Discover XQ-Power Servos in Our eBay Store!

Shop Now
Hitec HS-6965HB
Standard Discontinued

Hitec HS-6965HB

Compatible Hardware

*Spec is estimated from brand data.

Technical Specifications

Last Updated: 2026-09-16
Identity
Brand Hitec
Product Number 36965S
Category Hobby
Discontinued Yes
Performance
Torque
6.0V 111.00 oz-in
4.8V 91.60 oz-in Below Average
Speed
6.0V 0.08 sec/60°
4.8V 0.10 sec/60° Above Average
Stall Current 2.4–3 AAverage
Physical
Weight 1.83 ozAbove Average
Dimensions L 1.57 in
W 0.78 in
H 1.45 in
Drivetrain
Motor Type 3-pole
Motor Drive MOS
Gears Plastic
Gear Spline/Teeth 24 T estimate
Shaft Size 5.8 mm
Rotation Mode Positional
Rotation/Support Dual Bearings
Control & Signal
Modulation Digital
Direction Clockwise
Rotational Range 80°
Pulse Cycle 20 ms
Pulse Width 900-2100 µs
Neutral Position 1500 µs
Dead Band 2 µs
Angle Sensor Potentiometer
Control System PWM
Programmable Yes
Electrical & Environment
Operating Voltage 4.8–6 V
Temperature -20–60 °C
Idle Current 0.003 A
Connectivity
Connector JR (Universal)
Wire Length 300 mm
Origin
Country of Origin South Korea

Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.

Class Comparison

TorqueBelow Average
Stronger than 16% of 1043 Digital Standard servos at 4.8V
SpeedAbove Average
Faster than 78% of 1041 Digital Standard servos at 4.8V
WeightAbove Average
Lighter than 84% of 1902 Digital Standard servos
Stall CurrentAverage
Lower draw than 59% of 539 Digital Standard servos

Performance Analysis

Shaft Power 1.69–2.57 W
Power Density1.445 W/in³
More power-dense than 30% of 1759 Digital Standard servos
Torque Density1.7615 oz-in/g
Stronger than 16% of 1036 Digital Standard servos
Torque-to-Volume Ratio51.59 oz-in/in³
Denser torque than 16% of 1042 Digital Standard servos
Speed-to-Weight0.19231 (1/sec·g)
Faster than 85% of 1033 Digital Standard servos
Speed-Torque Trade-off9.16
Better balanced than 12% of 1031 Digital Standard servos
Current-per-Torque Ratio0.0328 A/oz-in
More efficient than 11% of 315 Digital Standard servos
Torque Gain per Volt17.65%/V
More voltage-responsive (torque) than 67% of 850 Digital Standard servos
Speed Gain per Volt20.83%/V
More voltage-responsive (speed) than 84% of 871 Digital Standard servos
Voltage Range Width1.2 V
Wider voltage range than 21% of 1539 Digital Standard servos
Dead-Band-to-Pulse-Width Ratio0.0017
Finer dead band than 45% of 468 Digital Standard servos

Similar Active Servos

Reviews of Hitec HS-6965HB

Be the first to review!

Submit a review of Hitec HS-6965HB