Discover XQ-Power Servos in Our eBay Store!

Shop Now
Hitec HS-5475HB
Standard Discontinued

Hitec HS-5475HB

Compatible Hardware

*Spec is estimated from brand data.

Technical Specifications

Last Updated: 2026-09-16
Identity
Brand Hitec
Product Number 35475
Category Hobby
Discontinued Yes
Performance
Torque
6.0V 76.00 oz-in
4.8V 61.00 oz-in Bottom 10%
Speed
6.0V 0.18 sec/60°
4.8V 0.23 sec/60° Bottom 10%
Running Current
6.0V0.090 A
Stall Current 0.9–1.1 ATop 10%
Physical
Weight 1.40 ozTop 10%
Dimensions L 1.50 in
W 0.80 in
H 1.40 in
Drivetrain
Motor Type 3-pole
Motor Drive FET
Gears Plastic
Gear Spline/Teeth 24 T estimate
Shaft Size 5.8 mm
Rotation Mode Positional
Rotation/Support Dual Bearings
Control & Signal
Modulation Digital
Direction Clockwise
Rotational Range 60°
Pulse Cycle 20 ms
Pulse Width 900-2100 µs
Neutral Position 1500 µs
Dead Band 1 µs
Angle Sensor Potentiometer
Control System PWM
Programmable Yes
Signal Voltage 3-5V
Electrical & Environment
Operating Voltage 4.8–6 V
Idle Current 0.003 A
Connectivity
Connector S
Wire Length 300 mm
Origin
Country of Origin South Korea

Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.

Class Comparison

TorqueBottom 10%
Stronger than 7% of 1043 Digital Standard servos at 4.8V
SpeedBottom 10%
Faster than 5% of 1041 Digital Standard servos at 4.8V
WeightTop 10%
Lighter than 96% of 1902 Digital Standard servos
Stall CurrentTop 10%
Lower draw than 97% of 539 Digital Standard servos

Performance Analysis

Shaft Power 0.49–0.78 W
Power Density0.465 W/in³
More power-dense than 3% of 1759 Digital Standard servos
Torque Density1.5365 oz-in/g
Stronger than 11% of 1036 Digital Standard servos
Torque-to-Volume Ratio36.31 oz-in/in³
Denser torque than 7% of 1042 Digital Standard servos
Speed-to-Weight0.10952 (1/sec·g)
Faster than 45% of 1033 Digital Standard servos
Speed-Torque Trade-off14.03
Better balanced than 23% of 1031 Digital Standard servos
Current-per-Torque Ratio0.0180 A/oz-in
More efficient than 37% of 315 Digital Standard servos
Idle-to-Running Current Ratio0.033
No-Load vs Stall Current Spread12.22
Torque Gain per Volt20.49%/V
More voltage-responsive (torque) than 80% of 850 Digital Standard servos
Speed Gain per Volt23.13%/V
More voltage-responsive (speed) than 90% of 871 Digital Standard servos
Voltage Range Width1.2 V
Wider voltage range than 22% of 1539 Digital Standard servos
Dead-Band-to-Pulse-Width Ratio0.0008
Finer dead band than 92% of 468 Digital Standard servos

Similar Active Servos

Reviews (3)

  • Lluis

    September 12, 2018

    Application(s): raptor 50 titan helicopter

    Comments: Servo main rotor, spoiler, elevator, with more than 50 liters of fuel used in many hours of flight no problem with sport flight

  • Harry

    May 29, 2011

    Application(s): Ailerons on my Chip Hyde Double vision Bipe with a DA-50

    Comments: I've had at least 50 flights on this plane and I'm still flying it and I've had no issues with these servos at all. They do a great job

  • THD

    February 20, 2011

    Application(s): THD

    Comments: I RATE THIS SERVO (0) WHEN I TRIED TO USE HS-5475 HB HITEC IT CAUGHT FIRE. YES FIRE. IT BURNED A HOLE IN MY NEW SCALE 1/3 TOP GUN ENTRY.

    EDWARD SIMPSON

Submit a review of Hitec HS-5475HB