Discover XQ-Power Servos in Our eBay Store!
Shop NowSearch Matches (5,627)
Performance
Physical
Drivetrain
Control & Signal
Electrical & Environment
Connectivity
Origin
Preferences are saved automatically.
| Make | Model | Category | Torque | Speed | Stall Current |
Weight | Dimensions (L×W×H) |
Diameter | Size Class |
Case Material |
Motor Type |
Motor Drive |
Gear Material |
Gear Spline/ Teeth |
Rotation | Modulation | Direction | Op. Range |
Mech. Limit |
Pulse Cycle |
Pulse Width |
Neutral Pos. |
Dead Band |
Refresh Rate |
Angle Sensor |
Control System |
Programmable | Op. Voltage |
Power Source |
Regulator Type |
Temperature | Water Rating |
Certification | Connector | Wire Length |
Country of Origin |
Shaft Power |
Shape | Shaft Size |
Resolution | Gear Ratio |
Baud Rate |
Output Power |
Radial Load |
MCU | Operating Modes |
Running Current |
Rotation Mode |
Idle Current |
Backlash | Signal Voltage |
Compare | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| We may earn a commission from your purchase. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| GWS | S03N * | Hobby |
6.0V 56.0 oz-in4.03 kg-cm0.4 N-m 4.8V 47.0 oz-in3.38 kg-cm0.3 N-m |
6.0V 0.18 s/60°333.3 deg/s55.6 RPM 4.8V 0.23 s/60°260.9 deg/s43.5 RPM |
(add) | 1.45 oz41.1 g | 1.56×0.79×1.40 in 39.6×20.1×35.6 mm | — | Standard | (add) | (add) | (add) | (add) | 25 | Bushing | Analog | (add) | (add) | (add) | 20 ms | 500–1500 µs | 1500 µs | (add) | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 270 mm10.63 in | (add) | 0.38–0.58 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| GWS | S03N 2BBMG | Hobby |
6.0V 58.0 oz-in4.18 kg-cm0.4 N-m 4.8V 47.0 oz-in3.38 kg-cm0.3 N-m |
6.0V 0.18 s/60°333.3 deg/s55.6 RPM 4.8V 0.23 s/60°260.9 deg/s43.5 RPM |
(add) | 2.26 oz64.1 g | 1.56×0.79×1.40 in 39.6×20.1×35.6 mm | — | Standard | (add) | (add) | (add) | Metal | 25 | Dual Bearings | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Yes | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.38–0.60 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| GWS | S03NF | Hobby |
6.0V 62.0 oz-in4.46 kg-cm0.4 N-m 4.8V 53.0 oz-in3.82 kg-cm0.4 N-m |
6.0V 0.15 s/60°400.0 deg/s66.7 RPM 4.8V 0.18 s/60°333.3 deg/s55.6 RPM |
(add) | 1.45 oz41.1 g | 1.56×0.79×1.40 in 39.6×20.1×35.6 mm | — | Standard | (add) | (add) | (add) | (add) | 25 | (add) | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.54–0.76 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| GWS | S03NF 2BBMG | Hobby |
6.0V 90.0 oz-in6.48 kg-cm0.6 N-m 4.8V 81.0 oz-in5.83 kg-cm0.6 N-m |
6.0V 0.22 s/60°272.7 deg/s45.5 RPM 4.8V 0.27 s/60°222.2 deg/s37.0 RPM |
(add) | 2.26 oz64.1 g | 1.56×0.79×1.40 in 39.6×20.1×35.6 mm | — | Standard | (add) | (add) | (add) | Metal | 25 | Dual Bearings | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Yes | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.55–0.76 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | — | ||
| GWS | S03NXF | Hobby |
6.0V 33.0 oz-in2.38 kg-cm0.2 N-m 4.8V 31.0 oz-in2.23 kg-cm0.2 N-m |
6.0V 0.12 s/60°500.0 deg/s83.3 RPM 4.8V 0.15 s/60°400.0 deg/s66.7 RPM |
(add) | 1.45 oz41.1 g | 1.56×0.79×1.40 in 39.6×20.1×35.6 mm | — | Standard | (add) | DC | (add) | (add) | 25 | Bushing | Analog | (add) | 180° | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | (add) | 4–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.38–0.51 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| GWS | S03NXF 2BBMG * | Hobby |
6.0V 86.0 oz-in6.19 kg-cm0.6 N-m 4.8V 70.0 oz-in5.04 kg-cm0.5 N-m |
6.0V 0.17 s/60°352.9 deg/s58.8 RPM 4.8V 0.21 s/60°285.7 deg/s47.6 RPM |
(add) | 2.26 oz64.1 g | 1.56×0.79×1.40 in 39.6×20.1×35.6 mm | — | Standard | (add) | (add) | (add) | Metal | 25 | Dual Bearings | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.62–0.94 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| GWS | S03T * | Hobby |
6.0V 111.0 oz-in7.99 kg-cm0.8 N-m 4.8V 100.0 oz-in7.20 kg-cm0.7 N-m |
6.0V 0.27 s/60°222.2 deg/s37.0 RPM 4.8V 0.33 s/60°181.8 deg/s30.3 RPM |
(add) | 1.62 oz45.9 g | 1.56×0.79×1.56 in 39.6×20.1×39.6 mm | — | Standard | (add) | (add) | (add) | Metal | 25 | Dual Bearings | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 270 mm10.63 in | (add) | 0.56–0.76 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| GWS | S03T 2BBMG * | Hobby |
6.0V 111.3 oz-in8.01 kg-cm0.8 N-m 4.8V 103.0 oz-in7.42 kg-cm0.7 N-m |
6.0V 0.28 s/60°214.3 deg/s35.7 RPM 4.8V 0.33 s/60°181.8 deg/s30.3 RPM |
(add) | 2.57 oz72.9 g | 1.56×0.79×1.56 in 39.6×20.1×39.6 mm | — | Standard | (add) | (add) | (add) | Metal | 25 | Dual Bearings | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Yes | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.58–0.73 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| GWS | S03TF * | Hobby |
6.0V 90.0 oz-in6.48 kg-cm0.6 N-m 4.8V 81.0 oz-in5.83 kg-cm0.6 N-m |
6.0V 0.22 s/60°272.7 deg/s45.5 RPM 4.8V 0.27 s/60°222.2 deg/s37.0 RPM |
(add) | 1.62 oz45.9 g | 1.56×0.79×1.56 in 39.6×20.1×39.6 mm | — | Standard | (add) | (add) | (add) | (add) | 25 | (add) | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.55–0.76 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| GWS | S03TF 2BBMG * | Hobby |
6.0V 96.0 oz-in6.91 kg-cm0.7 N-m 4.8V 83.0 oz-in5.98 kg-cm0.6 N-m |
6.0V 0.22 s/60°272.7 deg/s45.5 RPM 4.8V 0.27 s/60°222.2 deg/s37.0 RPM |
(add) | 2.57 oz72.9 g | 1.56×0.79×1.56 in 39.6×20.1×39.6 mm | — | Standard | (add) | (add) | (add) | Metal | 25 | Dual Bearings | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.57–0.81 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| GWS | S03TXF * | Hobby |
6.0V 86.0 oz-in6.19 kg-cm0.6 N-m 4.8V 70.0 oz-in5.04 kg-cm0.5 N-m |
6.0V 0.17 s/60°352.9 deg/s58.8 RPM 4.8V 0.21 s/60°285.7 deg/s47.6 RPM |
(add) | 1.62 oz45.9 g | 1.56×0.79×1.56 in 39.6×20.1×39.6 mm | — | Standard | (add) | (add) | (add) | (add) | 25 | (add) | Analog | (add) | 180° | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Yes | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | Taiwan | 0.62–0.94 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | — | ||
| GWS | S03TXF 2BBMG * | Hobby |
6.0V 90.0 oz-in6.48 kg-cm0.6 N-m 4.8V 78.0 oz-in5.62 kg-cm0.6 N-m |
6.0V 0.17 s/60°352.9 deg/s58.8 RPM 4.8V 0.21 s/60°285.7 deg/s47.6 RPM |
(add) | 2.57 oz72.9 g | 1.56×0.79×1.56 in 39.6×20.1×39.6 mm | — | Standard | (add) | (add) | (add) | Metal | 25 | Dual Bearings | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Yes | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.69–0.98 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| GWS | S04 BB * | Hobby |
6.0V 181.0 oz-in13.03 kg-cm1.3 N-m 4.8V 139.0 oz-in10.01 kg-cm1.0 N-m |
6.0V 0.20 s/60°300.0 deg/s50.0 RPM 4.8V 0.25 s/60°240.0 deg/s40.0 RPM |
(add) | 6.63 oz188.0 g | 2.14×1.04×2.03 in 54.4×26.4×51.6 mm | — | Custom | (add) | (add) | (add) | (add) | 25 | Single Bearing | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 1.03–1.67 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| GWS | S11 CL * | Hobby |
6.0V 111.0 oz-in7.99 kg-cm0.8 N-m 4.8V 97.0 oz-in6.98 kg-cm0.7 N-m |
6.0V 0.18 s/60°333.3 deg/s55.6 RPM 4.8V 0.23 s/60°260.9 deg/s43.5 RPM |
(add) | 1.52 oz43.1 g | 1.70×0.85×0.86 in 43.2×21.6×21.8 mm | — | Low Profile | (add) | Coreless | (add) | Metal | (add) | (add) | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.78–1.14 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| GWS | S11 HP * | Hobby |
6.0V 97.0 oz-in6.98 kg-cm0.7 N-m 4.8V 89.0 oz-in6.41 kg-cm0.6 N-m |
6.0V 0.21 s/60°285.7 deg/s47.6 RPM 4.8V 0.21 s/60°285.7 deg/s47.6 RPM |
(add) | 1.06 oz30.1 g | 1.70×0.85×0.86 in 43.2×21.6×21.8 mm | — | Low Profile | (add) | (add) | (add) | (add) | (add) | Dual Bearings | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.78–0.85 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| GWS | S11F 2BBMG * | Hobby | 4.8V 86.1 oz-in6.20 kg-cm0.6 N-m | 4.8V 0.18 s/60°333.3 deg/s55.6 RPM | (add) | 1.52 oz43.0 g | 1.70×0.85×0.86 in 43.2×21.6×21.8 mm | — | Low Profile | (add) | (add) | (add) | Metal | (add) | Dual Bearings | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.88 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| GWS | S11F CL * | Hobby |
6.0V 99.0 oz-in7.13 kg-cm0.7 N-m 4.8V 86.0 oz-in6.19 kg-cm0.6 N-m |
6.0V 0.13 s/60°461.5 deg/s76.9 RPM 4.8V 0.18 s/60°333.3 deg/s55.6 RPM |
(add) | 1.52 oz43.1 g | 1.70×0.85×0.86 in 43.2×21.6×21.8 mm | — | Low Profile | (add) | Coreless | (add) | Metal | (add) | Dual Bearings | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.88–1.41 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| GWS | S11F HP * | Hobby |
6.0V 75.0 oz-in5.40 kg-cm0.5 N-m 4.8V 67.0 oz-in4.82 kg-cm0.5 N-m |
6.0V 0.12 s/60°500.0 deg/s83.3 RPM 4.8V 0.15 s/60°400.0 deg/s66.7 RPM |
(add) | 1.06 oz30.1 g | 1.70×0.85×0.86 in 43.2×21.6×21.8 mm | — | Low Profile | (add) | (add) | (add) | (add) | (add) | (add) | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.83–1.16 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| GWS | S125 1/2T * | Hobby |
6.0V 106.0 oz-in7.63 kg-cm0.7 N-m 4.8V 92.0 oz-in6.62 kg-cm0.6 N-m |
6.0V 0.21 s/60°285.7 deg/s47.6 RPM 4.8V 0.26 s/60°230.8 deg/s38.5 RPM |
(add) | 1.76 oz49.9 g | 1.59×0.79×1.65 in 40.4×20.1×41.9 mm | — | Standard | (add) | (add) | (add) | Plastic | (add) | Dual Bearings | Analog | (add) | 180° | (add) | (add) | 1000–2000 µs | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 270 mm10.63 in | (add) | 0.65–0.93 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | — | ||
| GWS | S125 1T * | Hobby |
6.0V 106.0 oz-in7.63 kg-cm0.7 N-m 4.8V 92.0 oz-in6.62 kg-cm0.6 N-m |
6.0V 0.21 s/60°285.7 deg/s47.6 RPM 4.8V 0.26 s/60°230.8 deg/s38.5 RPM |
(add) | 1.76 oz49.9 g | 1.59×0.79×1.65 in 40.4×20.1×41.9 mm | — | Standard | (add) | (add) | (add) | Plastic | (add) | Dual Bearings | Analog | (add) | 360° | (add) | (add) | 1000–2000 µs | (add) | (add) | (add) | (add) | (add) | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 270 mm10.63 in | (add) | 0.65–0.93 W | — | (add) | — | — | — | — | — | — | — | (add) | Multi-turn | (add) | — | — | ||
| GWS | S136GM * | Hobby |
6.0V 111.0 oz-in7.99 kg-cm0.8 N-m 4.8V 103.0 oz-in7.42 kg-cm0.7 N-m |
6.0V 0.33 s/60°181.8 deg/s30.3 RPM 4.8V 0.50 s/60°120.0 deg/s20.0 RPM |
(add) | 1.20 oz34.0 g | 1.77×0.89×1.13 in 45.0×22.6×28.7 mm | — | Low Profile | (add) | (add) | (add) | Metal | (add) | (add) | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.38–0.62 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| GWS | S15 * | Hobby |
6.0V 128.0 oz-in9.22 kg-cm0.9 N-m 4.8V 108.0 oz-in7.78 kg-cm0.8 N-m |
6.0V 0.13 s/60°461.5 deg/s76.9 RPM 4.8V 0.16 s/60°375.0 deg/s62.5 RPM |
(add) | 2.34 oz66.3 g | 1.59×0.79×1.50 in 40.4×20.1×38.1 mm | — | Standard | (add) | Coreless | (add) | Metal | 25 | Dual Bearings | Analog | (add) | (add) | (add) | (add) | (add) | 1520 µs | (add) | 1500 Hz | (add) | (add) | Yes | 6–8.4 V | (add) | (add) | -10–60°C14.0–140.0°F | (add) | (add) | JR (Universal) | 180 mm7.09 in | Hong Kong | 1.25–1.82 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| GWS | S15 2BBMG * | Hobby | 4.8V 108.3 oz-in7.80 kg-cm0.8 N-m | 4.8V 0.16 s/60°375.0 deg/s62.5 RPM | (add) | 2.34 oz66.4 g | 1.59×0.79×1.48 in 40.4×20.1×37.6 mm | — | Standard | (add) | Coreless | (add) | Metal | (add) | Dual Bearings | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 1.25 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| GWS | S15CLN * | Hobby |
6.0V 128.0 oz-in9.22 kg-cm0.9 N-m 4.8V 108.0 oz-in7.78 kg-cm0.8 N-m |
6.0V 0.13 s/60°461.5 deg/s76.9 RPM 4.8V 0.16 s/60°375.0 deg/s62.5 RPM |
(add) | 2.34 oz66.3 g | 1.59×0.79×1.48 in 40.4×20.1×37.6 mm | — | Standard | (add) | Coreless | (add) | Metal | (add) | (add) | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 1.25–1.82 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| GWS | S15D CL * | Hobby |
6.0V 149.0 oz-in10.73 kg-cm1.1 N-m 4.8V 119.0 oz-in8.57 kg-cm0.8 N-m |
6.0V 0.11 s/60°545.5 deg/s90.9 RPM 4.8V 0.13 s/60°461.5 deg/s76.9 RPM |
(add) | 2.34 oz66.4 g | 1.59×0.79×1.48 in 40.4×20.1×37.6 mm | — | Standard | (add) | Coreless | (add) | Metal | (add) | Single Bearing | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Yes | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 1.69–2.50 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
Make: GWS
Stall Current: (add)
Shaft Power: 0.38–0.58 W
Weight: 1.45 oz41.1 g
Size Class: Standard
Diameter: —
Dimensions: 1.56×0.79×1.40 in 39.6×20.1×35.6 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: (add)
Gear Spline/Teeth: 25
Rotation: Bushing
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: 20 ms
Pulse Width: 500–1500 µs
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 270 mm10.63 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: GWS
Stall Current: (add)
Shaft Power: 0.38–0.60 W
Weight: 2.26 oz64.1 g
Size Class: Standard
Diameter: —
Dimensions: 1.56×0.79×1.40 in 39.6×20.1×35.6 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: Yes
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: GWS
Stall Current: (add)
Shaft Power: 0.54–0.76 W
Weight: 1.45 oz41.1 g
Size Class: Standard
Diameter: —
Dimensions: 1.56×0.79×1.40 in 39.6×20.1×35.6 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: (add)
Gear Spline/Teeth: 25
Rotation: (add)
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: GWS
Stall Current: (add)
Shaft Power: 0.55–0.76 W
Weight: 2.26 oz64.1 g
Size Class: Standard
Diameter: —
Dimensions: 1.56×0.79×1.40 in 39.6×20.1×35.6 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: Yes
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: GWS
Stall Current: (add)
Shaft Power: 0.38–0.51 W
Weight: 1.45 oz41.1 g
Size Class: Standard
Diameter: —
Dimensions: 1.56×0.79×1.40 in 39.6×20.1×35.6 mm
Case Material: (add)
Motor Type: DC
Motor Drive: (add)
Gear Material: (add)
Gear Spline/Teeth: 25
Rotation: Bushing
Modulation: Analog
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: GWS
Stall Current: (add)
Shaft Power: 0.62–0.94 W
Weight: 2.26 oz64.1 g
Size Class: Standard
Diameter: —
Dimensions: 1.56×0.79×1.40 in 39.6×20.1×35.6 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: GWS
Stall Current: (add)
Shaft Power: 0.56–0.76 W
Weight: 1.62 oz45.9 g
Size Class: Standard
Diameter: —
Dimensions: 1.56×0.79×1.56 in 39.6×20.1×39.6 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 270 mm10.63 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: GWS
Stall Current: (add)
Shaft Power: 0.58–0.73 W
Weight: 2.57 oz72.9 g
Size Class: Standard
Diameter: —
Dimensions: 1.56×0.79×1.56 in 39.6×20.1×39.6 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: Yes
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: GWS
Stall Current: (add)
Shaft Power: 0.55–0.76 W
Weight: 1.62 oz45.9 g
Size Class: Standard
Diameter: —
Dimensions: 1.56×0.79×1.56 in 39.6×20.1×39.6 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: (add)
Gear Spline/Teeth: 25
Rotation: (add)
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: GWS
Stall Current: (add)
Shaft Power: 0.57–0.81 W
Weight: 2.57 oz72.9 g
Size Class: Standard
Diameter: —
Dimensions: 1.56×0.79×1.56 in 39.6×20.1×39.6 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: GWS
Stall Current: (add)
Shaft Power: 0.62–0.94 W
Weight: 1.62 oz45.9 g
Size Class: Standard
Diameter: —
Dimensions: 1.56×0.79×1.56 in 39.6×20.1×39.6 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: (add)
Gear Spline/Teeth: 25
Rotation: (add)
Modulation: Analog
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: Yes
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: Taiwan
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: GWS
Stall Current: (add)
Shaft Power: 0.69–0.98 W
Weight: 2.57 oz72.9 g
Size Class: Standard
Diameter: —
Dimensions: 1.56×0.79×1.56 in 39.6×20.1×39.6 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: Yes
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: GWS
Stall Current: (add)
Shaft Power: 1.03–1.67 W
Weight: 6.63 oz188.0 g
Size Class: Custom
Diameter: —
Dimensions: 2.14×1.04×2.03 in 54.4×26.4×51.6 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: (add)
Gear Spline/Teeth: 25
Rotation: Single Bearing
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: GWS
Stall Current: (add)
Shaft Power: 0.78–1.14 W
Weight: 1.52 oz43.1 g
Size Class: Low Profile
Diameter: —
Dimensions: 1.70×0.85×0.86 in 43.2×21.6×21.8 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: GWS
Stall Current: (add)
Shaft Power: 0.78–0.85 W
Weight: 1.06 oz30.1 g
Size Class: Low Profile
Diameter: —
Dimensions: 1.70×0.85×0.86 in 43.2×21.6×21.8 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: (add)
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: GWS
Stall Current: (add)
Shaft Power: 0.88 W
Weight: 1.52 oz43.0 g
Size Class: Low Profile
Diameter: —
Dimensions: 1.70×0.85×0.86 in 43.2×21.6×21.8 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: GWS
Stall Current: (add)
Shaft Power: 0.88–1.41 W
Weight: 1.52 oz43.1 g
Size Class: Low Profile
Diameter: —
Dimensions: 1.70×0.85×0.86 in 43.2×21.6×21.8 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: GWS
Stall Current: (add)
Shaft Power: 0.83–1.16 W
Weight: 1.06 oz30.1 g
Size Class: Low Profile
Diameter: —
Dimensions: 1.70×0.85×0.86 in 43.2×21.6×21.8 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: (add)
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: GWS
Stall Current: (add)
Shaft Power: 0.65–0.93 W
Weight: 1.76 oz49.9 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.79×1.65 in 40.4×20.1×41.9 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 1000–2000 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 270 mm10.63 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: GWS
Stall Current: (add)
Shaft Power: 0.65–0.93 W
Weight: 1.76 oz49.9 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.79×1.65 in 40.4×20.1×41.9 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: 360°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 1000–2000 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 270 mm10.63 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: GWS
Stall Current: (add)
Shaft Power: 0.38–0.62 W
Weight: 1.20 oz34.0 g
Size Class: Low Profile
Diameter: —
Dimensions: 1.77×0.89×1.13 in 45.0×22.6×28.7 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: GWS
Stall Current: (add)
Shaft Power: 1.25–1.82 W
Weight: 2.34 oz66.3 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.79×1.50 in 40.4×20.1×38.1 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 1500 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: Yes
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–60°C14.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 180 mm7.09 in
Country of Origin: Hong Kong
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: GWS
Stall Current: (add)
Shaft Power: 1.25 W
Weight: 2.34 oz66.4 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.79×1.48 in 40.4×20.1×37.6 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: GWS
Stall Current: (add)
Shaft Power: 1.25–1.82 W
Weight: 2.34 oz66.3 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.79×1.48 in 40.4×20.1×37.6 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: GWS
Stall Current: (add)
Shaft Power: 1.69–2.50 W
Weight: 2.34 oz66.4 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.79×1.48 in 40.4×20.1×37.6 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: Yes
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Quick Tips
- Models with an asterisk (*) have been discontinued.
- Click on any servo model name to see more details about that product.
- Click on any brand name to filter all servos for that brand.
- In the desktop view, click on any column header to sort the table by that attribute. Click again to reverse the order.
Compare Prices for
Unable to load results. Please try again.