Discover XQ-Power Servos in Our eBay Store!
Shop Now
Technical Specifications
Last Updated: 2026-10-23
Weight
Dimensions
Torque
Speed
Current
Temp
Wire
| Identity | |
| Brand |  |
| Product Number | FT6335M |
| Category | Hobby |
| Performance | |
| Torque |
7.4V
493.00 oz-in
35.50 kg-cm
3.5 N-m
6.0V
399.96 oz-in
28.80 kg-cm
2.8 N-m
Above Average
|
| Speed |
7.4V
0.19 sec/60°
312.5 deg/s
52.1 RPM
6.0V
0.24 sec/60°
252.1 deg/s
42.0 RPM
Bottom 10%
|
| Running Current |
7.4V
0.180 A
180 mA
6.0V
0.150 A
150 mA
Above Average
|
| Stall Current | 3.2–3.9 A3200–3900 mAAverage |
| Physical | |
| Weight | 2.36 oz67.0 gAverage |
| Dimensions |
L 2.165 in W 0.787 in H 1.693 in L 55.0 mm W 20.0 mm H 43.0 mm |
| Case Material | Plastic / Aluminum |
| Drivetrain | |
| Motor Type | Cored |
| Gears | Steel |
| Gear Spline/Teeth | 25 T estimate |
| Rotation Mode | Positional |
| Rotation/Support | Single Bearing |
| Backlash | 0.500° |
| Control & Signal | |
| Modulation | Digital |
| Direction | Counterclockwise |
| Rotational Range | 360° |
| Pulse Cycle | 20 ms |
| Pulse Width | 500-2500 µs |
| Neutral Position | 1500 µs |
| Dead Band | 4 µs |
| Angle Sensor | Magnetic Encoder |
| Control System | PWM |
| Electrical & Environment | |
| Operating Voltage | 6–7.4 V |
| Temperature | -20–60 °C-4–140 °F |
| Water Rating | IP54 |
| Certification | RoHS |
| Idle Current | 0.006 A6 mA |
| Connectivity | |
| Connector | JR |
| Wire Length | 300 mm11.81 in |
| Origin | |
| Country of Origin | China |
Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.
Class Comparison
| Torque | Above Average Stronger than 83% of 1060 Digital Standard servos at 6.0V |
| Speed | Bottom 10% Faster than 3% of 1045 Digital Standard servos at 6.0V |
| Weight | Average Lighter than 40% of 1880 Digital Standard servos |
| Running Current | Above Average Lower draw than 68% of 226 Digital Standard servos at 6.0V |
| Stall Current | Average Lower draw than 39% of 570 Digital Standard servos |
Performance Analysis
| Shaft Power | 3.11–4.75 W |
| Power Density | 1.646 W/in³ More power-dense than 35% of 1768 Digital Standard servos |
| Torque Density | 5.9696 oz-in/g Stronger than 88% of 1053 Digital Standard servos |
| Torque-to-Volume Ratio | 138.65 oz-in/in³ Denser torque than 61% of 1058 Digital Standard servos |
| Speed-to-Weight | 0.06271 (1/sec·g) Faster than 3% of 1038 Digital Standard servos |
| Speed-Torque Trade-off | 95.19 Better balanced than 96% of 1034 Digital Standard servos |
| Current-per-Torque Ratio | 0.0098 A/oz-in More efficient than 82% of 331 Digital Standard servos |
| Idle-to-Running Current Ratio | 0.040 Lower idle draw than 66% of 167 Digital Standard servos |
| No-Load vs Stall Current Spread | 26.00 Narrower current spread than 38% of 179 Digital Standard servos |
| Torque Gain per Volt | 16.62%/V More voltage-responsive (torque) than 57% of 873 Digital Standard servos |
| Speed Gain per Volt | 17.11%/V More voltage-responsive (speed) than 60% of 874 Digital Standard servos |
| Voltage Range Width | 1.4 V Wider voltage range than 30% of 1560 Digital Standard servos |
| Backlash-to-Range Ratio | 0.00139 Tighter backlash than 84% of 52 Digital Standard servos |
| Dead-Band-to-Pulse-Width Ratio | 0.0020 Finer dead band than 27% of 504 Digital Standard servos |
Similar Active Servos
Reviews (1)
Includes 1 review aggregated from around the web.
There are very few reviews for this servo on the web. An Arduino forum user reports being unable to get the servo to rotate continuously, even running with no load from a 5V supply.
Be the first to review!