Discover XQ-Power Servos in Our eBay Store!
Shop Now
Technical Specifications
Last Updated: 2026-10-10
Weight
Dimensions
Torque
Speed
Current
Temp
Wire
| Identity | |
| Brand |  |
| Product Number | S0150 |
| Category | Hobby |
| Performance | |
| Torque |
7.4V
194.46 oz-in
14.00 kg-cm
1.4 N-m
6.0V
194.46 oz-in
14.00 kg-cm
1.4 N-m
Top 10%
|
| Speed |
7.4V
0.14 sec/60°
428.6 deg/s
71.4 RPM
6.0V
0.16 sec/60°
375.0 deg/s
62.5 RPM
Above Average
|
| Running Current |
7.4V
0.065 A
65 mA
6.0V
0.050 A
50 mA
Top 10%
|
| Stall Current | 3.1–3.5 A3100–3500 mABottom 10% |
| Physical | |
| Weight | 2.05 oz58.0 gBelow Average |
| Dimensions |
L 1.606 in W 0.787 in H 1.496 in L 40.8 mm W 20.0 mm H 38.0 mm |
| Drivetrain | |
| Motor Type | 3-pole |
| Gears | Metal |
| Gear Spline/Teeth | 25 T |
| Rotation/Support | Single Bearing |
| Control & Signal | |
| Modulation | Analog |
| Pulse Cycle | 1.5 ms |
| Neutral Position | 1500 µs |
| Dead Band | 4 µs |
| Electrical & Environment | |
| Operating Voltage | 6–7.4 V |
| Temperature | -10–50 °C14–122 °F |
| Idle Current | 0.010 A10 mA |
| Connectivity | |
| Connector | Futaba | JR |
| Wire Length | 300 mm11.81 in |
| Origin | |
| Country of Origin | German |
Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.
Class Comparison
| Torque | Top 10% Stronger than 94% of 192 Analog Standard servos at 6.0V |
| Speed | Above Average Faster than 67% of 190 Analog Standard servos at 6.0V |
| Weight | Below Average Lighter than 16% of 448 Analog Standard servos |
| Running Current | Top 10% Lower draw than 100% of 50 Analog Standard servos at 6.0V |
| Stall Current | Bottom 10% Lower draw than 2% of 64 Analog Standard servos |
Performance Analysis
| Shaft Power | 2.25–2.57 W |
| Power Density | 1.358 W/in³ More power-dense than 91% of 437 Analog Standard servos |
| Torque Density | 3.3528 oz-in/g Stronger than 95% of 192 Analog Standard servos |
| Torque-to-Volume Ratio | 102.84 oz-in/in³ Denser torque than 95% of 192 Analog Standard servos |
| Speed-to-Weight | 0.10776 (1/sec·g) Faster than 40% of 190 Analog Standard servos |
| Speed-Torque Trade-off | 31.11 Better balanced than 87% of 190 Analog Standard servos |
| Current-per-Torque Ratio | 0.0180 A/oz-in More efficient than 56% of 58 Analog Standard servos |
| Idle-to-Running Current Ratio | 0.200 Lower idle draw than 5% of 39 Analog Standard servos |
| No-Load vs Stall Current Spread | 70.00 Narrower current spread than 0% of 37 Analog Standard servos |
| Torque Gain per Volt | 0.00%/V More voltage-responsive (torque) than 0% of 145 Analog Standard servos |
| Speed Gain per Volt | 10.21%/V More voltage-responsive (speed) than 11% of 147 Analog Standard servos |
| Voltage Range Width | 1.4 V Wider voltage range than 81% of 229 Analog Standard servos |
Similar Active Servos
Reviews of Robbe S0150
Be the first to review!