Discover XQ-Power Servos in Our eBay Store!

Shop Now
Hitec HS-303
Standard Discontinued

Hitec HS-303

Compatible Hardware

*Based on known specs.

Technical Specifications

Last Updated: 2026-09-13
Identity
Brand Hitec
Product Number 31303S
Category Hobby
Discontinued Yes
Performance
Torque
6.0V 51.38 oz-in
4.8V 41.66 oz-in Bottom 10%
Speed
6.0V 0.15 sec/60°
4.8V 0.19 sec/60° Average
Running Current
4.8V0.150 AAbove Average
Physical
Weight 1.71 ozAverage
Dimensions L 1.57 in
W 0.78 in
H 1.43 in
Case Material Plastic
Drivetrain
Motor Type 3-pole
Gears Plastic
Gear Spline/Teeth 24 T
Rotation Mode Positional
Rotation/Support Bushing
Control & Signal
Modulation Analog
Direction Clockwise
Rotational Range 90°
Mechanical Limit 135°
Pulse Cycle 20 ms
Pulse Width 900-2100 µs
Neutral Position 1500 µs
Dead Band 8 µs
Refresh Rate 50 Hz
Angle Sensor Potentiometer
Control System PWM
Programmable No
Signal Voltage 3-5V
Electrical & Environment
Operating Voltage 4.8–6 V
Power Source Direct
Regulator Type Direct
Temperature -20–60 °C
Idle Current 0.008 A
Connectivity
Connector JR (Universal)
Wire Length 300 mm

Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.

Class Comparison

TorqueBottom 10%
Stronger than 7% of 192 Analog Standard servos at 4.8V
SpeedAverage
Faster than 39% of 190 Analog Standard servos at 4.8V
WeightAverage
Lighter than 50% of 448 Analog Standard servos
Running CurrentAbove Average
Lower draw than 90% of 50 Analog Standard servos at 4.8V

Performance Analysis

Shaft Power 0.41–0.63 W
Power Density0.362 W/in³
More power-dense than 24% of 437 Analog Standard servos
Torque Density0.8590 oz-in/g
Stronger than 4% of 192 Analog Standard servos
Torque-to-Volume Ratio23.79 oz-in/in³
Denser torque than 15% of 192 Analog Standard servos
Speed-to-Weight0.10852 (1/sec·g)
Faster than 41% of 190 Analog Standard servos
Speed-Torque Trade-off7.92
Better balanced than 12% of 190 Analog Standard servos
Idle-to-Running Current Ratio0.053
Lower idle draw than 45% of 39 Analog Standard servos
Torque Gain per Volt19.44%/V
More voltage-responsive (torque) than 72% of 145 Analog Standard servos
Speed Gain per Volt22.22%/V
More voltage-responsive (speed) than 86% of 147 Analog Standard servos
Voltage Range Width1.2 V
Wider voltage range than 63% of 229 Analog Standard servos
Dead-Band-to-Pulse-Width Ratio0.0067
Finer dead band than 19% of 49 Analog Standard servos

Similar Active Servos

Reviews (1)

  • RcDesigner

    May 22, 2011

    Application(s): RC robot

    Comments: Awesome torque, speed is decent, I did a 360 degree mod on this and it works perfectly!

Submit a review of Hitec HS-303