Discover XQ-Power Servos in Our eBay Store!
Shop NowSearch Matches (5,627)
Performance
Physical
Drivetrain
Control & Signal
Electrical & Environment
Connectivity
Origin
Preferences are saved automatically.
| Make | Model | Category | Torque | Speed | Stall Current |
Weight | Dimensions (L×W×H) |
Diameter | Size Class |
Case Material |
Motor Type |
Motor Drive |
Gear Material |
Gear Spline/ Teeth |
Rotation | Modulation | Direction | Op. Range |
Mech. Limit |
Pulse Cycle |
Pulse Width |
Neutral Pos. |
Dead Band |
Refresh Rate |
Angle Sensor |
Control System |
Programmable | Op. Voltage |
Power Source |
Regulator Type |
Temperature | Water Rating |
Certification | Connector | Wire Length |
Country of Origin |
Shaft Power |
Shape | Shaft Size |
Resolution | Gear Ratio |
Baud Rate |
Output Power |
Radial Load |
MCU | Operating Modes |
Running Current |
Rotation Mode |
Idle Current |
Backlash | Signal Voltage |
Compare | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| We may earn a commission from your purchase. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| FeeTech | FT2312M * | Hobby |
6.0V 20.9 oz-in1.50 kg-cm0.1 N-m 4.8V 16.7 oz-in1.20 kg-cm0.1 N-m |
6.0V 0.10 s/60°600.0 deg/s100.0 RPM 4.8V 0.12 s/60°500.0 deg/s83.3 RPM |
(add) | 0.49 oz14.0 g | 0.91×0.48×1.01 in 23.2×12.3×25.6 mm | — | Micro | (add) | Brushed | (add) | Metal | (add) | Single Bearing | Digital | Clockwise | 120° | (add) | (add) | 900–2100 µs | (add) | (add) | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | -20–60°C-4.0–140.0°F | (add) | (add) | JR (Universal) | 200 mm7.87 in | China | 0.26–0.39 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| FeeTech | FT2331M | Hobby |
6.0V 48.7 oz-in3.51 kg-cm0.3 N-m 4.8V 41.7 oz-in3.00 kg-cm0.3 N-m |
6.0V 0.07 s/60°857.1 deg/s142.9 RPM 4.8V 0.09 s/60°666.7 deg/s111.1 RPM |
0.9–1 A900–1000 mA | 0.71 oz20.0 g | 0.91×0.47×1.00 in 23.0×12.0×25.5 mm | — | Micro | Aluminum | Coreless | (add) | Steel | 25 | Dual Bearings | Digital | Counterclockwise | 120° | 360 | (add) | 900–2100 µs | 1500 µs | 2 µs | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | -15–70°C5.0–158.0°F | (add) | (add) | JR (Universal) | 150 mm5.91 in | China | 0.86–1.29 W | — | (add) | — | — | — | — | — | — | — | 0.150 A @ 6.0V150 mA @ 6.0V | Positional | 0.006 A6 mA | — | — | ||
| FeeTech | FT4311M * | Hobby |
6.0V 32.0 oz-in2.30 kg-cm0.2 N-m 4.8V 29.2 oz-in2.10 kg-cm0.2 N-m |
6.0V 0.05 s/60°1,200.0 deg/s200.0 RPM 4.8V 0.08 s/60°750.0 deg/s125.0 RPM |
(add) | 1.02 oz29.0 g | 1.39×0.60×1.16 in 35.2×15.2×29.5 mm | — | Mini | (add) | Brushed | (add) | Metal | (add) | Dual Bearings | Digital | (add) | 120° | (add) | (add) | 900–2100 µs | (add) | (add) | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | China | 0.67–1.18 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | — | ||
| FeeTech | FT4321M * | Hobby |
6.0V 502.7 oz-in36.20 kg-cm3.5 N-m 4.8V 425.0 oz-in30.60 kg-cm3.0 N-m |
6.0V 0.09 s/60°666.7 deg/s111.1 RPM 4.8V 0.11 s/60°545.5 deg/s90.9 RPM |
(add) | 1.02 oz29.0 g | 1.39×0.60×1.16 in 35.2×15.2×29.5 mm | — | Mini | (add) | Coreless | (add) | Metal | (add) | Dual Bearings | Digital | (add) | 120° | (add) | (add) | 900–2100 µs | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 7.14–10.33 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Feetech | FT5118M | Hobby | 6.0V 243.1 oz-in17.50 kg-cm1.7 N-m | 6.0V 0.17 s/60°359.3 deg/s59.9 RPM | 1.7–2.1 A1700–2100 mA | 2.29 oz65.0 g | 1.58×0.79×1.53 in 40.1×20.1×38.9 mm | — | Standard | (add) | Cored | (add) | Steel | 25 | Dual Bearings | Digital | Counterclockwise | 280° | (add) | 20 ms | 500–2500 µs | (add) | 4 µs | 50 Hz | (add) | PWM | (add) | 6–6 V | (add) | (add) | -15–70°C5.0–158.0°F | (add) | (add) | JR (Universal) | 300 mm11.81 in | China | 2.69 W | — | (add) | — | — | — | — | — | — | — | 0.150 A @ 7.4V150 mA @ 7.4V | Positional | 0.006 A6 mA | — | — | ||
| Feetech | FT5320M | Hobby |
7.4V 277.8 oz-in20.00 kg-cm2.0 N-m 6.0V 229.1 oz-in16.50 kg-cm1.6 N-m |
7.4V 0.15 s/60°397.4 deg/s66.2 RPM 6.0V 0.19 s/60°324.3 deg/s54.1 RPM |
2.3–3 A2300–3000 mA | 2.36 oz67.0 g | 2.17×0.79×1.69 in 55.0×20.0×43.0 mm | — | Standard | Plastic / Aluminum | Cored | (add) | Copper | 25 | Single Bearing | Digital | Counterclockwise | 180° | (add) | 20 ms | 500–2500 µs | 1500 µs | 4 µs | 50 Hz | Potentiometer | PWM | (add) | 6–7.4 V | (add) | (add) | -20–60°C-4.0–140.0°F | IP54 | RoHS | JR (Universal) | 300 mm11.81 in | China | 2.29–3.40 W | — | (add) | — | — | — | — | — | — | — | 0.120 A @ 7.4V120 mA @ 7.4V | Positional | 0.006 A6 mA | 0.500° | — | ||
| Feetech | FT5325M | Hobby |
7.4V 347.8 oz-in25.04 kg-cm2.5 N-m 6.0V 285.2 oz-in20.54 kg-cm2.0 N-m |
7.4V 0.15 s/60°397.4 deg/s66.2 RPM 6.0V 0.19 s/60°324.3 deg/s54.1 RPM |
3–3.5 A3000–3500 mA | 2.36 oz67.0 g | 2.17×0.79×1.69 in 55.0×20.0×43.0 mm | — | Standard | Plastic / Aluminum | Cored | (add) | Steel | 25 | Single Bearing | Digital | Counterclockwise | 180° | (add) | 20 ms | 500–2500 µs | 1500 µs | 4 µs | 50 Hz | Potentiometer | PWM | (add) | 6–7.4 V | (add) | (add) | -20–60°C-4.0–140.0°F | IP54 | (add) | JR | 300 mm11.81 in | China | 2.85–4.26 W | — | (add) | — | — | — | — | — | — | — | 0.120 A @ 7.4V120 mA @ 7.4V | Positional | 0.006 A6 mA | — | — | ||
| Feetech | FT5330M | Hobby | 7.4V 493.1 oz-in35.51 kg-cm3.5 N-m |
7.4V 0.19 s/60°315.8 deg/s52.6 RPM 7.4V 0.19 s/60°315.8 deg/s52.6 RPM |
3.2–3.9 A3200–3900 mA | 2.36 oz67.0 g | 2.17×0.79×1.69 in 55.0×20.0×43.0 mm | — | Large | Plastic / Aluminum | Cored | (add) | Steel | 25 | Dual Bearings | Digital | Counterclockwise | 180° | (add) | 20 ms | 500–2500 µs | 1500 µs | 4 µs | 50 Hz | Potentiometer | PWM | (add) | 4–8.4 V | (add) | (add) | -20–60°C-4.0–140.0°F | IP54 | (add) | JR (Universal) | 300 mm11.81 in | China | 4.80 W | — | 5.9 mm | — | — | — | — | — | — | Position | 0.180 A @ 7.4V180 mA @ 7.4V | Positional | 0.006 A6 mA | 0.500° | — | ||
| Feetech | FT5420M | Hobby |
8.4V 312.5 oz-in22.50 kg-cm2.2 N-m 7.4V 277.8 oz-in20.00 kg-cm2.0 N-m 6.0V 229.1 oz-in16.50 kg-cm1.6 N-m |
8.4V 0.10 s/60°631.6 deg/s105.3 RPM 7.4V 0.10 s/60°600.0 deg/s100.0 RPM 6.0V 0.13 s/60°461.5 deg/s76.9 RPM |
≤2.95 A≤2950 mA | 2.14 oz60.6 g | 1.60×0.79×1.05 in 40.6×20.0×26.6 mm | — | Low Profile | Aluminum | Coreless | (add) | Steel | 25 | Dual Bearings | Digital | Counterclockwise | 180° | (add) | (add) | 500–2500 µs | 1500 µs | 4 µs | (add) | (add) | PWM | (add) | 4–12 V | (add) | (add) | -20–60°C-4.0–140.0°F | (add) | (add) | JR (Universal) | 300 mm11.81 in | China | 3.26–6.08 W | — | (add) | — | — | — | — | — | — | — | 0.380 A @ 8.4V380 mA @ 8.4V | Positional | 0.006 A6 mA | — | — | ||
| Feetech | FT5425BL | Hobby | 8.4V 395.9 oz-in28.51 kg-cm2.8 N-m | 8.4V 0.08 s/60°750.0 deg/s125.0 RPM | (add) | 2.38 oz67.6 g | 1.60×0.79×1.18 in 40.6×20.0×30.0 mm | — | Standard | (add) | Brushless | (add) | Steel | (add) | Dual Bearings | Digital | (add) | 180° | (add) | (add) | 500–2500 µs | (add) | (add) | (add) | (add) | (add) | (add) | 6–8.4 V | (add) | (add) | (add) | (add) | CE | ROHS | (add) | (add) | China | 9.15 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | — | ||
| Feetech | FT5478M | Hobby | 8.4V 312.5 oz-in22.50 kg-cm2.2 N-m |
8.4V 0.11 s/60°571.4 deg/s95.2 RPM 8.4V 0.11 s/60°571.4 deg/s95.2 RPM |
(add) | 1.47 oz41.6 g | 1.60×0.79×1.14 in 40.6×20.0×29.0 mm | — | Low Profile | (add) | Cored | (add) | Titanium | 25 | Dual Bearings | Digital | (add) | 180° | (add) | (add) | 500–2500 µs | (add) | (add) | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 300 mm11.81 in | China | 5.50 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| FeeTech | FT5478M * | Hobby |
7.4V 277.7 oz-in20.00 kg-cm2.0 N-m 6.0V 125.2 oz-in9.02 kg-cm0.9 N-m 4.8V 104.3 oz-in7.51 kg-cm0.7 N-m |
6.0V 0.09 s/60°666.7 deg/s111.1 RPM 4.8V 0.12 s/60°500.0 deg/s83.3 RPM |
(add) | 1.80 oz51.0 g | 1.58×0.79×1.12 in 40.1×20.0×28.5 mm | — | Low Profile | (add) | Coreless | (add) | Titanium | (add) | Dual Bearings | Digital | (add) | 180° | (add) | (add) | 900–2100 µs | (add) | (add) | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 300 mm11.81 in | China | 1.61–2.57 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| FeeTech | FT5513M * | Hobby |
6.0V 173.6 oz-in12.50 kg-cm1.2 N-m 4.8V 146.7 oz-in10.56 kg-cm1.0 N-m |
6.0V 0.12 s/60°500.0 deg/s83.3 RPM 4.8V 0.14 s/60°428.6 deg/s71.4 RPM |
(add) | 1.98 oz56.0 g | 1.61×0.79×1.50 in 40.8×20.1×38.0 mm | — | Standard | (add) | Brushed | (add) | Metal | (add) | Dual Bearings | Digital | (add) | 120° | (add) | (add) | 900–2100 µs | (add) | (add) | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 300 mm11.81 in | China | 1.94–2.67 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| FeeTech | FT5515M * | Hobby |
6.0V 215.3 oz-in15.50 kg-cm1.5 N-m 4.8V 186.4 oz-in13.42 kg-cm1.3 N-m |
6.0V 0.14 s/60°428.6 deg/s71.4 RPM 4.8V 0.16 s/60°375.0 deg/s62.5 RPM |
(add) | 1.98 oz56.0 g | 1.58×0.79×1.52 in 40.1×20.0×38.6 mm | — | Standard | (add) | Brushed | (add) | Metal | (add) | Dual Bearings | Digital | (add) | 120° | (add) | (add) | 900–2100 µs | (add) | (add) | (add) | (add) | PWM | Yes | 4.8–6 V | (add) | (add) | -15–70°C5.0–158.0°F | (add) | (add) | JR (Universal) | 300 mm11.81 in | China | 2.15–2.84 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | — | ||
| FeeTech | FT5519M * | Hobby |
6.0V 257.4 oz-in18.53 kg-cm1.8 N-m 4.8V 218.4 oz-in15.73 kg-cm1.5 N-m |
6.0V 0.15 s/60°400.0 deg/s66.7 RPM 4.8V 0.18 s/60°333.3 deg/s55.6 RPM |
≤1.9 A≤1900 mA | 1.98 oz56.0 g | 2.13×0.79×1.85 in 54.0×20.0×47.0 mm | — | Standard | Plastic / Aluminum | Brushed | (add) | Titanium | (add) | Dual Bearings | Digital | (add) | 180° | (add) | (add) | 900–2100 µs | (add) | (add) | (add) | (add) | PWM | (add) | 4.8–7.2 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 300 mm11.81 in | China | 2.24–3.17 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | — | ||
| FeeTech | FT5614M * | Hobby |
8.4V 201.4 oz-in14.50 kg-cm1.4 N-m 7.4V 168.0 oz-in12.10 kg-cm1.2 N-m |
8.4V 0.11 s/60°545.5 deg/s90.9 RPM 7.4V 0.13 s/60°461.5 deg/s76.9 RPM |
(add) | 1.98 oz56.0 g | 1.58×0.79×1.52 in 40.2×20.0×38.6 mm | — | Standard | (add) | Coreless | (add) | Metal | (add) | Dual Bearings | Digital | (add) | 180° | (add) | (add) | 500–2500 µs | (add) | (add) | (add) | (add) | PWM | (add) | 4.8–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 300 mm11.81 in | China | 2.39–3.39 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| FeeTech | FT5617M * | Hobby |
8.4V 234.7 oz-in16.90 kg-cm1.7 N-m 7.4V 205.5 oz-in14.80 kg-cm1.5 N-m |
8.4V 0.12 s/60°500.0 deg/s83.3 RPM 7.4V 0.14 s/60°428.6 deg/s71.4 RPM |
(add) | 1.98 oz56.0 g | 1.58×0.79×1.52 in 40.2×20.0×38.6 mm | — | Standard | (add) | Coreless | (add) | Metal | (add) | Dual Bearings | Digital | (add) | 180° | (add) | (add) | 500–2500 µs | (add) | (add) | (add) | (add) | PWM | (add) | 4.8–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 300 mm11.81 in | China | 2.71–3.62 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| FeeTech | FT5621M * | Hobby |
8.4V 291.7 oz-in21.00 kg-cm2.1 N-m 7.4V 247.2 oz-in17.80 kg-cm1.7 N-m |
8.4V 0.14 s/60°428.6 deg/s71.4 RPM 7.4V 0.16 s/60°375.0 deg/s62.5 RPM |
(add) | 1.98 oz56.0 g | 1.58×0.79×1.52 in 40.2×20.0×38.6 mm | — | Standard | (add) | Coreless | (add) | Metal | (add) | Dual Bearings | Digital | (add) | 180° | (add) | (add) | 500–2500 µs | (add) | (add) | (add) | (add) | PWM | (add) | 4.8–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 300 mm11.81 in | China | 2.86–3.85 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | — | ||
| FeeTech | FT5679M * | Hobby |
8.4V 395.8 oz-in28.50 kg-cm2.8 N-m 7.4V 347.2 oz-in25.00 kg-cm2.5 N-m 6.0V 277.7 oz-in20.00 kg-cm2.0 N-m |
8.4V 0.10 s/60°612.2 deg/s102.0 RPM 7.4V 0.11 s/60°540.5 deg/s90.1 RPM 6.0V 0.14 s/60°434.8 deg/s72.5 RPM |
2.6–3.6 A2600–3600 mA | 1.54 oz43.6 g | 1.60×0.79×1.05 in 40.6×20.0×26.6 mm | — | Low Profile | Nylon / Fiberglass | Coreless | (add) | Metal | 25 | Dual Bearings | Digital | Counterclockwise | 180° | (add) | 20 ms | 500–2500 µs | 1500 µs | 2 µs | 50 Hz | Potentiometer | PWM | (add) | 5–9 V | (add) | (add) | -20–60°C-4.0–140.0°F | IP66 | RoHS | JR (Universal) | 140 mm5.51 in | China | 3.72–7.47 W | — | (add) | — | — | — | — | — | — | — | 0.440 A @ 8.4V440 mA @ 8.4V | Positional | 0.020 A20 mA | 0.500° | — | ||
| Feetech | FT5679M | Hobby | 8.4V 358.4 oz-in25.80 kg-cm2.5 N-m |
8.4V 0.10 s/60°612.2 deg/s102.0 RPM 7.4V 0.11 s/60°540.5 deg/s90.1 RPM 6.0V 0.14 s/60°434.8 deg/s72.5 RPM |
2.6–3.6 A2600–3600 mA | 1.54 oz43.6 g | 1.60×0.79×1.05 in 40.6×20.0×26.6 mm | — | Low Profile | Plastic | Coreless | (add) | Metal | 25 | Dual Bearings | Digital | (add) | 360° | (add) | (add) | 500–2500 µs | (add) | 2 µs | (add) | (add) | PWM | (add) | 5–9 V | (add) | (add) | (add) | Waterproof | (add) | JR (Universal) | 300 mm11.81 in | China | 6.76 W | — | (add) | — | — | — | — | — | — | — | 0.440 A @ 8.4V440 mA @ 8.4V | Positional | 0.020 A20 mA | — | — | ||
| Feetech | FT5825M | Hobby | 7.4V 347.3 oz-in25.00 kg-cm2.5 N-m |
7.4V 0.15 s/60°397.4 deg/s66.2 RPM 7.4V 0.15 s/60°397.4 deg/s66.2 RPM |
≤3.5 A≤3500 mA | 2.61 oz74.0 g | 1.58×0.79×1.69 in 40.0×20.0×43.0 mm | — | Standard | Plastic / Aluminum | Cored | (add) | Steel | 25 | Dual Bearings | Digital | Counterclockwise | 180° | (add) | (add) | 500–2500 µs | 1500 µs | 4 µs | (add) | (add) | PWM | (add) | 4.8–8.4 V | (add) | (add) | -20–60°C-4.0–140.0°F | (add) | (add) | (add) | 300 mm11.81 in | China | 4.25 W | — | (add) | — | — | — | — | — | — | — | 0.250 A @ 7.4V250 mA @ 7.4V | Positional | 0.006 A6 mA | — | — | ||
| Feetech | FT5830M | Hobby | 7.4V 423.7 oz-in30.51 kg-cm3.0 N-m |
7.4V 0.19 s/60°312.5 deg/s52.1 RPM 7.4V 0.19 s/60°312.5 deg/s52.1 RPM |
≤3.5 A≤3500 mA | 2.61 oz74.0 g | 1.58×0.79×1.69 in 40.0×20.0×43.0 mm | — | Standard | Metal / Plastic | Cored | (add) | Steel | 25 | Dual Bearings | Digital | Counterclockwise | 180° | (add) | (add) | 500–2500 µs | 1500 µs | 4 µs | (add) | (add) | PWM | (add) | 4.8–7.4 V | (add) | (add) | (add) | (add) | (add) | (add) | 300 mm11.81 in | China | 4.08 W | — | (add) | — | — | — | — | — | — | — | 0.250 A @ 7.4V250 mA @ 7.4V | Positional | 0.006 A6 mA | — | — | ||
| Feetech | FT5835M | Hobby | 7.4V 423.7 oz-in30.51 kg-cm3.0 N-m |
7.4V 0.19 s/60°312.5 deg/s52.1 RPM 7.4V 0.19 s/60°312.5 deg/s52.1 RPM |
≤3.9 A≤3900 mA | 2.61 oz74.0 g | 1.58×0.79×1.69 in 40.0×20.0×43.0 mm | — | Standard | Plastic / Aluminum | Cored | (add) | Steel | 25 | Single Bearing | Digital | Counterclockwise | 180° | (add) | (add) | 500–2500 µs | 1500 µs | 4 µs | (add) | Magnetic Encoder | PWM | (add) | 4–8.4 V | External | (add) | -20–60°C-4.0–140.0°F | IP54 | (add) | JR (Universal) | 300 mm11.81 in | China | 4.08 W | — | (add) | — | — | — | — | — | — | — | 0.290 A @ 7.4V290 mA @ 7.4V | Positional | 0.006 A6 mA | — | — | ||
| Feetech | FT5910 | Hobby | 7.4V 111.1 oz-in8.00 kg-cm0.8 N-m |
7.4V 0.10 s/60°600.0 deg/s100.0 RPM 7.4V 0.10 s/60°600.0 deg/s100.0 RPM |
(add) | 1.46 oz41.5 g | 1.58×0.79×1.48 in 40.1×20.1×37.5 mm | — | Standard | Plastic | Cored | (add) | Metal | 25 | Dual Bearings | Digital | (add) | 180° | (add) | (add) | 500–2500 µs | (add) | (add) | (add) | (add) | PWM | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | China | 2.05 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Feetech | FT5930M | Hobby | 8.4V 548.7 oz-in39.51 kg-cm3.9 N-m |
8.4V 0.10 s/60°600.0 deg/s100.0 RPM 8.4V 0.10 s/60°600.0 deg/s100.0 RPM |
≤4.5 A≤4500 mA | 2.15 oz61.0 g | 1.58×0.79×1.53 in 40.1×20.1×38.9 mm | — | Standard | (add) | Coreless | (add) | Steel | 25 | Single Bearing | Digital | (add) | 180° | (add) | (add) | 500–2500 µs | 1500 µs | 4 µs | (add) | (add) | PWM | (add) | 5–9 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 300 mm11.81 in | China | 10.14 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | 0.020 A20 mA | — | — | ||
Make: FeeTech
Stall Current: (add)
Shaft Power: 0.26–0.39 W
Weight: 0.49 oz14.0 g
Size Class: Micro
Diameter: —
Dimensions: 0.91×0.48×1.01 in 23.2×12.3×25.6 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Single Bearing
Modulation: Digital
Direction: Clockwise
Op. Range: 120°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 900–2100 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 200 mm7.87 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: FeeTech
Stall Current: 0.9–1 A900–1000 mA
Shaft Power: 0.86–1.29 W
Weight: 0.71 oz20.0 g
Size Class: Micro
Diameter: —
Dimensions: 0.91×0.47×1.00 in 23.0×12.0×25.5 mm
Case Material: Aluminum
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: Counterclockwise
Op. Range: 120°
Mech. Limit: 360
Pulse Cycle: (add)
Pulse Width: 900–2100 µs
Neutral Pos.: 1500 µs
Dead Band: 2 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: -15–70°C5.0–158.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 150 mm5.91 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: FeeTech
Stall Current: (add)
Shaft Power: 0.67–1.18 W
Weight: 1.02 oz29.0 g
Size Class: Mini
Diameter: —
Dimensions: 1.39×0.60×1.16 in 35.2×15.2×29.5 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 120°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 900–2100 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: FeeTech
Stall Current: (add)
Shaft Power: 7.14–10.33 W
Weight: 1.02 oz29.0 g
Size Class: Mini
Diameter: —
Dimensions: 1.39×0.60×1.16 in 35.2×15.2×29.5 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 120°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 900–2100 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: 1.7–2.1 A1700–2100 mA
Shaft Power: 2.69 W
Weight: 2.29 oz65.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.79×1.53 in 40.1×20.1×38.9 mm
Case Material: (add)
Motor Type: Cored
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: Counterclockwise
Op. Range: 280°
Mech. Limit: (add)
Pulse Cycle: 20 ms
Pulse Width: 500–2500 µs
Neutral Pos.: (add)
Dead Band: 4 µs
Refresh Rate: 50 Hz
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: -15–70°C5.0–158.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: 2.3–3 A2300–3000 mA
Shaft Power: 2.29–3.40 W
Weight: 2.36 oz67.0 g
Size Class: Standard
Diameter: —
Dimensions: 2.17×0.79×1.69 in 55.0×20.0×43.0 mm
Case Material: Plastic / Aluminum
Motor Type: Cored
Motor Drive: (add)
Gear Material: Copper
Gear Spline/Teeth: 25
Rotation: Single Bearing
Modulation: Digital
Direction: Counterclockwise
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: 20 ms
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 4 µs
Refresh Rate: 50 Hz
Angle Sensor: Potentiometer
Control System: PWM
Programmable: (add)
Op. Voltage: 6–7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: IP54
Certification: RoHS
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: 3–3.5 A3000–3500 mA
Shaft Power: 2.85–4.26 W
Weight: 2.36 oz67.0 g
Size Class: Standard
Diameter: —
Dimensions: 2.17×0.79×1.69 in 55.0×20.0×43.0 mm
Case Material: Plastic / Aluminum
Motor Type: Cored
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Single Bearing
Modulation: Digital
Direction: Counterclockwise
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: 20 ms
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 4 µs
Refresh Rate: 50 Hz
Angle Sensor: Potentiometer
Control System: PWM
Programmable: (add)
Op. Voltage: 6–7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: IP54
Certification: (add)
Connector: JR
Wire Length: 300 mm11.81 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: 3.2–3.9 A3200–3900 mA
Shaft Power: 4.80 W
Weight: 2.36 oz67.0 g
Size Class: Large
Diameter: —
Dimensions: 2.17×0.79×1.69 in 55.0×20.0×43.0 mm
Case Material: Plastic / Aluminum
Motor Type: Cored
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: Counterclockwise
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: 20 ms
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 4 µs
Refresh Rate: 50 Hz
Angle Sensor: Potentiometer
Control System: PWM
Programmable: (add)
Op. Voltage: 4–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: IP54
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: China
Shape: —
Shaft Size: 5.9 mm
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: Position
Make: Feetech
Stall Current: ≤2.95 A≤2950 mA
Shaft Power: 3.26–6.08 W
Weight: 2.14 oz60.6 g
Size Class: Low Profile
Diameter: —
Dimensions: 1.60×0.79×1.05 in 40.6×20.0×26.6 mm
Case Material: Aluminum
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: Counterclockwise
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 4 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4–12 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: (add)
Shaft Power: 9.15 W
Weight: 2.38 oz67.6 g
Size Class: Standard
Diameter: —
Dimensions: 1.60×0.79×1.18 in 40.6×20.0×30.0 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: CE | ROHS
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: (add)
Shaft Power: 5.50 W
Weight: 1.47 oz41.6 g
Size Class: Low Profile
Diameter: —
Dimensions: 1.60×0.79×1.14 in 40.6×20.0×29.0 mm
Case Material: (add)
Motor Type: Cored
Motor Drive: (add)
Gear Material: Titanium
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: FeeTech
Stall Current: (add)
Shaft Power: 1.61–2.57 W
Weight: 1.80 oz51.0 g
Size Class: Low Profile
Diameter: —
Dimensions: 1.58×0.79×1.12 in 40.1×20.0×28.5 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Titanium
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 900–2100 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: FeeTech
Stall Current: (add)
Shaft Power: 1.94–2.67 W
Weight: 1.98 oz56.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.61×0.79×1.50 in 40.8×20.1×38.0 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 120°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 900–2100 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: FeeTech
Stall Current: (add)
Shaft Power: 2.15–2.84 W
Weight: 1.98 oz56.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.79×1.52 in 40.1×20.0×38.6 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 120°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 900–2100 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: Yes
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: -15–70°C5.0–158.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: FeeTech
Stall Current: ≤1.9 A≤1900 mA
Shaft Power: 2.24–3.17 W
Weight: 1.98 oz56.0 g
Size Class: Standard
Diameter: —
Dimensions: 2.13×0.79×1.85 in 54.0×20.0×47.0 mm
Case Material: Plastic / Aluminum
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Titanium
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 900–2100 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–7.2 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: FeeTech
Stall Current: (add)
Shaft Power: 2.39–3.39 W
Weight: 1.98 oz56.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.79×1.52 in 40.2×20.0×38.6 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: FeeTech
Stall Current: (add)
Shaft Power: 2.71–3.62 W
Weight: 1.98 oz56.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.79×1.52 in 40.2×20.0×38.6 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: FeeTech
Stall Current: (add)
Shaft Power: 2.86–3.85 W
Weight: 1.98 oz56.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.79×1.52 in 40.2×20.0×38.6 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: FeeTech
Stall Current: 2.6–3.6 A2600–3600 mA
Shaft Power: 3.72–7.47 W
Weight: 1.54 oz43.6 g
Size Class: Low Profile
Diameter: —
Dimensions: 1.60×0.79×1.05 in 40.6×20.0×26.6 mm
Case Material: Nylon / Fiberglass
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: Counterclockwise
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: 20 ms
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 2 µs
Refresh Rate: 50 Hz
Angle Sensor: Potentiometer
Control System: PWM
Programmable: (add)
Op. Voltage: 5–9 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: IP66
Certification: RoHS
Connector: JR (Universal)
Wire Length: 140 mm5.51 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: 2.6–3.6 A2600–3600 mA
Shaft Power: 6.76 W
Weight: 1.54 oz43.6 g
Size Class: Low Profile
Diameter: —
Dimensions: 1.60×0.79×1.05 in 40.6×20.0×26.6 mm
Case Material: Plastic
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 360°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: (add)
Dead Band: 2 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 5–9 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: Waterproof
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: ≤3.5 A≤3500 mA
Shaft Power: 4.25 W
Weight: 2.61 oz74.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.79×1.69 in 40.0×20.0×43.0 mm
Case Material: Plastic / Aluminum
Motor Type: Cored
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: Counterclockwise
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 4 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: 300 mm11.81 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: ≤3.5 A≤3500 mA
Shaft Power: 4.08 W
Weight: 2.61 oz74.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.79×1.69 in 40.0×20.0×43.0 mm
Case Material: Metal / Plastic
Motor Type: Cored
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: Counterclockwise
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 4 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: 300 mm11.81 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: ≤3.9 A≤3900 mA
Shaft Power: 4.08 W
Weight: 2.61 oz74.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.79×1.69 in 40.0×20.0×43.0 mm
Case Material: Plastic / Aluminum
Motor Type: Cored
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Single Bearing
Modulation: Digital
Direction: Counterclockwise
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 4 µs
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: (add)
Op. Voltage: 4–8.4 V
Power Source: External
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: IP54
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: (add)
Shaft Power: 2.05 W
Weight: 1.46 oz41.5 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.79×1.48 in 40.1×20.1×37.5 mm
Case Material: Plastic
Motor Type: Cored
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: ≤4.5 A≤4500 mA
Shaft Power: 10.14 W
Weight: 2.15 oz61.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.79×1.53 in 40.1×20.1×38.9 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 4 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 5–9 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Quick Tips
- Models with an asterisk (*) have been discontinued.
- Click on any servo model name to see more details about that product.
- Click on any brand name to filter all servos for that brand.
- In the desktop view, click on any column header to sort the table by that attribute. Click again to reverse the order.
Compare Prices for
Unable to load results. Please try again.