Discover XQ-Power Servos in Our eBay Store!
Shop Now
Technical Specifications
Last Updated: 2026-07-10
|
Identity
Performance
Physical
Drivetrain
Control & Signal
Electrical & Environment
Connectivity
Origin
Preferences are saved automatically.
Weight
Dimensions
Torque
Speed
Current
Temp
Wire
| Identity | |
| Brand |  |
| Product Number | DY-1003 |
| Category | Hobby |
| Discontinued | Yes |
| Performance | |
| Torque |
6.0V
56.90 oz-in
4.10 kg-cm
0.4 N-m
4.8V
44.40 oz-in
3.20 kg-cm
0.3 N-m
|
| Speed |
6.0V
0.16 sec/60°
375.0 deg/s
62.5 RPM
4.8V
0.29 sec/60°
206.9 deg/s
34.5 RPM
|
| Running Current | (add) |
| Stall Current | (add) |
| Shaft Power | 0.28–0.66 W |
| Physical | |
| Weight | 1.20 oz34.0 g |
| Dimensions |
L 2.17 in W 0.79 in H 1.77 in L 55.0 mm W 20.0 mm H 45.0 mm |
| Case Material | (add) |
| Drivetrain | |
| Motor Type | (add) |
| Motor Drive | (add) |
| Gears | Plastic |
| Gear Spline/Teeth | (add) |
| Rotation Mode | (add) |
| Rotation/Support | Single Bearing |
| Backlash | (add) |
| Control & Signal | |
| Modulation | Analog |
| Direction | (add) |
| Rotational Range | 180° |
| Mechanical Limit | (add) |
| Pulse Cycle | 20 ms |
| Pulse Width | 500-2500 µs |
| Neutral Position | (add) |
| Dead Band | (add) |
| Refresh Rate | (add) |
| Angle Sensor | (add) |
| Control System | (add) |
| Programmable | (add) |
| Signal Voltage | (add) |
| Electrical & Environment | |
| Operating Voltage | (add) |
| Power Source | (add) |
| Regulator Type | (add) |
| Temperature | (add) |
| Water Rating | (add) |
| Certification | (add) |
| Idle Current | (add) |
| Connectivity | |
| Connector | JR (Universal) |
| Wire Length | (add) |
| Origin | |
| Country of Origin | (add) |
Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.
Quick Actions
Similar Active Servos
Reviews (1)
-
Ian.M
September 15, 2014Application(s): Test servo for firmware development
Comments: The upper pulse length listed may be inaccurate. At 2.4ms my servo was hitting its mechanical end stop. Rotation is approximately 215 deg. from end stop to end stop