Discover XQ-Power Servos in Our eBay Store!
Shop Now
Technical Specifications
Last Updated: 2026-07-28Identity
Performance
Physical
Drivetrain
Control & Signal
Electrical & Environment
Connectivity
Origin
Preferences are saved automatically.
| Identity | |
| Brand |  |
| Product Number | S03N STD |
| Category | Hobby |
| Performance | |
| Torque |
6.0V
56.00 oz-in
4.03 kg-cm
0.4 N-m
4.8V
47.00 oz-in
3.38 kg-cm
0.3 N-m
|
| Speed |
6.0V
0.18 sec/60°
333.3 deg/s
55.6 RPM
4.8V
0.23 sec/60°
260.9 deg/s
43.5 RPM
|
| Running Current | (add) |
| Stall Current | (add) |
| Shaft Power | 0.38–0.58 W |
| Physical | |
| Weight | 1.45 oz41.1 g |
| Dimensions |
L 1.56 in W 0.79 in H 1.40 in L 39.6 mm W 20.1 mm H 35.6 mm |
| Case Material | (add) |
| Drivetrain | |
| Motor Type | (add) |
| Motor Drive | (add) |
| Gears | (add) |
| Gear Spline/Teeth | 25 T estimate |
| Rotation Mode | (add) |
| Rotation/Support | (add) |
| Backlash | (add) |
| Control & Signal | |
| Modulation | Analog |
| Direction | (add) |
| Rotational Range | (add) |
| Mechanical Limit | (add) |
| Pulse Cycle | 20 ms |
| Pulse Width | 500-1500 µs |
| Neutral Position | (add) |
| Dead Band | (add) |
| Refresh Rate | (add) |
| Angle Sensor | (add) |
| Control System | (add) |
| Programmable | (add) |
| Signal Voltage | (add) |
| Electrical & Environment | |
| Operating Voltage | (add) |
| Power Source | (add) |
| Regulator Type | (add) |
| Temperature | (add) |
| Water Rating | (add) |
| Certification | (add) |
| Idle Current | (add) |
| Connectivity | |
| Connector | JR (Universal) estimate |
| Wire Length | (add) |
| Origin | |
| Country of Origin | (add) |
Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.
Quick Actions
Similar Active Servos
Reviews (2)
-
robots42
July 28, 2013Application(s): animatronics and robotics
Comments: The specified pulse range for this servo is wrong.
I have used hundreds of S03 and any type that I have used has always had the standard 1000us to 2000us pulse range with extended range of about 500us to 2500us.
I have never managed to strip the gears on an S03 and some have been working in robots since 1998.darwin
August 31, 2010Application(s): for robot's leg
Comments: standar quality