Discover XQ-Power Servos in Our eBay Store!

Shop Now
Robbe FS-3003
Standard

Robbe FS-3003

Compatible Hardware

*Based on known specs.

Technical Specifications

Last Updated: 2026-10-10
Identity
Brand Robbe
Product Number S3003
Category Hobby
Performance
Torque
7.4V 48.62 oz-in
6.0V 41.67 oz-in Bottom 10%
Speed
7.4V 0.10 sec/60°
6.0V 0.12 sec/60° Top 10%
Running Current
7.4V 0.200 A
6.0V 0.160 A Average
Stall Current 0.8–0.9 AAbove Average
Physical
Weight 1.27 ozTop 10%
Dimensions L 1.606 in
W 0.791 in
H 1.496 in
Case Material Plastic
Drivetrain
Motor Type 3-pole
Gears Plastic
Gear Spline/Teeth 25 T
Rotation Mode Positional
Rotation/Support Dual Bearings
Control & Signal
Modulation Analog
Rotational Range 90°
Mechanical Limit 45°
Neutral Position 1500 µs
Dead Band 4 µs
Electrical & Environment
Operating Voltage 6–7.4 V
Temperature -10–50 °C
Idle Current 0.020 A
Connectivity
Connector Futaba | JR
Wire Length 300 mm
Origin
Country of Origin German

Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.

Class Comparison

TorqueBottom 10%
Stronger than 8% of 192 Analog Standard servos at 6.0V
SpeedTop 10%
Faster than 94% of 190 Analog Standard servos at 6.0V
WeightTop 10%
Lighter than 93% of 448 Analog Standard servos
Running CurrentAverage
Lower draw than 63% of 50 Analog Standard servos at 6.0V
Stall CurrentAbove Average
Lower draw than 79% of 64 Analog Standard servos

Performance Analysis

Shaft Power 0.64–0.90 W
Power Density0.473 W/in³
More power-dense than 37% of 437 Analog Standard servos
Torque Density1.1575 oz-in/g
Stronger than 26% of 192 Analog Standard servos
Torque-to-Volume Ratio21.93 oz-in/in³
Denser torque than 7% of 192 Analog Standard servos
Speed-to-Weight0.23148 (1/sec·g)
4th-highest speed-to-weight of 190 Analog Standard servos
Speed-Torque Trade-off5.00
Better balanced than 2% of 190 Analog Standard servos
Current-per-Torque Ratio0.0216 A/oz-in
More efficient than 28% of 58 Analog Standard servos
Idle-to-Running Current Ratio0.125
Lower idle draw than 8% of 39 Analog Standard servos
No-Load vs Stall Current Spread5.63
Narrower current spread than 69% of 37 Analog Standard servos
Torque Gain per Volt11.91%/V
More voltage-responsive (torque) than 37% of 145 Analog Standard servos
Speed Gain per Volt14.29%/V
More voltage-responsive (speed) than 49% of 147 Analog Standard servos
Voltage Range Width1.4 V
Wider voltage range than 80% of 229 Analog Standard servos

Similar Active Servos

Reviews of Robbe FS-3003

Be the first to review!

Submit a review of Robbe FS-3003