Discover XQ-Power Servos in Our eBay Store!
Shop NowSearch Matches (2,636)
- Weight: Greater than 1.76 ounces (50 grams)
- Torque: Greater than 417 oz-in (30.03 kg-cm / 2.9 N-m) @ 48 volts
Performance
Physical
Drivetrain
Control & Signal
Electrical & Environment
Connectivity
Origin
Preferences are saved automatically.
| Make | Model | Category | Torque | Speed | Stall Current |
Weight | Dimensions (L×W×H) |
Diameter | Size Class |
Case Material |
Motor Type |
Motor Drive |
Gear Material |
Gear Spline/ Teeth |
Rotation | Modulation | Direction | Op. Range |
Mech. Limit |
Pulse Cycle |
Pulse Width |
Neutral Pos. |
Dead Band |
Refresh Rate |
Angle Sensor |
Control System |
Programmable | Op. Voltage |
Power Source |
Regulator Type |
Temperature | Water Rating |
Certification | Connector | Wire Length |
Country of Origin |
Shaft Power |
Shape | Shaft Size |
Resolution | Gear Ratio |
Baud Rate |
Output Power |
Radial Load |
MCU | Operating Modes |
Running Current |
Rotation Mode |
Idle Current |
Backlash | Signal Voltage |
Compare | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| We may earn a commission from your purchase. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| OMG | OMG-A3-35BM | Hobby |
8.4V 528.0 oz-in38.02 kg-cm3.7 N-m 7.4V 486.0 oz-in35.00 kg-cm3.4 N-m |
8.4V 0.08 s/60°800.0 deg/s133.3 RPM 7.4V 0.08 s/60°769.2 deg/s128.2 RPM |
(add) | 2.19 oz62.0 g | 1.57×0.79×1.57 in 39.9×20.1×39.9 mm | — | Standard | Metal | Brushless | (add) | Stainless steel | 25 | Dual Bearings | Digital | (add) | 180° | 180 | (add) | 500–2500 µs | (add) | (add) | 333 Hz | (add) | (add) | Yes | 7.4–8.4 V | (add) | (add) | -15–70°C5.0–158.0°F | Water Resistant | (add) | (add) | 265 mm10.43 in | (add) | 11.52–13.02 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| OMG | OMG-D4-12BF | Hobby |
8.4V 194.0 oz-in13.97 kg-cm1.4 N-m 7.4V 167.0 oz-in12.03 kg-cm1.2 N-m 6.0V 139.0 oz-in10.01 kg-cm1.0 N-m 4.8V 111.0 oz-in7.99 kg-cm0.8 N-m |
8.4V 0.05 s/60°1,333.3 deg/s222.2 RPM 7.4V 0.05 s/60°1,200.0 deg/s200.0 RPM 6.0V 0.06 s/60°1,090.9 deg/s181.8 RPM 4.8V 0.07 s/60°923.1 deg/s153.8 RPM |
≤3.2 A≤3200 mA | 1.87 oz53.0 g | 1.61×0.81×1.02 in 40.9×20.6×25.9 mm | — | Low Profile | Aluminum | Brushless | (add) | Stainless Steel | 25 | Dual Bearings | Digital | (add) | 120° | 120 | (add) | (add) | 1520 µs | (add) | 333 Hz | (add) | PWM | Yes | 4.8–8.4 V | (add) | BEC | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 3.16–7.97 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | 0.550 A550 mA | — | — | ||
| OMG | OMG-D4-16BF | Hobby |
8.4V 250.0 oz-in18.00 kg-cm1.8 N-m 7.4V 236.0 oz-in16.99 kg-cm1.7 N-m 6.0V 208.0 oz-in14.98 kg-cm1.5 N-m 4.8V 180.0 oz-in12.96 kg-cm1.3 N-m |
8.4V 0.06 s/60°1,090.9 deg/s181.8 RPM 7.4V 0.06 s/60°1,000.0 deg/s166.7 RPM 6.0V 0.07 s/60°857.1 deg/s142.9 RPM 4.8V 0.08 s/60°800.0 deg/s133.3 RPM |
≤3.2 A≤3200 mA | 1.87 oz53.0 g | 1.61×0.81×1.02 in 40.9×20.6×25.9 mm | — | Low Profile | Aluminum | Brushless | (add) | Stainless Steel | 25 | Dual Bearings | Digital | (add) | 120° | 120 | (add) | (add) | 1520 µs | (add) | 333 Hz | (add) | PWM | Yes | 4.8–8.4 V | (add) | BEC | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 4.44–8.40 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| OMG | OMG-D4-20BF | Hobby |
8.4V 319.0 oz-in22.97 kg-cm2.3 N-m 7.4V 305.0 oz-in21.96 kg-cm2.2 N-m 6.0V 278.0 oz-in20.02 kg-cm2.0 N-m 4.8V 250.0 oz-in18.00 kg-cm1.8 N-m |
8.4V 0.05 s/60°1,200.0 deg/s200.0 RPM 7.4V 0.06 s/60°1,090.9 deg/s181.8 RPM 6.0V 0.06 s/60°1,000.0 deg/s166.7 RPM 4.8V 0.07 s/60°857.1 deg/s142.9 RPM |
≤3.2 A≤3200 mA | 2.05 oz58.0 g | 1.61×0.81×1.14 in 40.9×20.6×29.0 mm | — | Low Profile | Aluminum | Brushless | (add) | Stainless Steel | 25 | Dual Bearings | Digital | (add) | 120° | 120 | 3.003 ms | (add) | 1520 µs | (add) | 333 Hz | (add) | PWM | Yes | 4.8–8.4 V | (add) | BEC | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 6.60–11.80 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | — | ||
| OMG | OMG-D4-30BF | Hobby |
8.4V 430.0 oz-in30.96 kg-cm3.0 N-m 7.4V 416.0 oz-in29.96 kg-cm2.9 N-m 6.0V 375.0 oz-in27.00 kg-cm2.6 N-m 4.8V 347.0 oz-in24.99 kg-cm2.5 N-m |
8.4V 0.06 s/60°1,000.0 deg/s166.7 RPM 7.4V 0.07 s/60°923.1 deg/s153.8 RPM 6.0V 0.07 s/60°857.1 deg/s142.9 RPM 4.8V 0.08 s/60°800.0 deg/s133.3 RPM |
≤3.2 A≤3200 mA | 2.05 oz58.0 g | 1.61×0.81×1.14 in 40.9×20.6×29.0 mm | — | Low Profile | Aluminum | Brushless | (add) | Stainless Steel | 25 | Dual Bearings | Digital | (add) | 120° | 120 | (add) | (add) | 1520 µs | (add) | 333 Hz | (add) | PWM | (add) | 4.8–8.4 V | (add) | BEC | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 8.55–13.25 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| OMG | OMG-D4-35BF | Hobby |
8.4V 472.0 oz-in33.99 kg-cm3.3 N-m 7.4V 444.0 oz-in31.97 kg-cm3.1 N-m 6.0V 416.0 oz-in29.96 kg-cm2.9 N-m 4.8V 375.0 oz-in27.00 kg-cm2.6 N-m |
8.4V 0.07 s/60°923.1 deg/s153.8 RPM 7.4V 0.07 s/60°857.1 deg/s142.9 RPM 6.0V 0.08 s/60°750.0 deg/s125.0 RPM 4.8V 0.09 s/60°705.9 deg/s117.6 RPM |
≤3.2 A≤3200 mA | 2.05 oz58.0 g | 1.61×0.81×1.14 in 40.9×20.6×29.0 mm | — | Low Profile | Aluminum | Brushless | (add) | Stainless Steel | 25 | Dual Bearings | Digital | (add) | 120° | 120 | (add) | 500–2500 µs | 1520 µs | 2 µs | 333 Hz | (add) | PWM | Yes | 4.8–8.4 V | (add) | BEC | -15–70°C5.0–158.0°F | IP67 | (add) | JR (Universal) | 300 mm11.81 in | (add) | 8.16–13.43 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | 0.550 A550 mA | — | — | ||
| OMG | OMG-H6-XCBF | Hobby |
8.4V 500.0 oz-in36.00 kg-cm3.5 N-m 7.4V 444.0 oz-in31.97 kg-cm3.1 N-m 6.0V 389.0 oz-in28.01 kg-cm2.7 N-m |
8.4V 0.06 s/60°1,000.0 deg/s166.7 RPM 7.4V 0.07 s/60°882.4 deg/s147.1 RPM 6.0V 0.08 s/60°800.0 deg/s133.3 RPM |
(add) | 2.68 oz76.0 g | 1.57×0.79×1.50 in 39.9×20.1×38.1 mm | — | Standard | Metal | Brushless | (add) | Stainless Steel | 25 | Triple Bearings | Digital | (add) | 180° | 180 | (add) | 500–2500 µs | 1520 µs | 2 µs | 333 Hz | (add) | (add) | No | 4.8–8.4 V | (add) | (add) | -15–70°C5.0–158.0°F | Splashproof | (add) | (add) | 300 mm11.81 in | (add) | 9.59–15.41 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | — | ||
| OMG | OMG-R1-20DM | Hobby |
7.4V 319.0 oz-in22.97 kg-cm2.3 N-m 6.0V 306.0 oz-in22.03 kg-cm2.2 N-m |
7.4V 0.11 s/60°535.7 deg/s89.3 RPM 6.0V 0.13 s/60°472.4 deg/s78.7 RPM |
(add) | 1.83 oz52.0 g | 1.61×0.79×1.57 in 40.9×20.1×39.9 mm | — | Standard | Plastic | Brushed | (add) | Stainless steel | 25 | Dual Bearings | Digital | (add) | 180° | 180 | (add) | 500–2500 µs | 1520 µs | 3 µs | 333 Hz | (add) | (add) | No | 6–7.4 V | (add) | (add) | -15–70°C5.0–158.0°F | IP67 | (add) | (add) | 300 mm11.81 in | (add) | 4.46–5.27 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| OMG | OMG-R3-80BF | Hobby |
8.4V 1,111.0 oz-in80.00 kg-cm7.8 N-m 7.4V 1,042.0 oz-in75.03 kg-cm7.4 N-m |
8.4V 0.09 s/60°705.9 deg/s117.6 RPM 7.4V 0.10 s/60°631.6 deg/s105.3 RPM |
(add) | 7.76 oz220.0 g | 2.60×1.18×2.24 in 66.0×30.0×56.9 mm | — | Large | Metal | Brushless | (add) | Stainless Steel | 15 | Dual Bearings | Digital | (add) | 180° | 180 | (add) | 500–2500 µs | 1520 µs | 2 µs | 333 Hz | (add) | (add) | (add) | 7.4–8.4 V | (add) | (add) | -15–70°C5.0–158.0°F | IP67 | (add) | (add) | 300 mm11.81 in | (add) | 20.28–24.17 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| OMG | OMG-R4-100BF | Hobby |
15.0V 1,667.0 oz-in120.04 kg-cm11.8 N-m 12.6V 1,389.0 oz-in100.02 kg-cm9.8 N-m 11.1V 1,250.0 oz-in90.01 kg-cm8.8 N-m |
15.0V 0.15 s/60°400.0 deg/s66.7 RPM 12.6V 0.17 s/60°352.9 deg/s58.8 RPM 11.1V 0.18 s/60°333.3 deg/s55.6 RPM |
(add) | 9.91 oz281.0 g | 2.60×1.18×2.30 in 66.0×30.0×58.4 mm | — | Large | Metal | Brushed | (add) | Stainless steel | 15 | Dual Bearings | Digital | (add) | 180° | 180 | (add) | 500–2500 µs | 1520 µs | 2 µs | 333 Hz | (add) | (add) | (add) | 11.1–12.6 V | (add) | (add) | -15–70°C5.0–158.0°F | IP67 | (add) | (add) | 300 mm11.81 in | China | 12.84–20.55 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| OMG | OMG-R4-25BF | Hobby |
7.4V 331.0 oz-in23.83 kg-cm2.3 N-m 6.0V 306.0 oz-in22.03 kg-cm2.2 N-m 4.8V 257.0 oz-in18.51 kg-cm1.8 N-m |
7.4V 0.05 s/60°1,276.6 deg/s212.8 RPM 6.0V 0.05 s/60°1,200.0 deg/s200.0 RPM 4.8V 0.07 s/60°923.1 deg/s153.8 RPM |
(add) | 2.61 oz74.0 g | 1.60×0.81×1.39 in 40.6×20.6×35.3 mm | — | Standard | Aluminum | Brushless | (add) | Stainless steel | 25 | Dual Bearings | Digital | (add) | 180° | 180 | (add) | 500–2500 µs | 1520 µs | 3 µs | 333 Hz | (add) | PWM | No | 4.8–7.4 V | (add) | (add) | -15–70°C5.0–158.0°F | IP67 | (add) | (add) | 300 mm11.81 in | China | 7.31–13.02 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | 3-5V | ||
| OMG | OMG-R5-55BF | Hobby |
8.4V 786.0 oz-in56.60 kg-cm5.6 N-m 7.4V 722.1 oz-in52.00 kg-cm5.1 N-m 6.0V 624.9 oz-in45.00 kg-cm4.4 N-m |
8.4V 0.10 s/60°631.6 deg/s105.3 RPM 7.4V 0.11 s/60°571.4 deg/s95.2 RPM 6.0V 0.13 s/60°480.0 deg/s80.0 RPM |
(add) | 3.10 oz88.0 g | 1.59×0.83×1.65 in 40.4×21.1×41.9 mm | — | Standard | Metal | Brushless | (add) | Titanium / Steel | 25 | Dual Bearings | Digital | (add) | 180° | 180 | (add) | 500–2500 µs | 1500 µs | 2 µs | 333 Hz | (add) | (add) | No | 6–8.4 V | (add) | (add) | -15–70°C5.0–158.0°F | IP67 | (add) | (add) | 330 mm12.99 in | (add) | 9.24–15.30 W | — | 5.9 mm | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| OMG | OMG-R5-65BF | Hobby |
8.4V 903.0 oz-in65.02 kg-cm6.4 N-m 7.4V 833.0 oz-in59.98 kg-cm5.9 N-m |
8.4V 0.10 s/60°631.6 deg/s105.3 RPM 7.4V 0.09 s/60°705.9 deg/s117.6 RPM |
(add) | 3.56 oz101.0 g | 1.59×0.83×1.65 in 40.4×21.1×41.9 mm | — | Standard | Metal | Brushless | (add) | Stainless Steel | 25 | 6 | Digital | (add) | 180° | 180 | 3.003 ms | 500–2500 µs | 1520 µs | 3 µs | 333 Hz | Magnetic Encoder | Digital (Brushless) | No | 5–8.4 V | (add) | (add) | -15–70°C5.0–158.0°F | IP68 | (add) | (add) | 330 mm12.99 in | (add) | 17.58–18.12 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | — | ||
| OMG | OMG-ST-20DM-PRO | Hobby |
8.4V 333.0 oz-in23.98 kg-cm2.4 N-m 7.4V 306.0 oz-in22.03 kg-cm2.2 N-m |
8.4V 0.15 s/60°400.0 deg/s66.7 RPM 7.4V 0.16 s/60°375.0 deg/s62.5 RPM |
(add) | 2.29 oz65.0 g | 1.61×0.79×1.57 in 40.9×20.1×39.9 mm | — | Standard | Metal / Plastic | Brushed | (add) | Copper | 25 | Dual Bearings | Digital | (add) | 180° | 180 | (add) | 500–2500 µs | 1520 µs | 2 µs | 333 Hz | (add) | (add) | No | 7.4–8.4 V | (add) | (add) | -15–70°C5.0–158.0°F | Water Resistant | (add) | (add) | 300 mm11.81 in | (add) | 3.54–4.10 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | — | ||
| OMG | OMG-ST-25DF | Hobby |
8.4V 345.0 oz-in24.84 kg-cm2.4 N-m 7.4V 317.0 oz-in22.83 kg-cm2.2 N-m |
8.4V 0.11 s/60°535.7 deg/s89.3 RPM 7.4V 0.13 s/60°472.4 deg/s78.7 RPM 4.8V 0.15 s/60°405.4 deg/s67.6 RPM |
3.8–4.7 A3800–4700 mA | 2.61 oz74.0 g | 1.60×0.81×1.56 in 40.6×20.6×39.6 mm | — | Standard | Aluminum | Brushed | (add) | Stainless steel | 25 | Dual Bearings | Digital | (add) | 150° | 180 | (add) | 500–2500 µs | 1520 µs | 2 µs | 333 Hz | Potentiometer | PWM | No | 6–7.4 V | (add) | (add) | -10–50°C14.0–122.0°F | IP67 | (add) | JR (Universal) | 300 mm11.81 in | (add) | 4.62–5.70 W | — | (add) | — | — | — | — | — | — | — | 0.100 A @ 7.4V100 mA @ 7.4V | (add) | 0.005 A5 mA | 2.000° | 3-5V | ||
| OMG | OMG-ST-40BF | Hobby |
8.4V 556.0 oz-in40.04 kg-cm3.9 N-m 7.4V 528.0 oz-in38.02 kg-cm3.7 N-m |
8.4V 0.07 s/60°923.1 deg/s153.8 RPM 7.4V 0.08 s/60°769.2 deg/s128.2 RPM |
(add) | 2.79 oz79.0 g | 1.57×0.79×1.50 in 39.9×20.1×38.1 mm | — | Standard | Metal | Brushless | (add) | Titanium / Steel | 25 | Dual Bearings | Digital | (add) | 180° | 180 | (add) | 500–2500 µs | 1520 µs | 2 µs | 333 Hz | (add) | (add) | Yes | 6–8.4 V | (add) | (add) | -15–70°C5.0–158.0°F | IP67 | (add) | (add) | 300 mm11.81 in | (add) | 12.52–15.82 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | — | ||
| OMG | OMG-ST-55BF | Hobby |
8.4V 784.6 oz-in56.50 kg-cm5.5 N-m 7.4V 722.1 oz-in52.00 kg-cm5.1 N-m 6.0V 624.9 oz-in45.00 kg-cm4.4 N-m |
8.4V 0.10 s/60°631.6 deg/s105.3 RPM 7.4V 0.11 s/60°571.4 deg/s95.2 RPM 6.0V 0.13 s/60°480.0 deg/s80.0 RPM |
(add) | 3.10 oz88.0 g | 1.57×0.79×1.63 in 39.9×20.1×41.4 mm | — | Standard | Metal | Brushless | (add) | Stainless Steel | 25 | Dual Bearings | Digital | (add) | 220° | 180 | (add) | 500–2500 µs | 1520 µs | 2 µs | 333 Hz | (add) | (add) | Yes | 6–8.4 V | (add) | (add) | -15–70°C5.0–158.0°F | IP67 | (add) | (add) | 315 mm12.40 in | (add) | 9.24–15.27 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | — | ||
| Outrage | BL 9080 * | Hobby |
8.4V 132.9 oz-in9.57 kg-cm0.9 N-m 7.4V 112.4 oz-in8.09 kg-cm0.8 N-m 6.0V 88.3 oz-in6.36 kg-cm0.6 N-m |
8.4V 0.05 s/60°1,200.0 deg/s200.0 RPM 7.4V 0.06 s/60°1,000.0 deg/s166.7 RPM 6.0V 0.07 s/60°857.1 deg/s142.9 RPM |
(add) | 2.15 oz61.0 g | 1.571×0.791×1.52 in 39.9×20.1×38.6 mm | — | Standard | (add) | Brushless | (add) | Titanium | (add) | Dual Bearings | Digital | (add) | (add) | (add) | 5 ms | (add) | 1520 µs | (add) | 200 Hz | (add) | (add) | (add) | 5.2–8.4 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 2.33–4.91 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Outrage | BL 9088 * | Hobby |
8.4V 91.6 oz-in6.60 kg-cm0.6 N-m 7.4V 78.5 oz-in5.65 kg-cm0.6 N-m 6.0V 63.5 oz-in4.57 kg-cm0.4 N-m |
8.4V 0.03 s/60°2,000.0 deg/s333.3 RPM 7.4V 0.04 s/60°1,500.0 deg/s250.0 RPM 6.0V 0.05 s/60°1,200.0 deg/s200.0 RPM |
(add) | 2.15 oz61.0 g | 1.57×0.79×1.52 in 39.9×20.1×38.6 mm | — | Standard | (add) | Brushless | (add) | Titanium | (add) | Dual Bearings | Digital | (add) | (add) | (add) | 1.79 ms | (add) | 760 µs | (add) | 560 Hz | (add) | (add) | (add) | 5.2–8.4 V | 2S LiPo | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 2.35–5.65 W | — | (add) | — | — | — | — | — | — | Rudder | (add) | (add) | (add) | — | — | ||
| Outrage | BL 9180 * | Hobby |
8.4V 245.7 oz-in17.69 kg-cm1.7 N-m 7.4V 226.3 oz-in16.29 kg-cm1.6 N-m 6.0V 183.2 oz-in13.19 kg-cm1.3 N-m |
8.4V 0.10 s/60°600.0 deg/s100.0 RPM 7.4V 0.11 s/60°545.5 deg/s90.9 RPM 6.0V 0.13 s/60°461.5 deg/s76.9 RPM |
(add) | 2.51 oz71.1 g | 1.57×0.79×1.52 in 39.9×20.1×38.6 mm | — | Standard | Aluminum | Brushless | (add) | Titanium | (add) | Triple Bearings | Digital | (add) | (add) | (add) | 5 ms | (add) | 1520 µs | (add) | 200 Hz | (add) | PWM | (add) | 5.2–8.4 V | 2S LiPo | Direct | (add) | (add) | (add) | (add) | (add) | (add) | 2.61–4.54 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Outrage | BL 9188 * | Hobby |
8.4V 83.3 oz-in6.00 kg-cm0.6 N-m 7.4V 76.3 oz-in5.50 kg-cm0.5 N-m 6.0V 61.8 oz-in4.45 kg-cm0.4 N-m |
8.4V 0.03 s/60°1,764.7 deg/s294.1 RPM 7.4V 0.04 s/60°1,621.6 deg/s270.3 RPM 6.0V 0.05 s/60°1,333.3 deg/s222.2 RPM |
(add) | 2.15 oz61.0 g | 1.57×0.79×1.52 in 39.9×20.1×38.6 mm | — | Standard | Aluminum | Brushless | (add) | Titanium | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | 760 µs | (add) | (add) | (add) | PWM | (add) | 5.2–8.4 V | 2S LiPo | Direct | (add) | (add) | (add) | (add) | (add) | (add) | 2.54–4.53 W | — | (add) | — | — | — | — | — | — | Position | (add) | Positional | (add) | — | — | ||
| Oxidean Marine | OPS01L | Hobby |
8.4V 388.8 oz-in28.00 kg-cm2.7 N-m 7.4V 347.2 oz-in25.00 kg-cm2.5 N-m 6.0V 277.7 oz-in20.00 kg-cm2.0 N-m 5.0V 250.0 oz-in18.00 kg-cm1.8 N-m |
8.4V 0.05 s/60°1,200.0 deg/s200.0 RPM 7.4V 0.06 s/60°1,000.0 deg/s166.7 RPM 6.0V 0.07 s/60°857.1 deg/s142.9 RPM 5.0V 0.08 s/60°750.0 deg/s125.0 RPM |
(add) | 2.26 oz64.0 g | 1.57×0.79×0.94 in 39.9×20.1×23.9 mm | — | Low Profile | Aluminum | Coreless | (add) | Steel | 25 | Dual Bearings | Digital | (add) | (add) | (add) | 3.03 ms | (add) | 1520 µs | 2 µs | 330 Hz | (add) | PWM | (add) | 5–8.4 V | (add) | (add) | (add) | Waterproof | (add) | JR (Universal) | 320 mm12.60 in | (add) | — | Boxed | (add) | — | — | — | — | — | — | — | (add) | Standard | (add) | — | — | ||
| Oxidean Marine | OPSL-02 | Hobby |
8.4V 388.8 oz-in28.00 kg-cm2.7 N-m 7.4V 347.2 oz-in25.00 kg-cm2.5 N-m 6.0V 277.7 oz-in20.00 kg-cm2.0 N-m 5.0V 250.0 oz-in18.00 kg-cm1.8 N-m |
8.4V 0.05 s/60°1,200.0 deg/s200.0 RPM 7.4V 0.06 s/60°1,000.0 deg/s166.7 RPM 6.0V 0.07 s/60°857.1 deg/s142.9 RPM 5.0V 0.08 s/60°750.0 deg/s125.0 RPM |
(add) | 2.26 oz64.0 g | 1.57×0.79×0.94 in 39.9×20.1×23.9 mm | — | Low Profile | Aluminum | Coreless | (add) | Steel | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | 1520 µs | 2 µs | 330 Hz | (add) | PWM | (add) | 5–8.4 V | (add) | (add) | (add) | Waterproof | (add) | JR (Universal) | 320 mm12.60 in | (add) | — | Boxed | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | — | ||
| Perfect Pass RC | Monster | Hobby |
8.4V 777.7 oz-in56.00 kg-cm5.5 N-m 7.4V 666.6 oz-in48.00 kg-cm4.7 N-m 6.0V 583.3 oz-in42.00 kg-cm4.1 N-m |
8.4V 0.10 s/60°618.6 deg/s103.1 RPM 7.4V 0.11 s/60°531.0 deg/s88.5 RPM 6.0V 0.14 s/60°441.2 deg/s73.5 RPM |
4.2–5.5 A4200–5500 mA | 4.59 oz130.0 g | 1.57×0.79×1.48 in 39.9×20.1×37.6 mm | — | Standard | Aluminum | Brushless | (add) | Metal | 25 | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | (add) | 6–8.4 V | (add) | (add) | (add) | IP67 | (add) | (add) | (add) | (add) | 7.93–14.82 W | Boxed | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | — | ||
| Perfect Pass RC | Monster XL | Hobby |
8.4V 1,527.6 oz-in110.00 kg-cm10.8 N-m 7.4V 1,249.9 oz-in90.00 kg-cm8.8 N-m 6.0V 1,083.2 oz-in78.00 kg-cm7.6 N-m |
8.4V 0.10 s/60°625.0 deg/s104.2 RPM 7.4V 0.11 s/60°555.6 deg/s92.6 RPM 6.0V 0.13 s/60°454.5 deg/s75.8 RPM |
9.7–12.8 A9700–12800 mA | 7.76 oz220.0 g | 2.63×1.18×2.38 in 66.8×30.0×60.5 mm | — | Giant | Aluminum | Brushless | (add) | Steel | 15 | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | (add) | 6–8.4 V | (add) | (add) | (add) | Waterproof | (add) | (add) | (add) | (add) | 15.17–29.42 W | Boxed | (add) | — | — | — | — | — | — | — | (add) | Standard | (add) | — | — | ||
Make: OMG
Stall Current: (add)
Shaft Power: 11.52–13.02 W
Weight: 2.19 oz62.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.57 in 39.9×20.1×39.9 mm
Case Material: Metal
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Stainless steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: 180
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: Yes
Op. Voltage: 7.4–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -15–70°C5.0–158.0°F
Water Rating: Water Resistant
Certification: (add)
Connector: (add)
Wire Length: 265 mm10.43 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: OMG
Stall Current: ≤3.2 A≤3200 mA
Shaft Power: 3.16–7.97 W
Weight: 1.87 oz53.0 g
Size Class: Low Profile
Diameter: —
Dimensions: 1.61×0.81×1.02 in 40.9×20.6×25.9 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Stainless Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 120°
Mech. Limit: 120
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: PWM
Programmable: Yes
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: BEC
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: OMG
Stall Current: ≤3.2 A≤3200 mA
Shaft Power: 4.44–8.40 W
Weight: 1.87 oz53.0 g
Size Class: Low Profile
Diameter: —
Dimensions: 1.61×0.81×1.02 in 40.9×20.6×25.9 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Stainless Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 120°
Mech. Limit: 120
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: PWM
Programmable: Yes
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: BEC
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: OMG
Stall Current: ≤3.2 A≤3200 mA
Shaft Power: 6.60–11.80 W
Weight: 2.05 oz58.0 g
Size Class: Low Profile
Diameter: —
Dimensions: 1.61×0.81×1.14 in 40.9×20.6×29.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Stainless Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 120°
Mech. Limit: 120
Pulse Cycle: 3.003 ms
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: PWM
Programmable: Yes
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: BEC
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: OMG
Stall Current: ≤3.2 A≤3200 mA
Shaft Power: 8.55–13.25 W
Weight: 2.05 oz58.0 g
Size Class: Low Profile
Diameter: —
Dimensions: 1.61×0.81×1.14 in 40.9×20.6×29.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Stainless Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 120°
Mech. Limit: 120
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: BEC
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: OMG
Stall Current: ≤3.2 A≤3200 mA
Shaft Power: 8.16–13.43 W
Weight: 2.05 oz58.0 g
Size Class: Low Profile
Diameter: —
Dimensions: 1.61×0.81×1.14 in 40.9×20.6×29.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Stainless Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 120°
Mech. Limit: 120
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1520 µs
Dead Band: 2 µs
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: PWM
Programmable: Yes
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: BEC
Temperature: -15–70°C5.0–158.0°F
Water Rating: IP67
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: OMG
Stall Current: (add)
Shaft Power: 9.59–15.41 W
Weight: 2.68 oz76.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.50 in 39.9×20.1×38.1 mm
Case Material: Metal
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Stainless Steel
Gear Spline/Teeth: 25
Rotation: Triple Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: 180
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1520 µs
Dead Band: 2 µs
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: No
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -15–70°C5.0–158.0°F
Water Rating: Splashproof
Certification: (add)
Connector: (add)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: OMG
Stall Current: (add)
Shaft Power: 4.46–5.27 W
Weight: 1.83 oz52.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.61×0.79×1.57 in 40.9×20.1×39.9 mm
Case Material: Plastic
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Stainless steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: 180
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1520 µs
Dead Band: 3 µs
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: No
Op. Voltage: 6–7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -15–70°C5.0–158.0°F
Water Rating: IP67
Certification: (add)
Connector: (add)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: OMG
Stall Current: (add)
Shaft Power: 20.28–24.17 W
Weight: 7.76 oz220.0 g
Size Class: Large
Diameter: —
Dimensions: 2.60×1.18×2.24 in 66.0×30.0×56.9 mm
Case Material: Metal
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Stainless Steel
Gear Spline/Teeth: 15
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: 180
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1520 µs
Dead Band: 2 µs
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 7.4–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -15–70°C5.0–158.0°F
Water Rating: IP67
Certification: (add)
Connector: (add)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: OMG
Stall Current: (add)
Shaft Power: 12.84–20.55 W
Weight: 9.91 oz281.0 g
Size Class: Large
Diameter: —
Dimensions: 2.60×1.18×2.30 in 66.0×30.0×58.4 mm
Case Material: Metal
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Stainless steel
Gear Spline/Teeth: 15
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: 180
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1520 µs
Dead Band: 2 µs
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 11.1–12.6 V
Power Source: (add)
Regulator Type: (add)
Temperature: -15–70°C5.0–158.0°F
Water Rating: IP67
Certification: (add)
Connector: (add)
Wire Length: 300 mm11.81 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: OMG
Stall Current: (add)
Shaft Power: 7.31–13.02 W
Weight: 2.61 oz74.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.60×0.81×1.39 in 40.6×20.6×35.3 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Stainless steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: 180
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1520 µs
Dead Band: 3 µs
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: PWM
Programmable: No
Op. Voltage: 4.8–7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -15–70°C5.0–158.0°F
Water Rating: IP67
Certification: (add)
Connector: (add)
Wire Length: 300 mm11.81 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: OMG
Stall Current: (add)
Shaft Power: 9.24–15.30 W
Weight: 3.10 oz88.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.83×1.65 in 40.4×21.1×41.9 mm
Case Material: Metal
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Titanium / Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: 180
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 2 µs
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: No
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -15–70°C5.0–158.0°F
Water Rating: IP67
Certification: (add)
Connector: (add)
Wire Length: 330 mm12.99 in
Country of Origin: (add)
Shape: —
Shaft Size: 5.9 mm
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: OMG
Stall Current: (add)
Shaft Power: 17.58–18.12 W
Weight: 3.56 oz101.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.83×1.65 in 40.4×21.1×41.9 mm
Case Material: Metal
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Stainless Steel
Gear Spline/Teeth: 25
Rotation: 6
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: 180
Pulse Cycle: 3.003 ms
Pulse Width: 500–2500 µs
Neutral Pos.: 1520 µs
Dead Band: 3 µs
Refresh Rate: 333 Hz
Angle Sensor: Magnetic Encoder
Control System: Digital (Brushless)
Programmable: No
Op. Voltage: 5–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -15–70°C5.0–158.0°F
Water Rating: IP68
Certification: (add)
Connector: (add)
Wire Length: 330 mm12.99 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: OMG
Stall Current: (add)
Shaft Power: 3.54–4.10 W
Weight: 2.29 oz65.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.61×0.79×1.57 in 40.9×20.1×39.9 mm
Case Material: Metal / Plastic
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Copper
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: 180
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1520 µs
Dead Band: 2 µs
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: No
Op. Voltage: 7.4–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -15–70°C5.0–158.0°F
Water Rating: Water Resistant
Certification: (add)
Connector: (add)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: OMG
Stall Current: 3.8–4.7 A3800–4700 mA
Shaft Power: 4.62–5.70 W
Weight: 2.61 oz74.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.60×0.81×1.56 in 40.6×20.6×39.6 mm
Case Material: Aluminum
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Stainless steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 150°
Mech. Limit: 180
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1520 µs
Dead Band: 2 µs
Refresh Rate: 333 Hz
Angle Sensor: Potentiometer
Control System: PWM
Programmable: No
Op. Voltage: 6–7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–50°C14.0–122.0°F
Water Rating: IP67
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: OMG
Stall Current: (add)
Shaft Power: 12.52–15.82 W
Weight: 2.79 oz79.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.50 in 39.9×20.1×38.1 mm
Case Material: Metal
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Titanium / Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: 180
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1520 µs
Dead Band: 2 µs
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: Yes
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -15–70°C5.0–158.0°F
Water Rating: IP67
Certification: (add)
Connector: (add)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: OMG
Stall Current: (add)
Shaft Power: 9.24–15.27 W
Weight: 3.10 oz88.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.63 in 39.9×20.1×41.4 mm
Case Material: Metal
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Stainless Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 220°
Mech. Limit: 180
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1520 µs
Dead Band: 2 µs
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: Yes
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -15–70°C5.0–158.0°F
Water Rating: IP67
Certification: (add)
Connector: (add)
Wire Length: 315 mm12.40 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Outrage
Stall Current: (add)
Shaft Power: 2.33–4.91 W
Weight: 2.15 oz61.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.571×0.791×1.52 in 39.9×20.1×38.6 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Titanium
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: 5 ms
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 200 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 5.2–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Outrage
Stall Current: (add)
Shaft Power: 2.35–5.65 W
Weight: 2.15 oz61.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.52 in 39.9×20.1×38.6 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Titanium
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: 1.79 ms
Pulse Width: (add)
Neutral Pos.: 760 µs
Dead Band: (add)
Refresh Rate: 560 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 5.2–8.4 V
Power Source: 2S LiPo
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: Rudder
Make: Outrage
Stall Current: (add)
Shaft Power: 2.61–4.54 W
Weight: 2.51 oz71.1 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.52 in 39.9×20.1×38.6 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Titanium
Gear Spline/Teeth: (add)
Rotation: Triple Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: 5 ms
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 200 Hz
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 5.2–8.4 V
Power Source: 2S LiPo
Regulator Type: Direct
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Outrage
Stall Current: (add)
Shaft Power: 2.54–4.53 W
Weight: 2.15 oz61.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.52 in 39.9×20.1×38.6 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Titanium
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 760 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 5.2–8.4 V
Power Source: 2S LiPo
Regulator Type: Direct
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: Position
Make: Oxidean Marine
Stall Current: (add)
Shaft Power: —
Weight: 2.26 oz64.0 g
Size Class: Low Profile
Diameter: —
Dimensions: 1.57×0.79×0.94 in 39.9×20.1×23.9 mm
Case Material: Aluminum
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: 3.03 ms
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: 2 µs
Refresh Rate: 330 Hz
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 5–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: Waterproof
Certification: (add)
Connector: JR (Universal)
Wire Length: 320 mm12.60 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Oxidean Marine
Stall Current: (add)
Shaft Power: —
Weight: 2.26 oz64.0 g
Size Class: Low Profile
Diameter: —
Dimensions: 1.57×0.79×0.94 in 39.9×20.1×23.9 mm
Case Material: Aluminum
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: 2 µs
Refresh Rate: 330 Hz
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 5–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: Waterproof
Certification: (add)
Connector: JR (Universal)
Wire Length: 320 mm12.60 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Perfect Pass RC
Stall Current: 4.2–5.5 A4200–5500 mA
Shaft Power: 7.93–14.82 W
Weight: 4.59 oz130.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.48 in 39.9×20.1×37.6 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: IP67
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Perfect Pass RC
Stall Current: 9.7–12.8 A9700–12800 mA
Shaft Power: 15.17–29.42 W
Weight: 7.76 oz220.0 g
Size Class: Giant
Diameter: —
Dimensions: 2.63×1.18×2.38 in 66.8×30.0×60.5 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 15
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: Waterproof
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Quick Tips
- Models with an asterisk (*) have been discontinued.
- Click on any servo model name to see more details about that product.
- Click on any brand name to filter all servos for that brand.
- In the desktop view, click on any column header to sort the table by that attribute. Click again to reverse the order.
Compare Prices for
Unable to load results. Please try again.