Discover XQ-Power Servos in Our eBay Store!
Shop NowSearch Matches (2,636)
- Weight: Greater than 1.76 ounces (50 grams)
- Torque: Greater than 417 oz-in (30.03 kg-cm / 2.9 N-m) @ 48 volts
Performance
Physical
Drivetrain
Control & Signal
Electrical & Environment
Connectivity
Origin
Preferences are saved automatically.
| Make | Model | Category | Torque | Speed | Stall Current |
Weight | Dimensions (L×W×H) |
Diameter | Size Class |
Case Material |
Motor Type |
Motor Drive |
Gear Material |
Gear Spline/ Teeth |
Rotation | Modulation | Direction | Op. Range |
Mech. Limit |
Pulse Cycle |
Pulse Width |
Neutral Pos. |
Dead Band |
Refresh Rate |
Angle Sensor |
Control System |
Programmable | Op. Voltage |
Power Source |
Regulator Type |
Temperature | Water Rating |
Certification | Connector | Wire Length |
Country of Origin |
Shaft Power |
Shape | Shaft Size |
Resolution | Gear Ratio |
Baud Rate |
Output Power |
Radial Load |
MCU | Operating Modes |
Running Current |
Rotation Mode |
Idle Current |
Backlash | Signal Voltage |
Compare | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| We may earn a commission from your purchase. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| JR | S8911BL-LS | Hobby |
8.4V 833.2 oz-in60.00 kg-cm5.9 N-m 7.4V 734.0 oz-in52.85 kg-cm5.2 N-m 6.6V 654.7 oz-in47.14 kg-cm4.6 N-m |
8.4V 0.11 s/60°545.5 deg/s90.9 RPM 7.4V 0.13 s/60°461.5 deg/s76.9 RPM 6.6V 0.15 s/60°400.0 deg/s66.7 RPM |
(add) | 3.02 oz85.5 g | 1.378×0.787×1.634 in 35.0×20.0×41.5 mm | — | Standard | (add) | Brushless | (add) | Steel | (add) | Dual Bearings | Digital | (add) | 180° | (add) | (add) | (add) | (add) | (add) | (add) | Hall Effect | PWM | (add) | 4.5–8.5 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 300 mm11.81 in | (add) | 8.07–14.01 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| JR | S8911BL2K | Hobby |
8.4V 914.3 oz-in65.84 kg-cm6.5 N-m 7.4V 805.4 oz-in58.00 kg-cm5.7 N-m 6.6V 718.4 oz-in51.73 kg-cm5.1 N-m 4.8V 522.4 oz-in37.62 kg-cm3.7 N-m |
8.4V 0.11 s/60°545.5 deg/s90.9 RPM 7.4V 0.13 s/60°461.5 deg/s76.9 RPM 6.6V 0.15 s/60°400.0 deg/s66.7 RPM 4.8V 0.20 s/60°300.0 deg/s50.0 RPM |
(add) | 2.79 oz79.0 g | 1.378×0.787×1.594 in 35.0×20.0×40.5 mm | — | Standard | Metal | Brushless | (add) | Steel | (add) | Dual Bearings | Digital | (add) | 180° | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | Yes | 4.5–8.5 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 300 mm11.81 in | (add) | 4.83–15.37 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | — | ||
| JR | S8911BL2K-BB | Hobby |
8.4V 914.3 oz-in65.84 kg-cm6.5 N-m 7.4V 805.4 oz-in58.00 kg-cm5.7 N-m 6.6V 718.4 oz-in51.73 kg-cm5.1 N-m |
8.4V 0.11 s/60°545.5 deg/s90.9 RPM 7.4V 0.13 s/60°461.5 deg/s76.9 RPM 6.6V 0.15 s/60°400.0 deg/s66.7 RPM |
(add) | 3.02 oz85.5 g | 1.378×0.787×1.634 in 35.0×20.0×41.5 mm | — | Standard | (add) | Brushless | (add) | Metal / Steel | (add) | Dual Bearings | Digital | (add) | 180° | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | Yes | 4.5–8.5 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 300 mm11.81 in | (add) | 8.86–15.37 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| JR | S8912 | Hobby | 12.6V 972.1 oz-in70.00 kg-cm6.9 N-m | 12.6V 0.11 s/60°545.5 deg/s90.9 RPM | (add) | 2.79 oz79.0 g | 1.575×0.787×1.772 in 40.0×20.0×45.0 mm | — | Standard | (add) | Brushless | (add) | Steel | (add) | Dual Bearings | Digital | (add) | 180° | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | (add) | 12–12 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 16.34 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| JR | S8914 | Hobby | 12.6V 694.4 oz-in50.00 kg-cm4.9 N-m | 12.6V 0.08 s/60°750.0 deg/s125.0 RPM | (add) | 2.79 oz79.0 g | 1.575×0.787×1.594 in 40.0×20.0×40.5 mm | — | Standard | (add) | Brushless | (add) | Steel | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | (add) | 12.6–12.6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 16.05 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| JR | S8914-BB | Hobby | 12.6V 694.4 oz-in50.00 kg-cm4.9 N-m | 12.6V 0.08 s/60°750.0 deg/s125.0 RPM | (add) | 2.79 oz79.0 g | 1.575×0.787×1.594 in 40.0×20.0×40.5 mm | — | Standard | Metal | Brushless | (add) | Steel | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | Yes | 12.6–12.6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 300 mm11.81 in | (add) | 16.05 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | — | ||
| JR | S8944S | Hobby |
8.4V 763.8 oz-in55.00 kg-cm5.4 N-m 7.4V 672.9 oz-in48.45 kg-cm4.8 N-m 6.6V 600.1 oz-in43.21 kg-cm4.2 N-m |
8.4V 0.08 s/60°750.0 deg/s125.0 RPM 7.4V 0.09 s/60°666.7 deg/s111.1 RPM 6.6V 0.10 s/60°600.0 deg/s100.0 RPM |
(add) | 2.79 oz79.0 g | 1.38×0.787×1.594 in 35.1×20.0×40.5 mm | — | Standard | Metal | Brushless | (add) | Steel | (add) | Dual Bearings | Digital | (add) | 180° | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | Yes | 4.5–8.5 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 300 mm11.81 in | (add) | 11.10–17.65 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| JR | S8955SS | Hobby |
8.4V 604.1 oz-in43.50 kg-cm4.3 N-m 7.4V 532.2 oz-in38.32 kg-cm3.8 N-m 6.6V 474.7 oz-in34.18 kg-cm3.4 N-m |
8.4V 0.05 s/60°1,200.0 deg/s200.0 RPM 7.4V 0.06 s/60°1,000.0 deg/s166.7 RPM 6.6V 0.06 s/60°1,000.0 deg/s166.7 RPM |
(add) | 2.79 oz79.0 g | 1.38×0.79×1.59 in 35.1×20.1×40.4 mm | — | Unknown | Metal | Brushless | (add) | Steel | (add) | Dual Bearings | Digital | (add) | 180° | (add) | (add) | (add) | 1500 µs | (add) | (add) | (add) | PWM | Yes | 4.5–8.5 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 300 mm11.81 in | (add) | 14.63–22.34 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | — | ||
| JR | S8955SS-BB | Hobby |
8.4V 604.1 oz-in43.50 kg-cm4.3 N-m 7.4V 532.2 oz-in38.32 kg-cm3.8 N-m 6.6V 474.7 oz-in34.18 kg-cm3.4 N-m |
8.4V 0.05 s/60°1,200.0 deg/s200.0 RPM 7.4V 0.06 s/60°1,000.0 deg/s166.7 RPM 6.6V 0.06 s/60°1,000.0 deg/s166.7 RPM |
(add) | 3.02 oz85.5 g | 1.575×0.787×1.673 in 40.0×20.0×42.5 mm | — | Unknown | Metal | Brushless | (add) | Steel | (add) | Dual Bearings | Digital | (add) | 180° | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | Yes | 4.5–8.5 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 300 mm11.81 in | (add) | 14.63–22.34 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| JR | S8977 | Hobby | 12.6V 638.8 oz-in46.00 kg-cm4.5 N-m | 12.6V 0.09 s/60°666.7 deg/s111.1 RPM | (add) | 2.68 oz76.0 g | 1.575×0.827×1.772 in 40.0×21.0×45.0 mm | — | Standard | (add) | Brushless | (add) | Steel | (add) | Dual Bearings | Digital | (add) | 180° | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | Yes | 12.6–12.6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 13.12 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| JR | S89CYC | Hobby |
8.4V 402.7 oz-in29.00 kg-cm2.8 N-m 7.4V 359.7 oz-in25.90 kg-cm2.5 N-m 6.0V 291.6 oz-in21.00 kg-cm2.1 N-m |
8.4V 0.09 s/60°666.7 deg/s111.1 RPM 7.4V 0.10 s/60°600.0 deg/s100.0 RPM 6.0V 0.11 s/60°545.5 deg/s90.9 RPM |
(add) | 2.82 oz80.0 g | 1.38×0.79×1.59 in 35.1×20.1×40.4 mm | — | Standard | (add) | Brushless | (add) | Metal | (add) | Dual Bearings | Digital | (add) | 180° | (add) | (add) | 760 µs | 760 µs | (add) | (add) | (add) | PWM / Serial | Yes | 4.5–8.5 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 300 mm11.81 in | (add) | 4.90–8.27 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| JR | S89HR | Hobby |
8.4V 85.1 oz-in6.13 kg-cm0.6 N-m 7.4V 74.9 oz-in5.39 kg-cm0.5 N-m 6.6V 65.8 oz-in4.74 kg-cm0.5 N-m |
8.4V 0.03 s/60°2,000.0 deg/s333.3 RPM 7.4V 0.03 s/60°2,000.0 deg/s333.3 RPM 6.6V 0.04 s/60°1,500.0 deg/s250.0 RPM |
(add) | 2.25 oz63.8 g | 1.575×0.787×1.594 in 40.0×20.0×40.5 mm | — | Standard | Metal | Brushless | (add) | Steel | 25 | Dual Bearings | Digital | (add) | 180° | (add) | 3.003 ms | 760 µs | 760 µs | (add) | 333 Hz | (add) | PWM | Yes | 4.5–8.5 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 300 mm11.81 in | (add) | 3.04–5.25 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | — | ||
| JR | SR8801 * | Hobby | 7.4V 395.8 oz-in28.50 kg-cm2.8 N-m | 7.4V 0.14 s/60°428.6 deg/s71.4 RPM | (add) | 2.30 oz65.2 g | 1.59×0.83×1.41 in 40.4×21.1×35.8 mm | — | Standard | (add) | (add) | (add) | (add) | 23 | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 7.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 5.23 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| JR | Z2750 * | Hobby | 4.8V 62.0 oz-in4.46 kg-cm0.4 N-m | 4.8V 0.17 s/60°352.9 deg/s58.8 RPM | (add) | 2.00 oz56.7 g | 1.52×0.73×1.29 in 38.6×18.5×32.8 mm | — | Standard | (add) | Coreless | (add) | (add) | 23 | Dual Bearings | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.67 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| JR | Z4800S * | Hobby |
6.0V 90.0 oz-in6.48 kg-cm0.6 N-m 4.8V 71.0 oz-in5.11 kg-cm0.5 N-m |
6.0V 0.11 s/60°545.5 deg/s90.9 RPM 4.8V 0.14 s/60°428.6 deg/s71.4 RPM |
(add) | 2.00 oz56.7 g | 1.54×0.75×1.36 in 39.1×19.0×34.5 mm | — | Standard | (add) | Coreless | (add) | Metal | 23 | Dual Bearings | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.94–1.51 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| JR | Z4800T * | Hobby |
6.0V 162.0 oz-in11.67 kg-cm1.1 N-m 4.8V 127.0 oz-in9.14 kg-cm0.9 N-m |
6.0V 0.16 s/60°375.0 deg/s62.5 RPM 4.8V 0.19 s/60°315.8 deg/s52.6 RPM |
(add) | 2.00 oz56.7 g | 1.54×0.75×1.36 in 39.1×19.0×34.5 mm | — | Standard | (add) | Coreless | (add) | Metal | 23 | Dual Bearings | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 1.24–1.87 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| JR | Z8800S * | Hobby |
6.0V 98.0 oz-in7.06 kg-cm0.7 N-m 4.8V 88.0 oz-in6.34 kg-cm0.6 N-m |
6.0V 0.08 s/60°750.0 deg/s125.0 RPM 4.8V 0.10 s/60°600.0 deg/s100.0 RPM |
(add) | 2.00 oz56.7 g | 1.54×0.75×1.36 in 39.1×19.0×34.5 mm | — | Standard | (add) | Coreless | (add) | Metal | 23 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 1.63–2.27 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| JR | Z8800T * | Hobby |
6.0V 188.0 oz-in13.54 kg-cm1.3 N-m 4.8V 155.0 oz-in11.16 kg-cm1.1 N-m |
6.0V 0.15 s/60°400.0 deg/s66.7 RPM 4.8V 0.18 s/60°333.3 deg/s55.6 RPM |
(add) | 2.00 oz56.7 g | 1.54×0.75×1.36 in 39.1×19.0×34.5 mm | — | Standard | (add) | Coreless | (add) | Metal | 23 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 1.59–2.32 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| JR | Z9100HVS * | Hobby | 7.4V 230.0 oz-in16.56 kg-cm1.6 N-m | 7.4V 0.06 s/60°1,000.0 deg/s166.7 RPM | (add) | 2.60 oz73.7 g | 1.58×0.82×1.57 in 40.1×20.8×39.9 mm | — | Standard | Aluminum | Coreless | (add) | Steel | 23 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 6–8.4 V | 2S LiPo | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 7.09 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| JR | Z9100HVT * | Hobby | 7.4V 480.0 oz-in34.56 kg-cm3.4 N-m | 7.4V 0.06 s/60°1,000.0 deg/s166.7 RPM | (add) | 2.60 oz73.7 g | 1.58×0.82×1.57 in 40.1×20.8×39.9 mm | — | Standard | Aluminum | Coreless | (add) | Steel | 23 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 7.4 V | 2S LiPo | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 14.79 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| JR | Z9100S * | Hobby |
6.0V 180.0 oz-in12.96 kg-cm1.3 N-m 4.8V 150.0 oz-in10.80 kg-cm1.1 N-m |
6.0V 0.06 s/60°1,000.0 deg/s166.7 RPM 4.8V 0.08 s/60°750.0 deg/s125.0 RPM |
(add) | 2.30 oz65.2 g | 1.59×0.83×1.57 in 40.4×21.1×39.9 mm | — | Standard | (add) | Coreless | (add) | Metal | 23 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 3.47–5.55 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| JR | Z9100T * | Hobby |
6.0V 370.0 oz-in26.64 kg-cm2.6 N-m 4.8V 300.0 oz-in21.60 kg-cm2.1 N-m |
6.0V 0.15 s/60°400.0 deg/s66.7 RPM 4.8V 0.18 s/60°333.3 deg/s55.6 RPM |
(add) | 2.30 oz65.2 g | 1.59×0.83×1.57 in 40.4×21.1×39.9 mm | — | Standard | (add) | Coreless | (add) | Metal | 23 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 3.08–4.56 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| JX Servo | B60 | Hobby |
8.4V 860.6 oz-in61.97 kg-cm6.1 N-m 7.4V 860.6 oz-in61.97 kg-cm6.1 N-m 6.0V 722.1 oz-in52.00 kg-cm5.1 N-m |
7.4V 0.11 s/60°545.5 deg/s90.9 RPM 6.0V 0.13 s/60°461.5 deg/s76.9 RPM |
(add) | 3.07 oz87.0 g | 1.575×0.787×1.705 in 40.0×20.0×43.3 mm | — | Standard | Aluminum | Brushless | (add) | Steel | 25 | Dual Bearings | Digital | (add) | 180° | (add) | (add) | 500–2500 µs | (add) | 2 µs | 330 Hz | (add) | (add) | (add) | 6–7.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 265 mm10.43 in | China | 10.27–14.47 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| JX Servo | B70 | Hobby | 12.0V 972.1 oz-in70.00 kg-cm6.9 N-m |
12.0V 0.10 s/60°600.0 deg/s100.0 RPM 11.1V 0.12 s/60°500.0 deg/s83.3 RPM |
(add) | 3.07 oz87.0 g | 1.575×0.787×1.705 in 40.0×20.0×43.3 mm | — | Standard | Aluminum | Brushless | (add) | Steel | 25 | Dual Bearings | Digital | (add) | (add) | (add) | 3.03 ms | (add) | 1520 µs | 2 µs | 330 Hz | (add) | (add) | (add) | 11.1–12 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 265 mm10.43 in | China | 17.97 W | — | (add) | — | — | — | — | — | — | — | (add) | Multi-turn | (add) | — | — | ||
| JX Servo | BLS-12V7137 | Hobby |
14.0V 520.9 oz-in37.51 kg-cm3.7 N-m 11.1V 458.4 oz-in33.01 kg-cm3.2 N-m |
14.0V 0.08 s/60°750.0 deg/s125.0 RPM 11.1V 0.10 s/60°600.0 deg/s100.0 RPM |
(add) | 2.50 oz71.0 g | 1.57×0.79×1.48 in 39.9×20.1×37.6 mm | — | Standard | Aluminum | Brushless | (add) | Steel | 25 | Dual Bearings | Digital | (add) | 120° | (add) | 3.03 ms | (add) | 1520 µs | 1 µs | 330 Hz | (add) | Digital (Brushless) | Yes | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 265 mm10.43 in | China | 8.48–12.04 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | — | ||
Make: JR
Stall Current: (add)
Shaft Power: 8.07–14.01 W
Weight: 3.02 oz85.5 g
Size Class: Standard
Diameter: —
Dimensions: 1.378×0.787×1.634 in 35.0×20.0×41.5 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Hall Effect
Control System: PWM
Programmable: (add)
Op. Voltage: 4.5–8.5 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: JR
Stall Current: (add)
Shaft Power: 4.83–15.37 W
Weight: 2.79 oz79.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.378×0.787×1.594 in 35.0×20.0×40.5 mm
Case Material: Metal
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: Yes
Op. Voltage: 4.5–8.5 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: JR
Stall Current: (add)
Shaft Power: 8.86–15.37 W
Weight: 3.02 oz85.5 g
Size Class: Standard
Diameter: —
Dimensions: 1.378×0.787×1.634 in 35.0×20.0×41.5 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal / Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: Yes
Op. Voltage: 4.5–8.5 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: JR
Stall Current: (add)
Shaft Power: 16.34 W
Weight: 2.79 oz79.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.575×0.787×1.772 in 40.0×20.0×45.0 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 12–12 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: JR
Stall Current: (add)
Shaft Power: 16.05 W
Weight: 2.79 oz79.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.575×0.787×1.594 in 40.0×20.0×40.5 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 12.6–12.6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: JR
Stall Current: (add)
Shaft Power: 16.05 W
Weight: 2.79 oz79.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.575×0.787×1.594 in 40.0×20.0×40.5 mm
Case Material: Metal
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: Yes
Op. Voltage: 12.6–12.6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: JR
Stall Current: (add)
Shaft Power: 11.10–17.65 W
Weight: 2.79 oz79.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.38×0.787×1.594 in 35.1×20.0×40.5 mm
Case Material: Metal
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: Yes
Op. Voltage: 4.5–8.5 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: JR
Stall Current: (add)
Shaft Power: 14.63–22.34 W
Weight: 2.79 oz79.0 g
Size Class: Unknown
Diameter: —
Dimensions: 1.38×0.79×1.59 in 35.1×20.1×40.4 mm
Case Material: Metal
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: Yes
Op. Voltage: 4.5–8.5 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: JR
Stall Current: (add)
Shaft Power: 14.63–22.34 W
Weight: 3.02 oz85.5 g
Size Class: Unknown
Diameter: —
Dimensions: 1.575×0.787×1.673 in 40.0×20.0×42.5 mm
Case Material: Metal
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: Yes
Op. Voltage: 4.5–8.5 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: JR
Stall Current: (add)
Shaft Power: 13.12 W
Weight: 2.68 oz76.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.575×0.827×1.772 in 40.0×21.0×45.0 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: Yes
Op. Voltage: 12.6–12.6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: JR
Stall Current: (add)
Shaft Power: 4.90–8.27 W
Weight: 2.82 oz80.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.38×0.79×1.59 in 35.1×20.1×40.4 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 760 µs
Neutral Pos.: 760 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM / Serial
Programmable: Yes
Op. Voltage: 4.5–8.5 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: JR
Stall Current: (add)
Shaft Power: 3.04–5.25 W
Weight: 2.25 oz63.8 g
Size Class: Standard
Diameter: —
Dimensions: 1.575×0.787×1.594 in 40.0×20.0×40.5 mm
Case Material: Metal
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: 3.003 ms
Pulse Width: 760 µs
Neutral Pos.: 760 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: PWM
Programmable: Yes
Op. Voltage: 4.5–8.5 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: JR
Stall Current: (add)
Shaft Power: 5.23 W
Weight: 2.30 oz65.2 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.83×1.41 in 40.4×21.1×35.8 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: (add)
Gear Spline/Teeth: 23
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: JR
Stall Current: (add)
Shaft Power: 0.67 W
Weight: 2.00 oz56.7 g
Size Class: Standard
Diameter: —
Dimensions: 1.52×0.73×1.29 in 38.6×18.5×32.8 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: (add)
Gear Spline/Teeth: 23
Rotation: Dual Bearings
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: JR
Stall Current: (add)
Shaft Power: 0.94–1.51 W
Weight: 2.00 oz56.7 g
Size Class: Standard
Diameter: —
Dimensions: 1.54×0.75×1.36 in 39.1×19.0×34.5 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 23
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: JR
Stall Current: (add)
Shaft Power: 1.24–1.87 W
Weight: 2.00 oz56.7 g
Size Class: Standard
Diameter: —
Dimensions: 1.54×0.75×1.36 in 39.1×19.0×34.5 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 23
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: JR
Stall Current: (add)
Shaft Power: 1.63–2.27 W
Weight: 2.00 oz56.7 g
Size Class: Standard
Diameter: —
Dimensions: 1.54×0.75×1.36 in 39.1×19.0×34.5 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 23
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: JR
Stall Current: (add)
Shaft Power: 1.59–2.32 W
Weight: 2.00 oz56.7 g
Size Class: Standard
Diameter: —
Dimensions: 1.54×0.75×1.36 in 39.1×19.0×34.5 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 23
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: JR
Stall Current: (add)
Shaft Power: 7.09 W
Weight: 2.60 oz73.7 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.82×1.57 in 40.1×20.8×39.9 mm
Case Material: Aluminum
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 23
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: 2S LiPo
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: JR
Stall Current: (add)
Shaft Power: 14.79 W
Weight: 2.60 oz73.7 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.82×1.57 in 40.1×20.8×39.9 mm
Case Material: Aluminum
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 23
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 7.4 V
Power Source: 2S LiPo
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: JR
Stall Current: (add)
Shaft Power: 3.47–5.55 W
Weight: 2.30 oz65.2 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.83×1.57 in 40.4×21.1×39.9 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 23
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: JR
Stall Current: (add)
Shaft Power: 3.08–4.56 W
Weight: 2.30 oz65.2 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.83×1.57 in 40.4×21.1×39.9 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 23
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: JX Servo
Stall Current: (add)
Shaft Power: 10.27–14.47 W
Weight: 3.07 oz87.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.575×0.787×1.705 in 40.0×20.0×43.3 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: (add)
Dead Band: 2 µs
Refresh Rate: 330 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 6–7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 265 mm10.43 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: JX Servo
Stall Current: (add)
Shaft Power: 17.97 W
Weight: 3.07 oz87.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.575×0.787×1.705 in 40.0×20.0×43.3 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: 3.03 ms
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: 2 µs
Refresh Rate: 330 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 11.1–12 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 265 mm10.43 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: JX Servo
Stall Current: (add)
Shaft Power: 8.48–12.04 W
Weight: 2.50 oz71.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.48 in 39.9×20.1×37.6 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 120°
Mech. Limit: (add)
Pulse Cycle: 3.03 ms
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: 1 µs
Refresh Rate: 330 Hz
Angle Sensor: (add)
Control System: Digital (Brushless)
Programmable: Yes
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 265 mm10.43 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Quick Tips
- Models with an asterisk (*) have been discontinued.
- Click on any servo model name to see more details about that product.
- Click on any brand name to filter all servos for that brand.
- In the desktop view, click on any column header to sort the table by that attribute. Click again to reverse the order.
Compare Prices for
Unable to load results. Please try again.