Discover XQ-Power Servos in Our eBay Store!
Shop Now
Technical Specifications
Last Updated: 2026-07-28Identity
Performance
Physical
Drivetrain
Control & Signal
Electrical & Environment
Connectivity
Origin
Preferences are saved automatically.
| Identity | |
| Brand |  |
| Product Number | (add) |
| Category | Hobby |
| Discontinued | Yes |
| Performance | |
| Torque |
6.0V
138.00 oz-in
9.94 kg-cm
1.0 N-m
4.8V
111.10 oz-in
8.00 kg-cm
0.8 N-m
|
| Speed |
6.0V
0.10 sec/60°
600.0 deg/s
100.0 RPM
4.8V
0.13 sec/60°
461.5 deg/s
76.9 RPM
|
| Running Current | (add) |
| Stall Current | (add) |
| Shaft Power | 1.58–2.55 W |
| Physical | |
| Weight | 2.19 oz62.0 g |
| Dimensions |
L 1.58 in W 0.79 in H 1.46 in L 40.0 mm W 20.0 mm H 37.0 mm |
| Case Material | (add) |
| Drivetrain | |
| Motor Type | Coreless |
| Motor Drive | (add) |
| Gears | Titanium |
| Gear Spline/Teeth | 24 T estimate |
| Rotation Mode | (add) |
| Rotation/Support | Dual Bearings |
| Backlash | (add) |
| Control & Signal | |
| Modulation | Digital |
| Direction | (add) |
| Rotational Range | (add) |
| Mechanical Limit | (add) |
| Pulse Cycle | 20 ms |
| Pulse Width | 900-2100 µs |
| Neutral Position | (add) |
| Dead Band | (add) |
| Refresh Rate | (add) |
| Angle Sensor | (add) |
| Control System | (add) |
| Programmable | (add) |
| Signal Voltage | (add) |
| Electrical & Environment | |
| Operating Voltage | (add) |
| Power Source | (add) |
| Regulator Type | (add) |
| Temperature | (add) |
| Water Rating | (add) |
| Certification | (add) |
| Idle Current | (add) |
| Connectivity | |
| Connector | (add) |
| Wire Length | (add) |
| Origin | |
| Country of Origin | (add) |
Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.
Quick Actions
Similar Active Servos
Reviews (1)
-
GTRulez
February 1, 2013Application(s): Steering Servo for 1/10 Drift chassis
Comments: So far the best Servo i've ever used!
My transmitter/reciever has over 200hours of rc drifting on it. (Competition,Demo use, always on tight tracks with more cars involved) This servo was installed long before i bought this transmitter, and the HS5965MG still operates like new. even though it isnt equipped with a servo saver in my chassis! There is still no play on the output shaft, even after countless hits! i think its very impressive this servo is still working the way it is, very durable!