Discover XQ-Power Servos in Our eBay Store!
Shop Now
Technical Specifications
Last Updated: 2026-10-24
Weight
Dimensions
Torque
Speed
Current
Temp
Wire
| Identity | |
| Brand |  |
| Product Number | CL6030 |
| Category | Hobby |
| Performance | |
| Torque |
7.4V
416.60 oz-in
30.00 kg-cm
2.9 N-m
6.0V
347.20 oz-in
25.00 kg-cm
2.5 N-m
Above Average
4.8V
263.90 oz-in
19.00 kg-cm
1.9 N-m
|
| Speed |
7.4V
0.11 sec/60°
545.5 deg/s
90.9 RPM
6.0V
0.12 sec/60°
500.0 deg/s
83.3 RPM
Average
4.8V
0.13 sec/60°
461.5 deg/s
76.9 RPM
|
| Running Current |
7.4V
0.400 A
400 mA
6.0V
0.400 A
400 mA
Below Average
4.8V
0.300 A
300 mA
|
| Stall Current | 2.1–3.2 A2100–3200 mAAverage |
| Physical | |
| Weight | 2.43 oz69.0 gAverage |
| Dimensions |
L 1.63 in W 0.80 in H 1.51 in L 41.4 mm W 20.3 mm H 38.4 mm |
| Case Material | Aluminum |
| Drivetrain | |
| Motor Type | Coreless |
| Gears | Titanium / Steel |
| Gear Spline/Teeth | 25 T estimate |
| Rotation Mode | Positional |
| Rotation/Support | Dual Bearings |
| Control & Signal | |
| Modulation | Digital |
| Direction | Counterclockwise |
| Rotational Range | 110° |
| Mechanical Limit | 180° |
| Pulse Cycle | 3.03 ms |
| Pulse Width | 800-2200 µs |
| Neutral Position | 1500 µs |
| Dead Band | 2 µs |
| Refresh Rate | 330 Hz |
| Angle Sensor | Potentiometer |
| Control System | PWM |
| Electrical & Environment | |
| Operating Voltage | 6–7.4 V |
| Temperature | -10–60 °C14–140 °F |
| Water Rating | Waterproof |
| Idle Current | 0.050 A50 mA |
| Connectivity | |
| Connector | JR (Universal) |
| Wire Length | 300 mm11.81 in |
| Origin | |
| Country of Origin | China |
Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.
Class Comparison
| Torque | Above Average Stronger than 77% of 1060 Digital Standard servos at 6.0V |
| Speed | Average Faster than 63% of 1045 Digital Standard servos at 6.0V |
| Weight | Average Lighter than 36% of 1880 Digital Standard servos |
| Running Current | Below Average Lower draw than 23% of 226 Digital Standard servos at 6.0V |
| Stall Current | Average Lower draw than 50% of 570 Digital Standard servos |
Performance Analysis
| Shaft Power | 3.75–7.00 W |
| Power Density | 3.556 W/in³ More power-dense than 67% of 1768 Digital Standard servos |
| Torque Density | 5.0319 oz-in/g Stronger than 79% of 1053 Digital Standard servos |
| Torque-to-Volume Ratio | 176.33 oz-in/in³ Denser torque than 76% of 1058 Digital Standard servos |
| Speed-to-Weight | 0.12077 (1/sec·g) Faster than 55% of 1038 Digital Standard servos |
| Speed-Torque Trade-off | 41.66 Better balanced than 67% of 1034 Digital Standard servos |
| Current-per-Torque Ratio | 0.0092 A/oz-in More efficient than 84% of 331 Digital Standard servos |
| Idle-to-Running Current Ratio | 0.125 Lower idle draw than 28% of 167 Digital Standard servos |
| No-Load vs Stall Current Spread | 8.00 Narrower current spread than 80% of 179 Digital Standard servos |
| Torque Gain per Volt | 14.28%/V More voltage-responsive (torque) than 41% of 873 Digital Standard servos |
| Speed Gain per Volt | 6.50%/V More voltage-responsive (speed) than 3% of 874 Digital Standard servos |
| Voltage Range Width | 1.4 V Wider voltage range than 26% of 1560 Digital Standard servos |
| Dead-Band-to-Pulse-Width Ratio | 0.0014 Finer dead band than 55% of 504 Digital Standard servos |
Similar Active Servos
Reviews of SRT CL6030
Be the first to review!