Discover XQ-Power Servos in Our eBay Store!

Shop Now
Hitec HSG-5083MG
Micro Discontinued

Hitec HSG-5083MG

Compatible Hardware

*Spec is estimated from brand data.

Technical Specifications

Last Updated: 2026-10-09
Identity
Brand Hitec
Product Number 35083S
Category Hobby
Discontinued Yes
Performance
Torque
6.0V 26.00 oz-in
4.8V 21.00 oz-in Below Average
Speed
6.0V 0.05 sec/60°
4.8V 0.07 sec/60° Top 10%
Running Current
6.0V 0.360 A
4.8V 0.180 A Average
Stall Current 1.87–2 ABelow Average
Physical
Weight 0.77 ozBottom 10%
Dimensions L 1.14 in
W 0.51 in
H 1.18 in
Drivetrain
Motor Type 3-pole
Gears Metal
Gear Spline/Teeth 24 T estimate
Rotation/Support Single Bearing
Control & Signal
Modulation Digital
Direction Clockwise
Rotational Range 55°
Pulse Cycle 3 ms
Pulse Width 500-1300 µs
Neutral Position 900 µs
Dead Band 1 µs
Angle Sensor Potentiometer
Control System PWM
Electrical & Environment
Operating Voltage 4.8–6 V
Idle Current 0.020 A

Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.

Class Comparison

TorqueBelow Average
Stronger than 30% of 328 Digital Micro servos at 4.8V
SpeedTop 10%
Faster than 93% of 328 Digital Micro servos at 4.8V
WeightBottom 10%
Lighter than 5% of 620 Digital Micro servos
Running CurrentAverage
Lower draw than 42% of 53 Digital Micro servos at 4.8V
Stall CurrentBelow Average
Lower draw than 17% of 194 Digital Micro servos

Performance Analysis

Shaft Power 0.55–0.96 W
Power Density1.402 W/in³
More power-dense than 35% of 590 Digital Micro servos
Torque Density0.9677 oz-in/g
Stronger than 2% of 327 Digital Micro servos
Torque-to-Volume Ratio30.61 oz-in/in³
Denser torque than 6% of 327 Digital Micro servos
Speed-to-Weight0.65833 (1/sec·g)
Faster than 38% of 327 Digital Micro servos
Speed-Torque Trade-off1.47
Better balanced than 17% of 327 Digital Micro servos
Current-per-Torque Ratio0.0952 A/oz-in
More efficient than 10% of 85 Digital Micro servos
Idle-to-Running Current Ratio0.111
Lower idle draw than 25% of 37 Digital Micro servos
No-Load vs Stall Current Spread11.11
Narrower current spread than 23% of 36 Digital Micro servos
Torque Gain per Volt19.84%/V
More voltage-responsive (torque) than 66% of 268 Digital Micro servos
Speed Gain per Volt33.34%/V
More voltage-responsive (speed) than 97% of 273 Digital Micro servos
Voltage Range Width1.2 V
Wider voltage range than 40% of 511 Digital Micro servos
Dead-Band-to-Pulse-Width Ratio0.0013
Finer dead band than 49% of 189 Digital Micro servos

Similar Active Servos

Reviews (1)

  • Titan330

    April 23, 2014

    Application(s): Tail rotor servo for a Thunder Tiger mini titan e325se

    Comments: Extremely fast servo. Very accurate as far as centering. Doesn't heat up like some tail servos. Digital, all metal gears, and lightning fast!

Submit a review of Hitec HSG-5083MG