Discover XQ-Power Servos in Our eBay Store!
Shop Now
Technical Specifications
Last Updated: 2026-07-28Identity
Performance
Physical
Drivetrain
Control & Signal
Electrical & Environment
Connectivity
Origin
Preferences are saved automatically.
| Identity | |
| Brand |  |
| Product Number | (add) |
| Category | Hobby |
| Performance | |
| Torque |
6.0V110.00 oz-in7.92 kg-cm0.8 N-m |
| Speed |
6.0V0.09 sec/60°666.7 deg/s111.1 RPM |
| Running Current | (add) |
| Stall Current | (add) |
| Shaft Power | 2.26 W |
| Physical | |
| Weight | 1.80 oz51.0 g |
| Dimensions |
L 1.59 in W 0.79 in H 1.50 in L 40.5 mm W 20.0 mm H 38.0 mm |
| Case Material | (add) |
| Drivetrain | |
| Motor Type | (add) |
| Motor Drive | (add) |
| Gears | Metal |
| Gear Spline/Teeth | 25 T estimate |
| Rotation Mode | (add) |
| Rotation/Support | Dual Bearings |
| Backlash | (add) |
| Control & Signal | |
| Modulation | Analog |
| Direction | (add) |
| Rotational Range | (add) |
| Mechanical Limit | (add) |
| Pulse Cycle | 125 ms |
| Pulse Width | (add) |
| Neutral Position | 1520 µs |
| Dead Band | (add) |
| Refresh Rate | (add) |
| Angle Sensor | (add) |
| Control System | PWM |
| Programmable | (add) |
| Signal Voltage | (add) |
| Electrical & Environment | |
| Operating Voltage | 4.5–6.5 V |
| Power Source | (add) |
| Regulator Type | (add) |
| Temperature | (add) |
| Water Rating | (add) |
| Certification | (add) |
| Idle Current | (add) |
| Connectivity | |
| Connector | JR (Universal) |
| Wire Length | (add) |
| Origin | |
| Country of Origin | Taiwan |
Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.
Quick Actions
Similar Active Servos
Reviews (1)
-
Me
July 1, 2012Application(s): Traxxas Revo model no 5309,throttle/brake
Comments: servo was great,ran about 2 liters of fuel through the truck no worrys at all..then it died,after inspection i found that one of the brushes were faulty,if i pushed on one of the motor termials it would work,but not when i let go..the brush was loosing contact.
maybe i was unlucky?,will not buy again.