Discover XQ-Power Servos in Our eBay Store!
Shop NowSearch Matches (5,627)
Performance
Physical
Drivetrain
Control & Signal
Electrical & Environment
Connectivity
Origin
Preferences are saved automatically.
| Make | Model | Category | Torque | Speed | Stall Current |
Weight | Dimensions (L×W×H) |
Diameter | Size Class |
Case Material |
Motor Type |
Motor Drive |
Gear Material |
Gear Spline/ Teeth |
Rotation | Modulation | Direction | Op. Range |
Mech. Limit |
Pulse Cycle |
Pulse Width |
Neutral Pos. |
Dead Band |
Refresh Rate |
Angle Sensor |
Control System |
Programmable | Op. Voltage |
Power Source |
Regulator Type |
Temperature | Water Rating |
Certification | Connector | Wire Length |
Country of Origin |
Shaft Power |
Shape | Shaft Size |
Resolution | Gear Ratio |
Baud Rate |
Output Power |
Radial Load |
MCU | Operating Modes |
Running Current |
Rotation Mode |
Idle Current |
Backlash | Signal Voltage |
Compare | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| We may earn a commission from your purchase. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Feetech | FT6325M | Hobby |
7.4V 347.3 oz-in25.00 kg-cm2.5 N-m 6.0V 284.8 oz-in20.50 kg-cm2.0 N-m |
7.4V 0.15 s/60°397.4 deg/s66.2 RPM 6.0V 0.19 s/60°324.3 deg/s54.1 RPM |
3–3.5 A3000–3500 mA | 2.36 oz67.0 g | 2.17×0.79×1.69 in 55.0×20.0×43.0 mm | — | Standard | Nylon / Aluminum | Cored | (add) | Steel | 25 | Single Bearing | Digital | Counterclockwise | 360° | (add) | (add) | 500–2500 µs | 1500 µs | 4 µs | (add) | Magnetic Encoder | PWM | (add) | 6–8.4 V | (add) | (add) | -20–60°C-4.0–140.0°F | IP54 | RoHS | JR | 300 mm11.81 in | China | 2.85–4.25 W | — | (add) | — | — | — | — | — | — | — | 0.120 A @ 7.4V120 mA @ 7.4V | Continuous | 0.006 A6 mA | — | — | ||
| Feetech | FT6335M | Hobby |
7.4V 493.0 oz-in35.50 kg-cm3.5 N-m 6.0V 400.0 oz-in28.80 kg-cm2.8 N-m |
7.4V 0.19 s/60°312.5 deg/s52.1 RPM 6.0V 0.24 s/60°252.1 deg/s42.0 RPM |
3.2–3.9 A3200–3900 mA | 2.36 oz67.0 g | 2.17×0.79×1.69 in 55.0×20.0×43.0 mm | — | Standard | Plastic / Aluminum | Cored | (add) | Steel | 25 | Single Bearing | Digital | Counterclockwise | 360° | (add) | 20 ms | 500–2500 µs | 1500 µs | 4 µs | (add) | Magnetic Encoder | PWM | (add) | 6–7.4 V | (add) | (add) | -20–60°C-4.0–140.0°F | IP54 | RoHS | JR | 300 mm11.81 in | China | 3.11–4.75 W | — | (add) | — | — | — | — | — | — | — | 0.180 A @ 7.4V180 mA @ 7.4V | Positional | 0.006 A6 mA | 0.500° | — | ||
| Feetech | FT6365M | Hobby | 7.4V 902.7 oz-in65.00 kg-cm6.4 N-m |
7.4V 0.23 s/60°264.3 deg/s44.1 RPM 7.4V 0.23 s/60°264.3 deg/s44.1 RPM |
≤10.2 A≤10200 mA | 8.30 oz235.2 g | 2.56×1.18×2.30 in 65.0×30.0×58.4 mm | — | Giant | Aluminum | Cored | (add) | Steel | 15 | Single Bearing | Digital | (add) | 360° | (add) | (add) | 500–2500 µs | (add) | (add) | (add) | Magnetic Encoder | PWM | (add) | 4–8.4 V | (add) | (add) | -20–60°C-4.0–140.0°F | (add) | (add) | JR (Universal) | 300 mm11.81 in | China | 7.35 W | — | (add) | — | — | — | — | — | — | — | 0.300 A @ 7.4V300 mA @ 7.4V | Continuous | 0.030 A30 mA | — | — | ||
| Feetech | FT7115 | Hobby | 7.4V 270.9 oz-in19.50 kg-cm1.9 N-m |
7.4V 0.16 s/60°372.7 deg/s62.1 RPM 7.4V 0.16 s/60°372.7 deg/s62.1 RPM |
≤3.5 A≤3500 mA | 2.18 oz61.9 g | 1.58×0.79×1.58 in 40.2×20.2×40.1 mm | — | Standard | (add) | Cored | (add) | Copper | 25 | Dual Bearings | Digital | (add) | 180° | (add) | (add) | 500–2500 µs | (add) | (add) | (add) | (add) | PWM | (add) | 4–8.4 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | China | 3.11 W | — | (add) | — | — | — | — | — | — | — | 0.140 A @ 7.4V140 mA @ 7.4V | Positional | 0.006 A6 mA | — | — | ||
| Feetech | FT7125 | Hobby | 8.4V 395.9 oz-in28.51 kg-cm2.8 N-m | 7.4V 0.14 s/60°431.7 deg/s71.9 RPM | ≤3.4 A≤3400 mA | 2.28 oz64.5 g | 1.58×0.79×1.58 in 40.2×20.2×40.1 mm | — | Standard | Aluminum | Cored | (add) | Steel | 25 | Single Bearing | Digital | Counterclockwise | 180° | (add) | (add) | 500–2500 µs | 1500 µs | 4 µs | (add) | (add) | PWM | (add) | 4–8.4 V | (add) | (add) | (add) | (add) | (add) | (add) | 300 mm11.81 in | China | — | — | (add) | — | — | — | — | — | — | — | (add) | Positional | 0.006 A6 mA | — | — | ||
| Feetech | FT7135M | Hobby | 7.4V 486.1 oz-in35.00 kg-cm3.4 N-m |
7.4V 0.17 s/60°348.8 deg/s58.1 RPM 6.0V 0.25 s/60°240.0 deg/s40.0 RPM |
(add) | 2.28 oz64.5 g | 1.58×0.79×1.58 in 40.2×20.2×40.1 mm | — | Standard | Aluminum | Cored | (add) | Steel | 25 | Single Bearing | Digital | (add) | 180° | (add) | (add) | 500–2500 µs | (add) | 2 µs | (add) | (add) | PWM | (add) | 6–8.4 V | (add) | (add) | (add) | Waterproof | RoHS | (add) | (add) | China | 5.23 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | — | ||
| Feetech | FT7235 | Hobby | 8.4V 475.0 oz-in34.21 kg-cm3.4 N-m |
8.4V 0.10 s/60°612.2 deg/s102.0 RPM 8.4V 0.10 s/60°612.2 deg/s102.0 RPM |
≤3.6 A≤3600 mA | 2.28 oz64.5 g | 1.60×0.79×1.44 in 40.7×20.2×36.5 mm | — | Standard | Aluminum | Cored | (add) | Steel | 25 | Single Bearing | Digital | Counterclockwise | 180° | (add) | (add) | 500–2500 µs | 1500 µs | 4 µs | (add) | Magnetic Encoder | PWM | (add) | 4–9 V | (add) | (add) | -10–60°C14.0–140.0°F | (add) | (add) | (add) | 300 mm11.81 in | China | 8.96 W | — | (add) | — | 275.000 | — | — | — | — | — | 0.340 A @ 8.4V340 mA @ 8.4V | Positional | 0.010 A10 mA | — | — | ||
| Feetech | FT810BL | Hobby | 7.4V 138.9 oz-in10.00 kg-cm1.0 N-m | 7.4V 0.07 s/60°857.1 deg/s142.9 RPM | (add) | 2.96 oz84.0 g | 2.14×0.79×1.53 in 54.5×20.0×38.9 mm | — | Large | Metal | Brushless | (add) | Steel | 25 | Dual Bearings | Digital | (add) | 180° | (add) | (add) | 500–2500 µs | (add) | (add) | (add) | (add) | PWM | (add) | 6–7.4 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | China | 3.67 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | — | ||
| Feetech | FT815BL | Hobby | 7.4V 208.4 oz-in15.00 kg-cm1.5 N-m | 7.4V 0.10 s/60°600.0 deg/s100.0 RPM | (add) | 2.96 oz84.0 g | 2.14×0.79×1.53 in 54.5×20.0×38.9 mm | — | Large | Metal | Brushless | (add) | Steel | 25 | Dual Bearings | Digital | (add) | 180° | (add) | (add) | 500–2500 µs | (add) | (add) | (add) | (add) | PWM | (add) | 6–7.4 V | (add) | (add) | (add) | Waterproof | (add) | (add) | (add) | China | 3.85 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | — | ||
| Feetech | FT825BL | Hobby | 7.4V 347.3 oz-in25.00 kg-cm2.5 N-m | 7.4V 0.12 s/60°504.2 deg/s84.0 RPM | ≤4.2 A≤4200 mA | 2.96 oz84.0 g | 2.14×0.79×1.54 in 54.4×20.0×39.0 mm | — | Large | (add) | Brushless | (add) | Steel | 25 | Dual Bearings | Digital | (add) | 180° | (add) | (add) | 500–2500 µs | (add) | (add) | (add) | (add) | PWM | (add) | 6–7.4 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | China | 5.40 W | — | (add) | — | — | — | — | — | — | — | 0.250 A @ 7.4V250 mA @ 7.4V | Positional | (add) | — | — | ||
| Feetech | FT830BL | Hobby | 7.4V 416.7 oz-in30.01 kg-cm2.9 N-m | 7.4V 0.14 s/60°444.4 deg/s74.1 RPM | ≤4.2 A≤4200 mA | 2.98 oz84.5 g | 1.58×0.79×1.53 in 40.0×20.0×38.9 mm | — | Standard | Aluminum | Brushless | (add) | Steel | 25 | Single Bearing | Digital | Counterclockwise | 180° | (add) | (add) | 500–2500 µs | 1500 µs | 4 µs | (add) | (add) | PWM | (add) | 6–7.4 V | (add) | (add) | -20–60°C-4.0–140.0°F | (add) | (add) | (add) | 300 mm11.81 in | China | 5.71 W | — | (add) | — | — | — | — | — | — | — | 0.180 A @ 7.4V180 mA @ 7.4V | Positional | 0.006 A6 mA | — | — | ||
| Feetech | FT8346M | Hobby | 7.4V 555.6 oz-in40.01 kg-cm3.9 N-m | 7.4V 0.22 s/60°272.7 deg/s45.5 RPM | ≤3.1 A≤3100 mA | 3.23 oz91.5 g | 1.58×0.79×1.70 in 40.0×20.0×43.1 mm | — | Standard | Aluminum | Coreless | (add) | Steel | 25 | Single Bearing | Digital | Counterclockwise | 360° | (add) | (add) | 500–2500 µs | 1500 µs | 4 µs | (add) | (add) | PWM | (add) | 4–8.4 V | (add) | (add) | -20–60°C-4.0–140.0°F | (add) | (add) | (add) | 300 mm11.81 in | China | 4.67 W | — | (add) | — | — | — | — | — | — | — | 0.300 A @ 7.4V300 mA @ 7.4V | Positional | 0.006 A6 mA | — | — | ||
| Feetech | FT835BL * | Hobby |
8.4V 555.5 oz-in40.00 kg-cm3.9 N-m 7.4V 486.1 oz-in35.00 kg-cm3.4 N-m 6.0V 416.6 oz-in30.00 kg-cm2.9 N-m |
8.4V 0.13 s/60°480.0 deg/s80.0 RPM | 2.6–4.5 A2600–4500 mA | 2.72 oz77.2 g | 1.58×0.79×1.43 in 40.0×20.0×36.4 mm | — | Standard | Aluminum | Brushless | (add) | Steel | 25 | Dual Bearings | Digital | Counterclockwise | 180° | 200 | (add) | 500–2500 µs | 1500 µs | 4 µs | 330 Hz | (add) | PWM | Yes | 4–8.4 V | (add) | (add) | -15–70°C5.0–158.0°F | (add) | (add) | JR (Universal) | 300 mm11.81 in | China | 8.22 W | — | (add) | — | — | — | — | — | — | — | 0.230 A @ 8.4V230 mA @ 8.4V | Positional | 0.230 A230 mA | — | — | ||
| Feetech | FT846BL | Hobby |
7.4V 555.5 oz-in40.00 kg-cm3.9 N-m 6.0V 451.3 oz-in32.50 kg-cm3.2 N-m |
7.4V 0.15 s/60°397.4 deg/s66.2 RPM 6.0V 0.19 s/60°324.3 deg/s54.1 RPM |
3.5–4.4 A3500–4400 mA | 3.23 oz91.5 g | 1.58×0.79×1.50 in 40.0×20.0×38.0 mm | — | Standard | Aluminum | Brushless | (add) | Steel | 25 | Single Bearing | Digital | Counterclockwise | 180° | (add) | (add) | 500–2500 µs | 1500 µs | 4 µs | (add) | (add) | PWM | (add) | 4–8.4 V | (add) | (add) | -20–60°C-4.0–140.0°F | (add) | (add) | JR (Universal) | 300 mm11.81 in | China | 4.51–6.80 W | — | 5.9 mm | — | — | — | — | — | — | — | 0.300 A @ 7.4V300 mA @ 7.4V | Positional | 0.006 A6 mA | — | — | ||
| Feetech | FT850M | Hobby | 8.4V 764.0 oz-in55.01 kg-cm5.4 N-m |
8.4V 0.10 s/60°612.2 deg/s102.0 RPM 8.4V 0.10 s/60°612.2 deg/s102.0 RPM |
(add) | 2.54 oz72.0 g | 1.57×0.79×1.43 in 40.0×20.0×36.4 mm | — | Standard | (add) | Coreless | (add) | Steel | 25 | Dual Bearings | Digital | (add) | 180° | (add) | (add) | 500–2500 µs | (add) | (add) | (add) | (add) | PWM | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | China | 14.41 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | — | ||
| Feetech | FT860B | Hobby | 8.4V 972.3 oz-in70.01 kg-cm6.9 N-m |
8.4V 0.09 s/60°697.7 deg/s116.3 RPM 8.4V 0.09 s/60°697.7 deg/s116.3 RPM |
(add) | 2.96 oz84.0 g | 1.57×0.79×1.57 in 40.0×20.0×39.9 mm | — | Standard | Aluminum | Brushless | (add) | Steel | 25 | Single Bearing | Digital | (add) | 180° | (add) | (add) | 500–2500 µs | 1500 µs | 4 µs | (add) | (add) | PWM | (add) | 6–9 V | (add) | (add) | -20–60°C-4.0–140.0°F | (add) | (add) | (add) | 300 mm11.81 in | China | 20.90 W | — | (add) | — | — | — | — | — | — | — | 0.490 A @ 8.4V490 mA @ 8.4V | Positional | 0.012 A12 mA | — | — | ||
| Feetech | FT870B | Hobby | 8.4V 1,041.8 oz-in75.01 kg-cm7.4 N-m |
8.4V 0.14 s/60°422.5 deg/s70.4 RPM 8.4V 0.14 s/60°422.5 deg/s70.4 RPM |
(add) | 2.78 oz78.8 g | 1.57×0.79×1.54 in 40.0×20.0×39.0 mm | — | Standard | (add) | Brushless | (add) | Titanium | 25 | Single Bearing | Digital | (add) | 180° | (add) | (add) | 500–2500 µs | 1500 µs | 4 µs | (add) | (add) | PWM | (add) | 6–9 V | (add) | (add) | (add) | (add) | (add) | (add) | 300 mm11.81 in | China | 13.56 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | 0.026 A26 mA | — | — | ||
| Feetech | FT9025M | Hobby | 4.8V 118.1 oz-in8.50 kg-cm0.8 N-m | 4.8V 0.13 s/60°461.5 deg/s76.9 RPM | ≤1.4 A≤1400 mA | 1.24 oz35.2 g | 1.42×0.59×1.15 in 36.0×15.0×29.2 mm | — | Mini | Aluminum | Coreless | (add) | Steel | 25 | Single Bearing | Digital | Counterclockwise | 180° | (add) | (add) | 500–2500 µs | 1500 µs | 4 µs | (add) | (add) | PWM | (add) | 3–8.4 V | (add) | (add) | -20–60°C-4.0–140.0°F | (add) | (add) | (add) | 250 mm9.84 in | China | 1.68 W | — | (add) | — | — | — | — | — | — | — | 0.200 A @ 6.0V200 mA @ 6.0V | Positional | 0.006 A6 mA | — | — | ||
| Feetech | FT90B | Hobby |
6.0V 20.8 oz-in1.50 kg-cm0.1 N-m 4.8V 18.1 oz-in1.30 kg-cm0.1 N-m 3.0V 13.9 oz-in1.00 kg-cm0.1 N-m |
6.0V 0.09 s/60°666.7 deg/s111.1 RPM 4.8V 0.12 s/60°500.0 deg/s83.3 RPM 3.0V 0.16 s/60°375.0 deg/s62.5 RPM |
0.4–0.8 A400–800 mA | 0.32 oz9.0 g | 0.89×0.48×0.88 in 22.5×12.1×22.4 mm | — | Micro | Plastic | Brushed | (add) | Nylon | 21 | Bushing | Digital | Counterclockwise | 180° | 180 | (add) | 500–2500 µs | 1500 µs | 8 µs | (add) | (add) | PWM | (add) | 3–6 V | (add) | (add) | -20–70°C-4.0–158.0°F | (add) | (add) | JR | 250 mm9.84 in | China | 0.16–0.43 W | — | (add) | — | — | — | — | — | — | — | 0.120 A @ 6.0V120 mA @ 6.0V | Positional | 0.006 A6 mA | — | — | ||
| Feetech | FT90R | Hobby |
6.0V 20.8 oz-in1.50 kg-cm0.1 N-m 4.8V 18.1 oz-in1.30 kg-cm0.1 N-m 3.0V 13.9 oz-in1.00 kg-cm0.1 N-m |
4.8V 0.09 s/60°666.7 deg/s111.1 RPM | 0.8–0.9 A800–900 mA | 0.32 oz9.0 g | 0.90×0.48×1.04 in 22.9×12.1×26.5 mm | — | Micro | Plastic | Brushed | (add) | Plastic | 20 | Bushing | Digital | Counterclockwise | 360° | (add) | (add) | 900–2100 µs | 1500 µs | 20 µs | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | -10–70°C14.0–158.0°F | (add) | (add) | JR (Universal) | 250 mm9.84 in | China | 0.37 W | — | (add) | — | — | — | — | — | — | — | 0.120 A @ 6.0V120 mA @ 6.0V | Continuous | 0.006 A6 mA | — | 3.3–5V | ||
| Feetech | FT955B | Hobby | 8.4V 694.5 oz-in50.01 kg-cm4.9 N-m |
8.4V 0.12 s/60°504.2 deg/s84.0 RPM 8.4V 0.12 s/60°504.2 deg/s84.0 RPM |
(add) | 3.35 oz95.1 g | 1.72×0.88×1.57 in 43.7×22.3×39.8 mm | — | Large | (add) | Brushless | (add) | Steel | (add) | Dual Bearings | Digital | (add) | 180° | (add) | (add) | 500–2500 µs | (add) | (add) | (add) | (add) | PWM | (add) | 8.4 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | China | 10.79 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | — | ||
| Feetech | FT965B | Hobby | 8.4V 277.8 oz-in20.00 kg-cm2.0 N-m |
8.4V 0.15 s/60°402.7 deg/s67.1 RPM 8.4V 0.15 s/60°402.7 deg/s67.1 RPM |
(add) | 3.35 oz95.1 g | 1.72×0.88×1.57 in 43.7×22.3×39.8 mm | — | Large | (add) | Brushless | (add) | Steel | (add) | Dual Bearings | Digital | (add) | 180° | (add) | (add) | 500–2500 µs | (add) | (add) | (add) | (add) | PWM | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | China | 3.45 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Feetech | FT985M | Hobby |
8.4V 1,319.6 oz-in95.02 kg-cm9.3 N-m 7.4V 1,180.7 oz-in85.02 kg-cm8.3 N-m |
7.4V 0.26 s/60°228.1 deg/s38.0 RPM 7.4V 0.26 s/60°228.1 deg/s38.0 RPM |
≤9.5 A≤9500 mA | 6.91 oz195.9 g | 2.32×1.14×2.17 in 59.0×29.0×55.0 mm | — | Giant | Plastic / Aluminum | Cored | (add) | Steel | (add) | Dual Bearings | Digital | (add) | 180° | (add) | (add) | 500–2500 µs | (add) | (add) | (add) | (add) | PWM | (add) | 6–9 V | (add) | (add) | (add) | IP66 | (add) | (add) | (add) | China | 8.30 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | 0.026 A26 mA | — | — | ||
| Feetech | FT995M | Hobby |
8.4V 1,458.2 oz-in105.00 kg-cm10.3 N-m 7.4V 1,319.3 oz-in95.00 kg-cm9.3 N-m |
8.4V 0.25 s/60°240.0 deg/s40.0 RPM 7.4V 0.27 s/60°223.9 deg/s37.3 RPM |
9.5–10.5 A9500–10500 mA | 6.61 oz187.5 g | 2.56×1.18×1.89 in 65.0×30.0×48.0 mm | — | Giant | Aluminum | Cored | (add) | Steel | 15 | Dual Bearings | Digital | Counterclockwise | 180° | (add) | 20 ms | 500–2500 µs | 1500 µs | 4 µs | (add) | Potentiometer | PWM | (add) | 6–12 V | (add) | (add) | -20–60°C-4.0–140.0°F | (add) | RoHS | JR (Universal) | 300 mm11.81 in | China | 9.10–10.78 W | — | (add) | — | — | — | — | — | — | — | 0.800 A @ 8.4V800 mA @ 8.4V | Positional | 0.026 A26 mA | 0.500° | — | ||
| Feetech | FU8830 | Hobby |
7.4V 479.2 oz-in34.51 kg-cm3.4 N-m 6.0V 479.2 oz-in34.51 kg-cm3.4 N-m |
7.4V 0.08 s/60°722.9 deg/s120.5 RPM 7.4V 0.08 s/60°722.9 deg/s120.5 RPM 6.0V 0.08 s/60°750.0 deg/s125.0 RPM 6.0V 0.08 s/60°750.0 deg/s125.0 RPM |
(add) | 3.05 oz86.4 g | 1.57×0.79×1.54 in 40.0×20.0×39.0 mm | — | Standard | Aluminum | Brushless | (add) | Titanium | 25 | Single Bearing | Digital | (add) | 180° | (add) | (add) | 500–2500 µs | 1500 µs | 4 µs | (add) | (add) | PWM | (add) | 6–8.4 V | (add) | (add) | -20–60°C-4.0–140.0°F | IP66 | (add) | (add) | 300 mm11.81 in | China | 10.68–11.08 W | — | (add) | — | 241.000 | — | — | — | — | — | 0.420 A @ 7.4V420 mA @ 7.4V | (add) | 0.055 A55 mA | — | — | ||
Make: Feetech
Stall Current: 3–3.5 A3000–3500 mA
Shaft Power: 2.85–4.25 W
Weight: 2.36 oz67.0 g
Size Class: Standard
Diameter: —
Dimensions: 2.17×0.79×1.69 in 55.0×20.0×43.0 mm
Case Material: Nylon / Aluminum
Motor Type: Cored
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Single Bearing
Modulation: Digital
Direction: Counterclockwise
Op. Range: 360°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 4 µs
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: IP54
Certification: RoHS
Connector: JR
Wire Length: 300 mm11.81 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: 3.2–3.9 A3200–3900 mA
Shaft Power: 3.11–4.75 W
Weight: 2.36 oz67.0 g
Size Class: Standard
Diameter: —
Dimensions: 2.17×0.79×1.69 in 55.0×20.0×43.0 mm
Case Material: Plastic / Aluminum
Motor Type: Cored
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Single Bearing
Modulation: Digital
Direction: Counterclockwise
Op. Range: 360°
Mech. Limit: (add)
Pulse Cycle: 20 ms
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 4 µs
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: (add)
Op. Voltage: 6–7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: IP54
Certification: RoHS
Connector: JR
Wire Length: 300 mm11.81 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: ≤10.2 A≤10200 mA
Shaft Power: 7.35 W
Weight: 8.30 oz235.2 g
Size Class: Giant
Diameter: —
Dimensions: 2.56×1.18×2.30 in 65.0×30.0×58.4 mm
Case Material: Aluminum
Motor Type: Cored
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 15
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: 360°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: (add)
Op. Voltage: 4–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: ≤3.5 A≤3500 mA
Shaft Power: 3.11 W
Weight: 2.18 oz61.9 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.79×1.58 in 40.2×20.2×40.1 mm
Case Material: (add)
Motor Type: Cored
Motor Drive: (add)
Gear Material: Copper
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: ≤3.4 A≤3400 mA
Shaft Power: —
Weight: 2.28 oz64.5 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.79×1.58 in 40.2×20.2×40.1 mm
Case Material: Aluminum
Motor Type: Cored
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Single Bearing
Modulation: Digital
Direction: Counterclockwise
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 4 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: 300 mm11.81 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: (add)
Shaft Power: 5.23 W
Weight: 2.28 oz64.5 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.79×1.58 in 40.2×20.2×40.1 mm
Case Material: Aluminum
Motor Type: Cored
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: (add)
Dead Band: 2 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: Waterproof
Certification: RoHS
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: ≤3.6 A≤3600 mA
Shaft Power: 8.96 W
Weight: 2.28 oz64.5 g
Size Class: Standard
Diameter: —
Dimensions: 1.60×0.79×1.44 in 40.7×20.2×36.5 mm
Case Material: Aluminum
Motor Type: Cored
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Single Bearing
Modulation: Digital
Direction: Counterclockwise
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 4 µs
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: (add)
Op. Voltage: 4–9 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–60°C14.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: 300 mm11.81 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: 275.000
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: (add)
Shaft Power: 3.67 W
Weight: 2.96 oz84.0 g
Size Class: Large
Diameter: —
Dimensions: 2.14×0.79×1.53 in 54.5×20.0×38.9 mm
Case Material: Metal
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6–7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: (add)
Shaft Power: 3.85 W
Weight: 2.96 oz84.0 g
Size Class: Large
Diameter: —
Dimensions: 2.14×0.79×1.53 in 54.5×20.0×38.9 mm
Case Material: Metal
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6–7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: Waterproof
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: ≤4.2 A≤4200 mA
Shaft Power: 5.40 W
Weight: 2.96 oz84.0 g
Size Class: Large
Diameter: —
Dimensions: 2.14×0.79×1.54 in 54.4×20.0×39.0 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6–7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: ≤4.2 A≤4200 mA
Shaft Power: 5.71 W
Weight: 2.98 oz84.5 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.79×1.53 in 40.0×20.0×38.9 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Single Bearing
Modulation: Digital
Direction: Counterclockwise
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 4 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6–7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: 300 mm11.81 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: ≤3.1 A≤3100 mA
Shaft Power: 4.67 W
Weight: 3.23 oz91.5 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.79×1.70 in 40.0×20.0×43.1 mm
Case Material: Aluminum
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Single Bearing
Modulation: Digital
Direction: Counterclockwise
Op. Range: 360°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 4 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: 300 mm11.81 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: 2.6–4.5 A2600–4500 mA
Shaft Power: 8.22 W
Weight: 2.72 oz77.2 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.79×1.43 in 40.0×20.0×36.4 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: Counterclockwise
Op. Range: 180°
Mech. Limit: 200
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 4 µs
Refresh Rate: 330 Hz
Angle Sensor: (add)
Control System: PWM
Programmable: Yes
Op. Voltage: 4–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -15–70°C5.0–158.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: 3.5–4.4 A3500–4400 mA
Shaft Power: 4.51–6.80 W
Weight: 3.23 oz91.5 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.79×1.50 in 40.0×20.0×38.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Single Bearing
Modulation: Digital
Direction: Counterclockwise
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 4 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: China
Shape: —
Shaft Size: 5.9 mm
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: (add)
Shaft Power: 14.41 W
Weight: 2.54 oz72.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.43 in 40.0×20.0×36.4 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: (add)
Shaft Power: 20.90 W
Weight: 2.96 oz84.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.57 in 40.0×20.0×39.9 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 4 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6–9 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: 300 mm11.81 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: (add)
Shaft Power: 13.56 W
Weight: 2.78 oz78.8 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.54 in 40.0×20.0×39.0 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Titanium
Gear Spline/Teeth: 25
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 4 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6–9 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: 300 mm11.81 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: ≤1.4 A≤1400 mA
Shaft Power: 1.68 W
Weight: 1.24 oz35.2 g
Size Class: Mini
Diameter: —
Dimensions: 1.42×0.59×1.15 in 36.0×15.0×29.2 mm
Case Material: Aluminum
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Single Bearing
Modulation: Digital
Direction: Counterclockwise
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 4 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 3–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: 250 mm9.84 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: 0.4–0.8 A400–800 mA
Shaft Power: 0.16–0.43 W
Weight: 0.32 oz9.0 g
Size Class: Micro
Diameter: —
Dimensions: 0.89×0.48×0.88 in 22.5×12.1×22.4 mm
Case Material: Plastic
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Nylon
Gear Spline/Teeth: 21
Rotation: Bushing
Modulation: Digital
Direction: Counterclockwise
Op. Range: 180°
Mech. Limit: 180
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 8 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 3–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–70°C-4.0–158.0°F
Water Rating: (add)
Certification: (add)
Connector: JR
Wire Length: 250 mm9.84 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: 0.8–0.9 A800–900 mA
Shaft Power: 0.37 W
Weight: 0.32 oz9.0 g
Size Class: Micro
Diameter: —
Dimensions: 0.90×0.48×1.04 in 22.9×12.1×26.5 mm
Case Material: Plastic
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 20
Rotation: Bushing
Modulation: Digital
Direction: Counterclockwise
Op. Range: 360°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 900–2100 µs
Neutral Pos.: 1500 µs
Dead Band: 20 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–70°C14.0–158.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 250 mm9.84 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: (add)
Shaft Power: 10.79 W
Weight: 3.35 oz95.1 g
Size Class: Large
Diameter: —
Dimensions: 1.72×0.88×1.57 in 43.7×22.3×39.8 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: (add)
Shaft Power: 3.45 W
Weight: 3.35 oz95.1 g
Size Class: Large
Diameter: —
Dimensions: 1.72×0.88×1.57 in 43.7×22.3×39.8 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: ≤9.5 A≤9500 mA
Shaft Power: 8.30 W
Weight: 6.91 oz195.9 g
Size Class: Giant
Diameter: —
Dimensions: 2.32×1.14×2.17 in 59.0×29.0×55.0 mm
Case Material: Plastic / Aluminum
Motor Type: Cored
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6–9 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: IP66
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: 9.5–10.5 A9500–10500 mA
Shaft Power: 9.10–10.78 W
Weight: 6.61 oz187.5 g
Size Class: Giant
Diameter: —
Dimensions: 2.56×1.18×1.89 in 65.0×30.0×48.0 mm
Case Material: Aluminum
Motor Type: Cored
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 15
Rotation: Dual Bearings
Modulation: Digital
Direction: Counterclockwise
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: 20 ms
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 4 µs
Refresh Rate: (add)
Angle Sensor: Potentiometer
Control System: PWM
Programmable: (add)
Op. Voltage: 6–12 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: (add)
Certification: RoHS
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: (add)
Shaft Power: 10.68–11.08 W
Weight: 3.05 oz86.4 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.54 in 40.0×20.0×39.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Titanium
Gear Spline/Teeth: 25
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 4 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: IP66
Certification: (add)
Connector: (add)
Wire Length: 300 mm11.81 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: 241.000
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Quick Tips
- Models with an asterisk (*) have been discontinued.
- Click on any servo model name to see more details about that product.
- Click on any brand name to filter all servos for that brand.
- In the desktop view, click on any column header to sort the table by that attribute. Click again to reverse the order.
Compare Prices for
Unable to load results. Please try again.