Discover XQ-Power Servos in Our eBay Store!
Shop NowSearch Matches (2,573)
- Weight: Greater than 1.76 ounces (50 grams)
- Torque: Greater than 417 oz-in (30.03 kg-cm / 2.9 N-m) @ 48 volts
Performance
Physical
Drivetrain
Control & Signal
Electrical & Environment
Connectivity
Origin
Preferences are saved automatically.
| Make | Model | Category | Torque | Speed | Stall Current |
Weight | Dimensions (L×W×H) |
Diameter | Size Class |
Case Material |
Motor Type |
Motor Drive |
Gear Material |
Gear Spline/ Teeth |
Rotation | Modulation | Direction | Op. Range |
Mech. Limit |
Pulse Cycle |
Pulse Width |
Neutral Pos. |
Dead Band |
Refresh Rate |
Angle Sensor |
Control System |
Programmable | Op. Voltage |
Power Source |
Regulator Type |
Temperature | Water Rating |
Certification | Connector | Wire Length |
Country of Origin |
Shaft Power |
Shape | Shaft Size |
Resolution | Gear Ratio |
Baud Rate |
Output Power |
Radial Load |
MCU | Operating Modes |
Running Current |
Rotation Mode |
Idle Current |
Backlash | Signal Voltage |
Compare | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| We may earn a commission from your purchase. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Theta | Razor-DH1 | Hobby |
8.4V 416.6 oz-in30.00 kg-cm2.9 N-m 7.4V 388.8 oz-in28.00 kg-cm2.7 N-m 6.0V 361.1 oz-in26.00 kg-cm2.5 N-m 5.0V 333.3 oz-in24.00 kg-cm2.4 N-m |
8.4V 0.07 s/60°857.1 deg/s142.9 RPM 7.4V 0.08 s/60°750.0 deg/s125.0 RPM 6.0V 0.09 s/60°666.7 deg/s111.1 RPM 5.0V 0.11 s/60°555.6 deg/s92.6 RPM |
≤3 A≤3000 mA | 2.12 oz60.0 g | 1.61×0.81×1.16 in 40.9×20.6×29.5 mm | — | Standard | Aluminum | Brushless | (add) | Metal | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | 500–2500 µs | 1520 µs | (add) | 400 Hz | Magnetic Encoder | PWM | Yes | 5–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 300 mm11.81 in | (add) | — | Boxed | — | — | — | — | — | — | — | — | (add) | Standard | (add) | — | — | ||
| Theta | Razor-DT1 | Hobby |
8.4V 180.5 oz-in13.00 kg-cm1.3 N-m 7.4V 166.6 oz-in12.00 kg-cm1.2 N-m 6.0V 152.8 oz-in11.00 kg-cm1.1 N-m 5.0V 138.9 oz-in10.00 kg-cm1.0 N-m |
8.4V 0.06 s/60°1,071.4 deg/s178.6 RPM 7.4V 0.06 s/60°937.5 deg/s156.3 RPM 6.0V 0.07 s/60°833.3 deg/s138.9 RPM 5.0V 0.09 s/60°689.7 deg/s114.9 RPM |
≤3 A≤3000 mA | 1.87 oz53.0 g | 1.61×0.81×1.06 in 40.9×20.6×26.9 mm | — | Low Profile | Aluminum | Brushless | (add) | Metal | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | 500–2500 µs | 1520 µs | (add) | 400 Hz | Magnetic Encoder | PWM | Yes | 5–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 200 mm7.87 in | (add) | — | Boxed | — | — | — | — | — | — | — | — | (add) | Standard | (add) | — | — | ||
| Theta | Razor-T1 | Hobby |
8.4V 277.7 oz-in20.00 kg-cm2.0 N-m 7.4V 263.9 oz-in19.00 kg-cm1.9 N-m 6.0V 250.0 oz-in18.00 kg-cm1.8 N-m 5.0V 236.1 oz-in17.00 kg-cm1.7 N-m |
8.4V 0.04 s/60°1,428.6 deg/s238.1 RPM 7.4V 0.05 s/60°1,276.6 deg/s212.8 RPM 6.0V 0.05 s/60°1,111.1 deg/s185.2 RPM 5.0V 0.06 s/60°967.7 deg/s161.3 RPM |
≤2.6 A≤2600 mA | 2.57 oz73.0 g | 1.57×0.79×1.50 in 39.9×20.1×38.1 mm | — | Standard | Aluminum | Brushless | (add) | Metal | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | 500–2500 µs | 1520 µs | (add) | 400 Hz | Magnetic Encoder | PWM | Yes | 5–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 320 mm12.60 in | (add) | — | Boxed | — | — | — | — | — | — | — | — | (add) | Standard | (add) | — | — | ||
| Theta | Razor-TH1 | Hobby |
8.4V 333.3 oz-in24.00 kg-cm2.4 N-m 7.4V 319.4 oz-in23.00 kg-cm2.3 N-m 6.0V 291.6 oz-in21.00 kg-cm2.1 N-m 5.0V 263.9 oz-in19.00 kg-cm1.9 N-m |
8.4V 0.06 s/60°1,071.4 deg/s178.6 RPM 7.4V 0.06 s/60°937.5 deg/s156.3 RPM 6.0V 0.07 s/60°833.3 deg/s138.9 RPM 5.0V 0.09 s/60°689.7 deg/s114.9 RPM |
≤3 A≤3000 mA | 2.12 oz60.0 g | 1.61×0.81×1.16 in 40.9×20.6×29.5 mm | — | Standard | Aluminum | Brushless | (add) | Metal | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | 500–2500 µs | 1520 µs | (add) | 400 Hz | Magnetic Encoder | PWM | Yes | 5–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 300 mm11.81 in | (add) | — | Boxed | — | — | — | — | — | — | — | — | (add) | Standard | (add) | — | — | ||
| Theta | Razor-X1W | Hobby |
8.4V 722.1 oz-in52.00 kg-cm5.1 N-m 7.4V 652.7 oz-in47.00 kg-cm4.6 N-m 6.0V 583.3 oz-in42.00 kg-cm4.1 N-m 5.0V 513.8 oz-in37.00 kg-cm3.6 N-m |
8.4V 0.12 s/60°500.0 deg/s83.3 RPM 7.4V 0.13 s/60°461.5 deg/s76.9 RPM 6.0V 0.14 s/60°428.6 deg/s71.4 RPM 5.0V 0.16 s/60°375.0 deg/s62.5 RPM |
≤8 A≤8000 mA | 2.57 oz73.0 g | 1.57×0.79×1.50 in 39.9×20.1×38.1 mm | — | Standard | Aluminum | Brushless | (add) | Metal | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | 500–2500 µs | 1520 µs | (add) | 400 Hz | Magnetic Encoder | PWM | Yes | 5–8.4 V | (add) | (add) | (add) | IP67 | (add) | JR (Universal) | 320 mm12.60 in | (add) | — | Boxed | — | — | — | — | — | — | — | — | (add) | Standard | (add) | — | — | ||
| Theta | THL398 | Hobby |
8.4V 416.6 oz-in30.00 kg-cm2.9 N-m 7.4V 375.0 oz-in27.00 kg-cm2.6 N-m 6.0V 319.4 oz-in23.00 kg-cm2.3 N-m 5.0V 277.7 oz-in20.00 kg-cm2.0 N-m |
8.4V 0.10 s/60°600.0 deg/s100.0 RPM 7.4V 0.11 s/60°545.5 deg/s90.9 RPM 6.0V 0.12 s/60°500.0 deg/s83.3 RPM 5.0V 0.13 s/60°461.5 deg/s76.9 RPM |
≤3 A≤3000 mA | 2.57 oz73.0 g | 1.57×0.79×1.50 in 39.9×20.1×38.1 mm | — | Standard | Plastic | Brushless | (add) | Metal | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | 500–2500 µs | 1520 µs | (add) | 400 Hz | Magnetic Encoder | PWM | No | 5–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 300 mm11.81 in | (add) | — | Boxed | — | — | — | — | — | — | — | — | (add) | Standard | (add) | — | — | ||
| Theta | THL782 | Hobby |
8.4V 222.2 oz-in16.00 kg-cm1.6 N-m 7.4V 194.4 oz-in14.00 kg-cm1.4 N-m 6.0V 166.6 oz-in12.00 kg-cm1.2 N-m 5.0V 138.9 oz-in10.00 kg-cm1.0 N-m |
8.4V 0.05 s/60°1,333.3 deg/s222.2 RPM 7.4V 0.05 s/60°1,200.0 deg/s200.0 RPM 6.0V 0.06 s/60°1,052.6 deg/s175.4 RPM 5.0V 0.07 s/60°923.1 deg/s153.8 RPM |
≤4 A≤4000 mA | 2.57 oz73.0 g | 1.57×0.79×1.50 in 39.9×20.1×38.1 mm | — | Standard | Aluminum | Brushless | (add) | Metal | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | 500–2500 µs | 760 µs | (add) | 700 Hz | Magnetic Encoder | PWM | No | 5–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 300 mm11.81 in | (add) | — | Boxed | — | — | — | — | — | — | — | — | (add) | Standard | (add) | — | — | ||
| Theta | THL782H | Hobby |
12.6V 263.9 oz-in19.00 kg-cm1.9 N-m 11.1V 236.1 oz-in17.00 kg-cm1.7 N-m 9.0V 194.4 oz-in14.00 kg-cm1.4 N-m 7.5V 166.6 oz-in12.00 kg-cm1.2 N-m |
12.6V 0.05 s/60°1,333.3 deg/s222.2 RPM 11.1V 0.05 s/60°1,200.0 deg/s200.0 RPM 9.0V 0.06 s/60°1,052.6 deg/s175.4 RPM 7.5V 0.07 s/60°923.1 deg/s153.8 RPM |
≤3.3 A≤3300 mA | 2.57 oz73.0 g | 1.57×0.79×1.50 in 39.9×20.1×38.1 mm | — | Standard | Aluminum | Brushless | (add) | Metal | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | 500–2500 µs | 760 µs | (add) | 1000 Hz | Magnetic Encoder | PWM | No | 7.5–12.6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 300 mm11.81 in | (add) | — | Boxed | — | — | — | — | — | — | — | — | (add) | Standard | (add) | — | — | ||
| Theta | THL787H | Hobby |
12.6V 527.7 oz-in38.00 kg-cm3.7 N-m 11.1V 458.3 oz-in33.00 kg-cm3.2 N-m 9.0V 388.8 oz-in28.00 kg-cm2.7 N-m 7.5V 333.3 oz-in24.00 kg-cm2.4 N-m |
12.6V 0.06 s/60°1,000.0 deg/s166.7 RPM 11.1V 0.07 s/60°857.1 deg/s142.9 RPM 9.0V 0.08 s/60°750.0 deg/s125.0 RPM 7.5V 0.09 s/60°666.7 deg/s111.1 RPM |
≤4 A≤4000 mA | 2.57 oz73.0 g | 1.57×0.79×1.50 in 39.9×20.1×38.1 mm | — | Standard | Aluminum | Brushless | (add) | Metal | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | 500–2500 µs | 1520 µs | (add) | 400 Hz | Magnetic Encoder | PWM | No | 7.5–12.6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 300 mm11.81 in | (add) | — | Boxed | — | — | — | — | — | — | — | — | (add) | Standard | (add) | — | — | ||
| Theta | THL788 | Hobby |
8.4V 444.4 oz-in32.00 kg-cm3.1 N-m 7.4V 388.8 oz-in28.00 kg-cm2.7 N-m 6.0V 319.4 oz-in23.00 kg-cm2.3 N-m 5.0V 277.7 oz-in20.00 kg-cm2.0 N-m |
8.4V 0.08 s/60°750.0 deg/s125.0 RPM 7.4V 0.09 s/60°666.7 deg/s111.1 RPM 6.0V 0.10 s/60°600.0 deg/s100.0 RPM 5.0V 0.11 s/60°545.5 deg/s90.9 RPM |
≤4 A≤4000 mA | 2.57 oz73.0 g | 1.57×0.79×1.50 in 39.9×20.1×38.1 mm | — | Standard | Aluminum | Brushless | (add) | Metal | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | 500–2500 µs | 1520 µs | (add) | 400 Hz | Magnetic Encoder | PWM | No | 5–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 300 mm11.81 in | (add) | — | Boxed | — | — | — | — | — | — | — | — | (add) | Standard | (add) | — | — | ||
| Theta | THL798 | Hobby |
8.4V 555.5 oz-in40.00 kg-cm3.9 N-m 7.4V 499.9 oz-in36.00 kg-cm3.5 N-m 6.0V 444.4 oz-in32.00 kg-cm3.1 N-m 5.0V 388.8 oz-in28.00 kg-cm2.7 N-m |
8.4V 0.09 s/60°666.7 deg/s111.1 RPM 7.4V 0.10 s/60°600.0 deg/s100.0 RPM 6.0V 0.11 s/60°545.5 deg/s90.9 RPM 5.0V 0.12 s/60°500.0 deg/s83.3 RPM |
≤8 A≤8000 mA | 2.57 oz73.0 g | 1.57×0.79×1.50 in 39.9×20.1×38.1 mm | — | Standard | Aluminum | Brushless | (add) | Metal | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | 500–2500 µs | 1520 µs | (add) | 400 Hz | Magnetic Encoder | PWM | No | 5–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 300 mm11.81 in | (add) | — | Boxed | — | — | — | — | — | — | — | — | (add) | Standard | (add) | — | — | ||
| Theta | THL798W | Hobby |
8.4V 555.5 oz-in40.00 kg-cm3.9 N-m 7.4V 499.9 oz-in36.00 kg-cm3.5 N-m 6.0V 444.4 oz-in32.00 kg-cm3.1 N-m 5.0V 388.8 oz-in28.00 kg-cm2.7 N-m |
8.4V 0.09 s/60°666.7 deg/s111.1 RPM 7.4V 0.10 s/60°600.0 deg/s100.0 RPM 6.0V 0.11 s/60°545.5 deg/s90.9 RPM 5.0V 0.12 s/60°500.0 deg/s83.3 RPM |
≤8 A≤8000 mA | 2.57 oz73.0 g | 1.57×0.79×1.50 in 39.9×20.1×38.1 mm | — | Standard | Aluminum | Brushless | (add) | Metal | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | 500–2500 µs | 1520 µs | (add) | 400 Hz | Magnetic Encoder | PWM | No | 5–8.4 V | (add) | (add) | (add) | IP67 | (add) | JR (Universal) | 300 mm11.81 in | (add) | — | Boxed | — | — | — | — | — | — | — | — | (add) | Standard | (add) | — | — | ||
| Tonegawa Seiko | PS-050 | Hobby |
8.4V 690.0 oz-in49.69 kg-cm4.9 N-m 7.2V 580.0 oz-in41.76 kg-cm4.1 N-m 6.0V 480.0 oz-in34.56 kg-cm3.4 N-m 4.8V 350.0 oz-in25.20 kg-cm2.5 N-m |
8.4V 0.21 s/60°285.7 deg/s47.6 RPM 6.0V 0.30 s/60°200.0 deg/s33.3 RPM |
≤4.5 A≤4500 mA | 9.88 oz280.0 g | 2.98×1.75×3.16 in 75.7×44.4×80.3 mm | — | Giant | (add) | 3-pole | (add) | Plastic | 36 | Dual Bearings | Analog | (add) | (add) | (add) | (add) | 910–2110 µs | 1510 µs | 600 µs | (add) | (add) | PWM | (add) | 4.8–8.4 V | (add) | (add) | -10–80°C14.0–176.0°F | (add) | (add) | JR (Universal) | (add) | (add) | 2.96–6.08 W | — | — | — | — | — | — | — | — | — | (add) | (add) | 0.008 A8 mA | — | — | ||
| Tonegawa Seiko | SSPS-105 | Hobby | 12.0V 5,277.0 oz-in379.99 kg-cm37.3 N-m | 12.0V 0.63 s/60°95.2 deg/s15.9 RPM | ≤9 A≤9000 mA | 27.51 oz780.0 g | 5.25×2.50×4.75 in 133.4×63.5×120.6 mm | — | Giant | (add) | Brushed | (add) | (add) | (add) | Analog | (add) | (add) | (add) | (add) | 1110–1910 µs | 1510 µs | 400 µs | (add) | (add) | PWM | (add) | 12–12 V | (add) | (add) | (add) | (add) | (add) | (add) | 1,000 mm39.37 in | (add) | 15.49 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | |||
| Torq | BLS0704T | Hobby |
8.4V 111.1 oz-in8.00 kg-cm0.8 N-m 7.4V 97.2 oz-in7.00 kg-cm0.7 N-m 6.0V 83.3 oz-in6.00 kg-cm0.6 N-m |
8.4V 0.04 s/60°1,714.3 deg/s285.7 RPM 7.4V 0.04 s/60°1,500.0 deg/s250.0 RPM 6.0V 0.05 s/60°1,333.3 deg/s222.2 RPM |
(add) | 2.75 oz78.0 g | 1.59×0.79×1.46 in 40.5×20.0×37.0 mm | — | Standard | Aluminum | Brushless | (add) | Steel | 25 | Digital | (add) | (add) | (add) | 560 ms | 760 µs | 760 µs | (add) | 560 Hz | (add) | (add) | (add) | 6–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 3.42–5.87 W | Boxed | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | |||
| Torq | BLS1604-12 | Hobby |
13.0V 236.1 oz-in17.00 kg-cm1.7 N-m 12.0V 222.2 oz-in16.00 kg-cm1.6 N-m 9.0V 194.4 oz-in14.00 kg-cm1.4 N-m |
13.0V 0.04 s/60°1,500.0 deg/s250.0 RPM 12.0V 0.05 s/60°1,333.3 deg/s222.2 RPM 9.0V 0.06 s/60°1,090.9 deg/s181.8 RPM |
(add) | 2.75 oz78.0 g | 1.59×0.79×1.50 in 40.5×20.0×38.0 mm | — | Standard | Aluminum | Brushless | (add) | (add) | 25 | Digital | (add) | (add) | (add) | 560 ms | 760 µs | 760 µs | (add) | 560 Hz | (add) | (add) | (add) | 9–13 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 6.54–10.91 W | Boxed | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | |||
| Torq | BLS2208 | Hobby |
8.4V 347.2 oz-in25.00 kg-cm2.5 N-m 7.4V 305.5 oz-in22.00 kg-cm2.2 N-m 6.0V 250.0 oz-in18.00 kg-cm1.8 N-m |
8.4V 0.07 s/60°857.1 deg/s142.9 RPM 7.4V 0.08 s/60°750.0 deg/s125.0 RPM 6.0V 0.09 s/60°666.7 deg/s111.1 RPM |
(add) | 2.75 oz78.0 g | 1.59×0.79×1.50 in 40.5×20.0×38.0 mm | — | Standard | Aluminum | Brushless | (add) | Steel | 25 | Digital | (add) | (add) | (add) | 333 ms | 1520 µs | (add) | (add) | 333 Hz | (add) | (add) | (add) | 6–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 5.14–9.17 W | Boxed | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | |||
| Torq | BLS2808-12 | Hobby |
13.0V 416.6 oz-in30.00 kg-cm2.9 N-m 12.0V 388.8 oz-in28.00 kg-cm2.7 N-m 9.0V 347.2 oz-in25.00 kg-cm2.5 N-m |
13.0V 0.07 s/60°857.1 deg/s142.9 RPM 12.0V 0.08 s/60°750.0 deg/s125.0 RPM 9.0V 0.09 s/60°666.7 deg/s111.1 RPM |
(add) | 2.75 oz78.0 g | 1.59×0.79×1.50 in 40.5×20.0×38.0 mm | — | Standard | Aluminum | Brushless | (add) | (add) | 25 | Digital | (add) | (add) | (add) | 560 ms | 760 µs | 760 µs | (add) | 560 Hz | (add) | (add) | (add) | 9–13 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 7.13–11.00 W | Boxed | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | |||
| Torq | BLS5012 | Hobby | 12.0V 763.7 oz-in54.99 kg-cm5.4 N-m | 12.0V 0.11 s/60°545.5 deg/s90.9 RPM | (add) | 2.82 oz80.0 g | 1.59×0.79×1.65 in 40.5×20.0×42.0 mm | — | Standard | Aluminum | Brushless | (add) | Steel | 25 | Digital | (add) | (add) | (add) | (add) | 1000–2000 µs | (add) | (add) | (add) | (add) | (add) | (add) | 9–12 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 12.84 W | Boxed | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | |||
| Torq | BLS8208A | Hobby |
8.4V 1,138.8 oz-in82.00 kg-cm8.0 N-m 7.4V 1,041.6 oz-in75.00 kg-cm7.4 N-m 6.0V 902.7 oz-in65.00 kg-cm6.4 N-m |
8.4V 0.11 s/60°545.5 deg/s90.9 RPM 7.4V 0.12 s/60°500.0 deg/s83.3 RPM 6.0V 0.14 s/60°428.6 deg/s71.4 RPM |
(add) | 2.47 oz70.0 g | 1.59×0.79×1.50 in 40.5×20.0×38.0 mm | — | Standard | Aluminum | Brushless | (add) | Steel | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | 1520 µs | (add) | 333 Hz | (add) | PWM | (add) | 6–8.4 V | (add) | (add) | (add) | IP65 | (add) | JR (Universal) | (add) | (add) | 11.92–19.14 W | Boxed | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Torq | HLX-C | Hobby |
8.2V 486.1 oz-in35.00 kg-cm3.4 N-m 7.4V 416.6 oz-in30.00 kg-cm2.9 N-m 6.0V 333.3 oz-in24.00 kg-cm2.4 N-m |
8.2V 0.07 s/60°857.1 deg/s142.9 RPM 7.4V 0.09 s/60°666.7 deg/s111.1 RPM 6.0V 0.11 s/60°545.5 deg/s90.9 RPM |
(add) | 2.82 oz80.0 g | 1.58×0.79×1.58 in 40.0×20.0×40.0 mm | — | Standard | (add) | Brushless | (add) | Steel | 25 | Digital | (add) | (add) | (add) | 333 ms | 1520 µs | (add) | (add) | 333 Hz | Magnetic Encoder | (add) | (add) | 6–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 5.60–12.84 W | Boxed | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | |||
| Torq | HLX-T | Hobby |
8.2V 180.5 oz-in13.00 kg-cm1.3 N-m 7.4V 152.8 oz-in11.00 kg-cm1.1 N-m 6.0V 125.0 oz-in9.00 kg-cm0.9 N-m |
8.2V 0.03 s/60°2,000.0 deg/s333.3 RPM 7.4V 0.04 s/60°1,714.3 deg/s285.7 RPM 6.0V 0.04 s/60°1,500.0 deg/s250.0 RPM |
(add) | 2.82 oz80.0 g | 1.58×0.79×1.58 in 40.0×20.0×40.0 mm | — | Standard | Aluminum | Brushless | (add) | Steel | 25 | Digital | (add) | (add) | (add) | 560 ms | 760 µs | 760 µs | (add) | 560 Hz | Magnetic Encoder | (add) | (add) | 6–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 5.78–11.13 W | Boxed | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | |||
| Torq | HLX3005 | Hobby |
8.4V 444.3 oz-in31.99 kg-cm3.1 N-m 7.4V 416.6 oz-in30.00 kg-cm2.9 N-m 6.0V 333.2 oz-in23.99 kg-cm2.4 N-m |
8.4V 0.04 s/60°1,714.3 deg/s285.7 RPM 7.4V 0.04 s/60°1,500.0 deg/s250.0 RPM 6.0V 0.05 s/60°1,333.3 deg/s222.2 RPM |
(add) | 2.75 oz78.0 g | 1.59×0.79×1.46 in 40.5×20.0×37.0 mm | — | Standard | Aluminum | Brushless | (add) | Steel | 25 | (add) | Digital | (add) | (add) | (add) | 560 ms | 760 µs | 760 µs | (add) | 560 Hz | Magnetic Encoder | (add) | (add) | 6–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 13.69–23.47 W | Boxed | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Torq | HLX4208C | Hobby |
8.4V 638.8 oz-in46.00 kg-cm4.5 N-m 7.4V 583.2 oz-in41.99 kg-cm4.1 N-m 6.0V 527.7 oz-in38.00 kg-cm3.7 N-m |
8.2V 0.07 s/60°857.1 deg/s142.9 RPM 7.4V 0.09 s/60°666.7 deg/s111.1 RPM 6.0V 0.11 s/60°545.5 deg/s90.9 RPM |
(add) | 2.82 oz80.0 g | 1.58×0.79×1.58 in 40.0×20.0×40.0 mm | — | Standard | Aluminum | Brushless | (add) | Steel | 25 | (add) | Digital | (add) | (add) | (add) | 333 ms | 1520 µs | (add) | (add) | 333 Hz | Magnetic Encoder | (add) | (add) | 6–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 8.87–11.98 W | Boxed | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Tower Hobbies | TS-140 * | Hobby |
6.0V 82.0 oz-in5.90 kg-cm0.6 N-m 4.8V 65.0 oz-in4.68 kg-cm0.5 N-m |
6.0V 0.13 s/60°461.5 deg/s76.9 RPM 4.8V 0.18 s/60°333.3 deg/s55.6 RPM |
(add) | 1.90 oz53.9 g | 1.60×0.80×1.50 in 40.6×20.3×38.1 mm | — | Standard | (add) | 3-pole | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 254 mm10.00 in | (add) | 0.67–1.17 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
Make: Theta
Stall Current: ≤3 A≤3000 mA
Shaft Power: —
Weight: 2.12 oz60.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.61×0.81×1.16 in 40.9×20.6×29.5 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 400 Hz
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: Yes
Op. Voltage: 5–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Theta
Stall Current: ≤3 A≤3000 mA
Shaft Power: —
Weight: 1.87 oz53.0 g
Size Class: Low Profile
Diameter: —
Dimensions: 1.61×0.81×1.06 in 40.9×20.6×26.9 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 400 Hz
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: Yes
Op. Voltage: 5–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 200 mm7.87 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Theta
Stall Current: ≤2.6 A≤2600 mA
Shaft Power: —
Weight: 2.57 oz73.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.50 in 39.9×20.1×38.1 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 400 Hz
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: Yes
Op. Voltage: 5–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 320 mm12.60 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Theta
Stall Current: ≤3 A≤3000 mA
Shaft Power: —
Weight: 2.12 oz60.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.61×0.81×1.16 in 40.9×20.6×29.5 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 400 Hz
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: Yes
Op. Voltage: 5–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Theta
Stall Current: ≤8 A≤8000 mA
Shaft Power: —
Weight: 2.57 oz73.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.50 in 39.9×20.1×38.1 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 400 Hz
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: Yes
Op. Voltage: 5–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: IP67
Certification: (add)
Connector: JR (Universal)
Wire Length: 320 mm12.60 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Theta
Stall Current: ≤3 A≤3000 mA
Shaft Power: —
Weight: 2.57 oz73.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.50 in 39.9×20.1×38.1 mm
Case Material: Plastic
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 400 Hz
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: No
Op. Voltage: 5–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Theta
Stall Current: ≤4 A≤4000 mA
Shaft Power: —
Weight: 2.57 oz73.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.50 in 39.9×20.1×38.1 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 760 µs
Dead Band: (add)
Refresh Rate: 700 Hz
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: No
Op. Voltage: 5–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Theta
Stall Current: ≤3.3 A≤3300 mA
Shaft Power: —
Weight: 2.57 oz73.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.50 in 39.9×20.1×38.1 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 760 µs
Dead Band: (add)
Refresh Rate: 1000 Hz
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: No
Op. Voltage: 7.5–12.6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Theta
Stall Current: ≤4 A≤4000 mA
Shaft Power: —
Weight: 2.57 oz73.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.50 in 39.9×20.1×38.1 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 400 Hz
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: No
Op. Voltage: 7.5–12.6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Theta
Stall Current: ≤4 A≤4000 mA
Shaft Power: —
Weight: 2.57 oz73.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.50 in 39.9×20.1×38.1 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 400 Hz
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: No
Op. Voltage: 5–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Theta
Stall Current: ≤8 A≤8000 mA
Shaft Power: —
Weight: 2.57 oz73.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.50 in 39.9×20.1×38.1 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 400 Hz
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: No
Op. Voltage: 5–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Theta
Stall Current: ≤8 A≤8000 mA
Shaft Power: —
Weight: 2.57 oz73.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.50 in 39.9×20.1×38.1 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 400 Hz
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: No
Op. Voltage: 5–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: IP67
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Tonegawa Seiko
Stall Current: ≤4.5 A≤4500 mA
Shaft Power: 2.96–6.08 W
Weight: 9.88 oz280.0 g
Size Class: Giant
Diameter: —
Dimensions: 2.98×1.75×3.16 in 75.7×44.4×80.3 mm
Case Material: (add)
Motor Type: 3-pole
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 36
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 910–2110 µs
Neutral Pos.: 1510 µs
Dead Band: 600 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–80°C14.0–176.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Tonegawa Seiko
Stall Current: ≤9 A≤9000 mA
Shaft Power: 15.49 W
Weight: 27.51 oz780.0 g
Size Class: Giant
Diameter: —
Dimensions: 5.25×2.50×4.75 in 133.4×63.5×120.6 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: (add)
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 1110–1910 µs
Neutral Pos.: 1510 µs
Dead Band: 400 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 12–12 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: 1,000 mm39.37 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Torq
Stall Current: (add)
Shaft Power: 3.42–5.87 W
Weight: 2.75 oz78.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.79×1.46 in 40.5×20.0×37.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: 560 ms
Pulse Width: 760 µs
Neutral Pos.: 760 µs
Dead Band: (add)
Refresh Rate: 560 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Torq
Stall Current: (add)
Shaft Power: 6.54–10.91 W
Weight: 2.75 oz78.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.79×1.50 in 40.5×20.0×38.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: (add)
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: 560 ms
Pulse Width: 760 µs
Neutral Pos.: 760 µs
Dead Band: (add)
Refresh Rate: 560 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 9–13 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Torq
Stall Current: (add)
Shaft Power: 5.14–9.17 W
Weight: 2.75 oz78.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.79×1.50 in 40.5×20.0×38.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: 333 ms
Pulse Width: 1520 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Torq
Stall Current: (add)
Shaft Power: 7.13–11.00 W
Weight: 2.75 oz78.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.79×1.50 in 40.5×20.0×38.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: (add)
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: 560 ms
Pulse Width: 760 µs
Neutral Pos.: 760 µs
Dead Band: (add)
Refresh Rate: 560 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 9–13 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Torq
Stall Current: (add)
Shaft Power: 12.84 W
Weight: 2.82 oz80.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.79×1.65 in 40.5×20.0×42.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 1000–2000 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 9–12 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Torq
Stall Current: (add)
Shaft Power: 11.92–19.14 W
Weight: 2.47 oz70.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.79×1.50 in 40.5×20.0×38.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: IP65
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Torq
Stall Current: (add)
Shaft Power: 5.60–12.84 W
Weight: 2.82 oz80.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.79×1.58 in 40.0×20.0×40.0 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: 333 ms
Pulse Width: 1520 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: Magnetic Encoder
Control System: (add)
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Torq
Stall Current: (add)
Shaft Power: 5.78–11.13 W
Weight: 2.82 oz80.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.79×1.58 in 40.0×20.0×40.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: 560 ms
Pulse Width: 760 µs
Neutral Pos.: 760 µs
Dead Band: (add)
Refresh Rate: 560 Hz
Angle Sensor: Magnetic Encoder
Control System: (add)
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Torq
Stall Current: (add)
Shaft Power: 13.69–23.47 W
Weight: 2.75 oz78.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.79×1.46 in 40.5×20.0×37.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: 560 ms
Pulse Width: 760 µs
Neutral Pos.: 760 µs
Dead Band: (add)
Refresh Rate: 560 Hz
Angle Sensor: Magnetic Encoder
Control System: (add)
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Torq
Stall Current: (add)
Shaft Power: 8.87–11.98 W
Weight: 2.82 oz80.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.79×1.58 in 40.0×20.0×40.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: 333 ms
Pulse Width: 1520 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: Magnetic Encoder
Control System: (add)
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Tower Hobbies
Stall Current: (add)
Shaft Power: 0.67–1.17 W
Weight: 1.90 oz53.9 g
Size Class: Standard
Diameter: —
Dimensions: 1.60×0.80×1.50 in 40.6×20.3×38.1 mm
Case Material: (add)
Motor Type: 3-pole
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 254 mm10.00 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Quick Tips
- Models with an asterisk (*) have been discontinued.
- Click on any servo model name to see more details about that product.
- Click on any brand name to filter all servos for that brand.
- In the desktop view, click on any column header to sort the table by that attribute. Click again to reverse the order.
Compare Prices for
Unable to load results. Please try again.