: 1.20 oz34.0 g
Size Class: Standard
Diameter: —
Dimensions: 2.17×0.79×1.77 in 55.0×20.0×45.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: (add)
Rotation: Single Bearing
Modulation: Analog
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: 20 ms
Pulse Width: 500–2500 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Quick Tips
- Models with an asterisk (*) have been discontinued.
- Click on any servo model name to see more details about that product.
- Click on any brand name to filter all servos for that brand.
- In the desktop view, click on any column header to sort the table by that attribute. Click again to reverse the order.
Compare Prices for
Unable to load results. Please try again.