Discover XQ-Power Servos in Our eBay Store!
Shop NowSearch Matches (2,636)
- Weight: Greater than 1.76 ounces (50 grams)
- Torque: Greater than 417 oz-in (30.03 kg-cm / 2.9 N-m) @ 48 volts
Performance
Physical
Drivetrain
Control & Signal
Electrical & Environment
Connectivity
Origin
Preferences are saved automatically.
| Make | Model | Category | Torque | Speed | Stall Current |
Weight | Dimensions (L×W×H) |
Diameter | Size Class |
Case Material |
Motor Type |
Motor Drive |
Gear Material |
Gear Spline/ Teeth |
Rotation | Modulation | Direction | Op. Range |
Mech. Limit |
Pulse Cycle |
Pulse Width |
Neutral Pos. |
Dead Band |
Refresh Rate |
Angle Sensor |
Control System |
Programmable | Op. Voltage |
Power Source |
Regulator Type |
Temperature | Water Rating |
Certification | Connector | Wire Length |
Country of Origin |
Shaft Power |
Shape | Shaft Size |
Resolution | Gear Ratio |
Baud Rate |
Output Power |
Radial Load |
MCU | Operating Modes |
Running Current |
Rotation Mode |
Idle Current |
Backlash | Signal Voltage |
Compare | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| We may earn a commission from your purchase. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Feetech | FT5830M | Hobby |
7.4V 423.7 oz-in30.51 kg-cm3.0 N-m 6.0V 340.2 oz-in24.50 kg-cm2.4 N-m |
7.4V 0.20 s/60°300.0 deg/s50.0 RPM 6.0V 0.25 s/60°240.0 deg/s40.0 RPM |
3–3.5 A3000–3500 mA | 2.61 oz74.0 g | 1.575×0.787×1.693 in 40.0×20.0×43.0 mm | — | Standard | Plastic / Aluminum | Cored | (add) | Steel | 25 | Dual Bearings | Digital | Counterclockwise | 180° | 220 | 20 ms | 500–2500 µs | 1500 µs | 4 µs | (add) | Potentiometer | PWM | (add) | 4–8.4 V | (add) | (add) | -20–60°C-4.0–140.0°F | IP54 | (add) | JR (Universal) | 300 mm11.81 in | China | 2.52–3.92 W | — | (add) | — | — | — | — | — | — | — | 0.250 A @ 7.4V250 mA @ 7.4V | Positional | 0.006 A6 mA | 0.500° | — | ||
| Feetech | FT5835M | Hobby | 7.4V 423.7 oz-in30.51 kg-cm3.0 N-m | 7.4V 0.19 s/60°312.5 deg/s52.1 RPM | ≤3.9 A≤3900 mA | 2.61 oz74.0 g | 1.575×0.787×1.693 in 40.0×20.0×43.0 mm | — | Standard | Plastic / Aluminum | Cored | (add) | Stainless Steel | 25 | Single Bearing | Digital | Counterclockwise | 180° | (add) | (add) | 500–2500 µs | 1500 µs | 4 µs | (add) | Magnetic Encoder | PWM | (add) | 4–8.4 V | External | (add) | -20–60°C-4.0–140.0°F | IP54 | (add) | JR (Universal) | 300 mm11.81 in | China | 4.08 W | — | (add) | — | — | — | — | — | — | — | 0.290 A @ 7.4V290 mA @ 7.4V | Positional | 0.006 A6 mA | — | — | ||
| Feetech | FT5930M | Hobby | 8.4V 548.7 oz-in39.51 kg-cm3.9 N-m | 8.4V 0.10 s/60°600.0 deg/s100.0 RPM | ≤4.5 A≤4500 mA | 2.15 oz61.0 g | 1.579×0.791×1.532 in 40.1×20.1×38.9 mm | — | Standard | (add) | Coreless | (add) | Steel | 25 | Single Bearing | Digital | (add) | 180° | (add) | (add) | 500–2500 µs | 1500 µs | 4 µs | (add) | (add) | PWM | (add) | 5–9 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 300 mm11.81 in | China | 10.14 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | 0.020 A20 mA | — | — | ||
| Feetech | FT6325M | Hobby |
7.4V 347.3 oz-in25.00 kg-cm2.5 N-m 6.0V 284.8 oz-in20.50 kg-cm2.0 N-m |
7.4V 0.15 s/60°397.4 deg/s66.2 RPM 6.0V 0.19 s/60°324.3 deg/s54.1 RPM |
3–3.5 A3000–3500 mA | 2.36 oz67.0 g | 2.165×0.787×1.693 in 55.0×20.0×43.0 mm | — | Standard | Nylon / Aluminum | Cored | (add) | Steel | 25 | Single Bearing | Digital | Counterclockwise | 360° | (add) | (add) | 500–2500 µs | 1500 µs | 4 µs | (add) | Magnetic Encoder | PWM | (add) | 6–8.4 V | (add) | (add) | -20–60°C-4.0–140.0°F | IP54 | RoHS | JR | 300 mm11.81 in | China | 2.85–4.25 W | — | (add) | — | — | — | — | — | — | — | 0.120 A @ 7.4V120 mA @ 7.4V | Continuous | 0.006 A6 mA | — | — | ||
| Feetech | FT6335M | Hobby |
7.4V 493.0 oz-in35.50 kg-cm3.5 N-m 6.0V 400.0 oz-in28.80 kg-cm2.8 N-m |
7.4V 0.19 s/60°312.5 deg/s52.1 RPM 6.0V 0.24 s/60°252.1 deg/s42.0 RPM |
3.2–3.9 A3200–3900 mA | 2.36 oz67.0 g | 2.165×0.787×1.693 in 55.0×20.0×43.0 mm | — | Standard | Plastic / Aluminum | Cored | (add) | Steel | 25 | Single Bearing | Digital | Counterclockwise | 360° | (add) | 20 ms | 500–2500 µs | 1500 µs | 4 µs | (add) | Magnetic Encoder | PWM | (add) | 6–7.4 V | (add) | (add) | -20–60°C-4.0–140.0°F | IP54 | RoHS | JR | 300 mm11.81 in | China | 3.11–4.75 W | — | (add) | — | — | — | — | — | — | — | 0.180 A @ 7.4V180 mA @ 7.4V | Positional | 0.006 A6 mA | 0.500° | — | ||
| Feetech | FT6365M | Hobby | 7.4V 902.7 oz-in65.00 kg-cm6.4 N-m | 7.4V 0.23 s/60°264.3 deg/s44.1 RPM | ≤10.2 A≤10200 mA | 8.30 oz235.2 g | 2.559×1.181×2.299 in 65.0×30.0×58.4 mm | — | Giant | Aluminum | Cored | (add) | Steel | 15 | Single Bearing | Digital | (add) | 360° | (add) | (add) | 500–2500 µs | (add) | (add) | (add) | Magnetic Encoder | PWM | (add) | 4–8.4 V | (add) | (add) | -20–60°C-4.0–140.0°F | (add) | (add) | JR (Universal) | 300 mm11.81 in | China | 7.35 W | — | (add) | — | — | — | — | — | — | — | 0.300 A @ 7.4V300 mA @ 7.4V | Continuous | 0.030 A30 mA | — | — | ||
| Feetech | FT7115 | Hobby | 7.4V 270.9 oz-in19.50 kg-cm1.9 N-m | 7.4V 0.16 s/60°372.7 deg/s62.1 RPM | ≤3.5 A≤3500 mA | 2.18 oz61.9 g | 1.581×0.794×1.577 in 40.2×20.2×40.1 mm | — | Standard | Aluminum | Cored | (add) | Copper | 25 | Dual Bearings | Digital | Counterclockwise | 180° | (add) | (add) | 500–2500 µs | 1500 µs | 4 µs | (add) | (add) | PWM | (add) | 4–8.4 V | (add) | (add) | -10–60°C14.0–140.0°F | (add) | (add) | (add) | 300 mm11.81 in | China | 3.11 W | — | (add) | — | — | — | — | — | — | — | 0.140 A @ 7.4V140 mA @ 7.4V | Positional | 0.006 A6 mA | — | — | ||
| Feetech | FT7125 | Hobby | 8.4V 395.9 oz-in28.51 kg-cm2.8 N-m | 7.4V 0.14 s/60°431.7 deg/s71.9 RPM | ≤3.4 A≤3400 mA | 2.28 oz64.5 g | 1.581×0.794×1.577 in 40.2×20.2×40.1 mm | — | Standard | Aluminum | Cored | (add) | Steel | 25 | Single Bearing | Digital | Counterclockwise | 180° | (add) | (add) | 500–2500 µs | 1500 µs | 4 µs | (add) | (add) | PWM | (add) | 4–8.4 V | (add) | (add) | (add) | (add) | (add) | (add) | 300 mm11.81 in | China | — | — | (add) | — | — | — | — | — | — | — | (add) | Positional | 0.006 A6 mA | — | — | ||
| Feetech | FT7135M | Hobby | 7.4V 486.1 oz-in35.00 kg-cm3.4 N-m |
7.4V 0.17 s/60°348.8 deg/s58.1 RPM 6.0V 0.25 s/60°240.0 deg/s40.0 RPM |
(add) | 2.28 oz64.5 g | 1.581×0.794×1.577 in 40.2×20.2×40.1 mm | — | Standard | Aluminum | Cored | (add) | Steel | 25 | Single Bearing | Digital | (add) | 180° | (add) | (add) | 500–2500 µs | (add) | 2 µs | (add) | (add) | PWM | (add) | 6–8.4 V | (add) | (add) | (add) | Waterproof | RoHS | (add) | (add) | China | 5.23 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | — | ||
| Feetech | FT7235 | Hobby |
8.4V 475.8 oz-in34.26 kg-cm3.4 N-m 7.4V 429.9 oz-in30.95 kg-cm3.0 N-m 6.0V 349.2 oz-in25.14 kg-cm2.5 N-m |
8.4V 0.10 s/60°612.2 deg/s102.0 RPM 7.4V 0.11 s/60°540.5 deg/s90.1 RPM 6.0V 0.14 s/60°422.5 deg/s70.4 RPM |
2.5–3.6 A2500–3600 mA | 2.28 oz64.5 g | 1.602×0.794×1.437 in 40.7×20.2×36.5 mm | — | Standard | Aluminum | Coreless | (add) | Steel | 25 | Single Bearing | Digital | Counterclockwise | 180° | (add) | 20 ms | 500–2500 µs | 1500 µs | 4 µs | 50 Hz | Potentiometer | PWM | (add) | 4–9 V | (add) | (add) | -10–60°C14.0–140.0°F | IP54 | RoHS | JR (Universal) | 300 mm11.81 in | China | 4.55–8.98 W | — | (add) | — | 275.000 | — | — | — | — | — | 0.340 A @ 8.4V340 mA @ 8.4V | Positional | 0.010 A10 mA | 0.500° | — | ||
| Feetech | FT810BL | Hobby | 7.4V 138.9 oz-in10.00 kg-cm1.0 N-m | 7.4V 0.07 s/60°857.1 deg/s142.9 RPM | (add) | 2.96 oz84.0 g | 2.144×0.787×1.533 in 54.5×20.0×38.9 mm | — | Large | Aluminum | Brushless | (add) | Steel | 25 | Dual Bearings | Digital | Counterclockwise | 180° | (add) | (add) | 500–2500 µs | (add) | (add) | (add) | (add) | PWM | (add) | 6–7.4 V | (add) | (add) | (add) | Waterproof | (add) | (add) | (add) | China | 3.67 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | — | ||
| Feetech | FT815BL | Hobby | 7.4V 208.4 oz-in15.00 kg-cm1.5 N-m | 7.4V 0.10 s/60°600.0 deg/s100.0 RPM | (add) | 2.96 oz84.0 g | 2.144×0.787×1.533 in 54.5×20.0×38.9 mm | — | Large | Metal | Brushless | (add) | Steel | 25 | Dual Bearings | Digital | (add) | 180° | (add) | (add) | 500–2500 µs | (add) | (add) | (add) | (add) | PWM | (add) | 6–7.4 V | (add) | (add) | (add) | Water Resistant | (add) | (add) | (add) | China | 3.85 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | — | ||
| Feetech | FT825BL | Hobby | 7.4V 347.3 oz-in25.00 kg-cm2.5 N-m | 7.4V 0.12 s/60°504.2 deg/s84.0 RPM | ≤4.2 A≤4200 mA | 2.96 oz84.0 g | 2.142×0.787×1.535 in 54.4×20.0×39.0 mm | — | Large | Aluminum | Brushless | (add) | Steel | 25 | Dual Bearings | Digital | Counterclockwise | 180° | (add) | (add) | 500–2500 µs | 1500 µs | 4 µs | (add) | (add) | PWM | (add) | 6–7.4 V | (add) | (add) | -20–60°C-4.0–140.0°F | (add) | (add) | (add) | 300 mm11.81 in | China | 5.40 W | — | (add) | — | — | — | — | — | — | — | 0.250 A @ 7.4V250 mA @ 7.4V | Positional | 0.006 A6 mA | — | — | ||
| Feetech | FT830BL | Hobby |
7.4V 416.7 oz-in30.01 kg-cm2.9 N-m 6.0V 340.2 oz-in24.50 kg-cm2.4 N-m |
7.4V 0.14 s/60°444.4 deg/s74.1 RPM 6.0V 0.17 s/60°352.9 deg/s58.8 RPM |
3.5–4.2 A3500–4200 mA | 2.98 oz84.5 g | 2.144×0.787×1.533 in 54.5×20.0×38.9 mm | — | Standard | Aluminum | Brushless | (add) | Steel | 25 | Single Bearing | Digital | Counterclockwise | 180° | (add) | (add) | 500–2500 µs | 1500 µs | 4 µs | 50 Hz | Potentiometer | PWM | (add) | 6–7.4 V | (add) | (add) | -20–60°C-4.0–140.0°F | (add) | RoHS | JR (Universal) | 300 mm11.81 in | China | 3.70–5.71 W | — | (add) | — | — | — | — | — | — | — | 0.180 A @ 7.4V180 mA @ 7.4V | Positional | 0.006 A6 mA | 0.500° | — | ||
| Feetech | FT8346M | Hobby | 7.4V 555.6 oz-in40.01 kg-cm3.9 N-m | 7.4V 0.22 s/60°272.7 deg/s45.5 RPM | 1.1–1.45 A1100–1450 mA | 3.23 oz91.5 g | 1.575×0.787×1.695 in 40.0×20.0×43.1 mm | — | Standard | Aluminum | Coreless | (add) | Steel | 25 | Single Bearing | Digital | Counterclockwise | 360° | (add) | 20 ms | 500–2500 µs | 1500 µs | 4 µs | 50 Hz | Magnetic Encoder | PWM | (add) | 4–8.4 V | (add) | (add) | -20–60°C-4.0–140.0°F | (add) | (add) | JR (Universal) | 300 mm11.81 in | China | 4.67 W | — | (add) | — | — | — | — | — | — | — | 0.300 A @ 7.4V300 mA @ 7.4V | Continuous | 0.006 A6 mA | 0.500° | — | ||
| Feetech | FT835BL * | Hobby |
8.4V 555.5 oz-in40.00 kg-cm3.9 N-m 7.4V 486.1 oz-in35.00 kg-cm3.4 N-m 6.0V 416.6 oz-in30.00 kg-cm2.9 N-m |
8.4V 0.13 s/60°480.0 deg/s80.0 RPM | 2.6–4.5 A2600–4500 mA | 2.72 oz77.2 g | 1.575×0.787×1.433 in 40.0×20.0×36.4 mm | — | Standard | Aluminum | Brushless | (add) | Steel | 25 | Dual Bearings | Digital | Counterclockwise | 180° | 200 | (add) | 500–2500 µs | 1500 µs | 4 µs | 330 Hz | (add) | PWM | Yes | 4–8.4 V | (add) | (add) | -15–70°C5.0–158.0°F | (add) | (add) | JR (Universal) | 300 mm11.81 in | China | 8.22 W | — | (add) | — | — | — | — | — | — | — | 0.230 A @ 8.4V230 mA @ 8.4V | Positional | 0.230 A230 mA | — | — | ||
| Feetech | FT846BL | Hobby |
7.4V 555.5 oz-in40.00 kg-cm3.9 N-m 6.0V 451.3 oz-in32.50 kg-cm3.2 N-m |
7.4V 0.15 s/60°397.4 deg/s66.2 RPM 6.0V 0.19 s/60°324.3 deg/s54.1 RPM |
3.5–4.4 A3500–4400 mA | 3.23 oz91.5 g | 1.575×0.787×1.496 in 40.0×20.0×38.0 mm | — | Standard | Aluminum | Brushless | (add) | Steel | 25 | Single Bearing | Digital | Counterclockwise | 180° | (add) | (add) | 500–2500 µs | 1500 µs | 4 µs | (add) | (add) | PWM | Yes | 4–8.4 V | (add) | (add) | -20–60°C-4.0–140.0°F | Splashproof | (add) | JR (Universal) | 300 mm11.81 in | China | 4.51–6.80 W | — | 5.9 mm | — | — | — | — | — | — | — | 0.300 A @ 7.4V300 mA @ 7.4V | Positional | 0.006 A6 mA | — | — | ||
| Feetech | FT850M | Hobby | 8.4V 764.0 oz-in55.01 kg-cm5.4 N-m | 8.4V 0.10 s/60°612.2 deg/s102.0 RPM | (add) | 2.54 oz72.0 g | 1.575×0.787×1.433 in 40.0×20.0×36.4 mm | — | Standard | Aluminum | Coreless | (add) | Steel | 25 | Dual Bearings | Digital | Counterclockwise | 180° | (add) | (add) | 500–2500 µs | 1500 µs | 4 µs | (add) | (add) | PWM | (add) | 5–9 V | (add) | (add) | -20–60°C-4.0–140.0°F | (add) | (add) | (add) | 350 mm13.78 in | China | 14.41 W | — | (add) | — | — | — | — | — | — | — | 0.420 A @ 8.4V420 mA @ 8.4V | Positional | 0.036 A36 mA | — | — | ||
| Feetech | FT860B | Hobby | 8.4V 972.3 oz-in70.01 kg-cm6.9 N-m | 8.4V 0.09 s/60°697.7 deg/s116.3 RPM | (add) | 2.96 oz84.0 g | 1.575×0.787×1.571 in 40.0×20.0×39.9 mm | — | Standard | Aluminum | Brushless | (add) | Steel | 25 | Single Bearing | Digital | Counterclockwise | 180° | (add) | (add) | 500–2500 µs | 1500 µs | 4 µs | (add) | (add) | PWM | (add) | 6–9 V | (add) | (add) | -20–60°C-4.0–140.0°F | (add) | (add) | (add) | 300 mm11.81 in | China | 20.90 W | — | (add) | — | — | — | — | — | — | — | 0.490 A @ 8.4V490 mA @ 8.4V | Positional | 0.012 A12 mA | — | — | ||
| Feetech | FT870B | Hobby | 8.4V 1,041.8 oz-in75.01 kg-cm7.4 N-m | 8.4V 0.14 s/60°422.5 deg/s70.4 RPM | (add) | 2.78 oz78.8 g | 1.575×0.787×1.535 in 40.0×20.0×39.0 mm | — | Standard | Aluminum | Brushless | (add) | Titanium | 25 | Single Bearing | Digital | Counterclockwise | 180° | (add) | (add) | 500–2500 µs | 1500 µs | 4 µs | (add) | (add) | PWM | (add) | 6–9 V | (add) | (add) | -20–60°C-4.0–140.0°F | (add) | (add) | (add) | 300 mm11.81 in | China | 13.56 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | 0.026 A26 mA | — | — | ||
| Feetech | FT955B | Hobby | 8.4V 694.5 oz-in50.01 kg-cm4.9 N-m | 8.4V 0.12 s/60°504.2 deg/s84.0 RPM | (add) | 3.35 oz95.1 g | 1.721×0.878×1.567 in 43.7×22.3×39.8 mm | — | Large | (add) | Brushless | (add) | Steel | (add) | Dual Bearings | Digital | (add) | 180° | (add) | (add) | 500–2500 µs | (add) | (add) | (add) | (add) | PWM | (add) | 8.4 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | China | 10.79 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | — | ||
| Feetech | FT965B | Hobby | 8.4V 833.2 oz-in60.00 kg-cm5.9 N-m | 8.4V 0.15 s/60°402.7 deg/s67.1 RPM | (add) | 3.35 oz95.1 g | 1.721×0.878×1.567 in 43.7×22.3×39.8 mm | — | Large | (add) | Brushless | (add) | Steel | (add) | Dual Bearings | Digital | (add) | 180° | (add) | (add) | 500–2500 µs | (add) | (add) | (add) | (add) | PWM | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | China | 10.34 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Feetech | FT985M | Hobby |
8.4V 1,319.6 oz-in95.02 kg-cm9.3 N-m 7.4V 1,180.7 oz-in85.02 kg-cm8.3 N-m |
7.4V 0.26 s/60°228.1 deg/s38.0 RPM | ≤8 A≤8000 mA | 6.91 oz195.9 g | 2.323×1.142×2.165 in 59.0×29.0×55.0 mm | — | Giant | Aluminum | Cored | (add) | Steel | (add) | Dual Bearings | Digital | (add) | 180° | (add) | (add) | 500–2500 µs | (add) | (add) | (add) | (add) | PWM | (add) | 6–9 V | (add) | (add) | (add) | IP66 | (add) | (add) | (add) | China | 8.30 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | 0.026 A26 mA | — | — | ||
| Feetech | FT995M | Hobby |
8.4V 1,458.2 oz-in105.00 kg-cm10.3 N-m 7.4V 1,319.3 oz-in95.00 kg-cm9.3 N-m |
8.4V 0.25 s/60°240.0 deg/s40.0 RPM 7.4V 0.27 s/60°223.9 deg/s37.3 RPM |
9.5–10.5 A9500–10500 mA | 6.61 oz187.5 g | 2.559×1.181×1.89 in 65.0×30.0×48.0 mm | — | Giant | Aluminum | Cored | (add) | Steel | 15 | Dual Bearings | Digital | Counterclockwise | 180° | (add) | 20 ms | 500–2500 µs | 1500 µs | 4 µs | (add) | Potentiometer | PWM | (add) | 6–12 V | (add) | (add) | -20–60°C-4.0–140.0°F | (add) | RoHS | JR (Universal) | 300 mm11.81 in | China | 9.10–10.78 W | — | (add) | — | — | — | — | — | — | — | 0.800 A @ 8.4V800 mA @ 8.4V | Positional | 0.026 A26 mA | 0.500° | — | ||
| Feetech | FU8830 | Hobby |
7.4V 479.2 oz-in34.51 kg-cm3.4 N-m 6.0V 479.2 oz-in34.51 kg-cm3.4 N-m |
7.4V 0.08 s/60°722.9 deg/s120.5 RPM 6.0V 0.08 s/60°750.0 deg/s125.0 RPM |
(add) | 3.05 oz86.4 g | 1.575×0.787×1.535 in 40.0×20.0×39.0 mm | — | Standard | Aluminum | Brushless | (add) | Titanium | 25 | Single Bearing | Digital | (add) | 180° | (add) | (add) | 500–2500 µs | 1500 µs | 4 µs | (add) | (add) | CAN | (add) | 6–8.4 V | (add) | (add) | -20–60°C-4.0–140.0°F | IP66 | (add) | (add) | 300 mm11.81 in | China | 10.68–11.08 W | — | (add) | — | 241.000 | — | — | — | — | — | 0.420 A @ 7.4V420 mA @ 7.4V | (add) | 0.055 A55 mA | — | — | ||
Make: Feetech
Stall Current: 3–3.5 A3000–3500 mA
Shaft Power: 2.52–3.92 W
Weight: 2.61 oz74.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.575×0.787×1.693 in 40.0×20.0×43.0 mm
Case Material: Plastic / Aluminum
Motor Type: Cored
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: Counterclockwise
Op. Range: 180°
Mech. Limit: 220
Pulse Cycle: 20 ms
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 4 µs
Refresh Rate: (add)
Angle Sensor: Potentiometer
Control System: PWM
Programmable: (add)
Op. Voltage: 4–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: IP54
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: ≤3.9 A≤3900 mA
Shaft Power: 4.08 W
Weight: 2.61 oz74.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.575×0.787×1.693 in 40.0×20.0×43.0 mm
Case Material: Plastic / Aluminum
Motor Type: Cored
Motor Drive: (add)
Gear Material: Stainless Steel
Gear Spline/Teeth: 25
Rotation: Single Bearing
Modulation: Digital
Direction: Counterclockwise
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 4 µs
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: (add)
Op. Voltage: 4–8.4 V
Power Source: External
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: IP54
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: ≤4.5 A≤4500 mA
Shaft Power: 10.14 W
Weight: 2.15 oz61.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.579×0.791×1.532 in 40.1×20.1×38.9 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 4 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 5–9 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: 3–3.5 A3000–3500 mA
Shaft Power: 2.85–4.25 W
Weight: 2.36 oz67.0 g
Size Class: Standard
Diameter: —
Dimensions: 2.165×0.787×1.693 in 55.0×20.0×43.0 mm
Case Material: Nylon / Aluminum
Motor Type: Cored
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Single Bearing
Modulation: Digital
Direction: Counterclockwise
Op. Range: 360°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 4 µs
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: IP54
Certification: RoHS
Connector: JR
Wire Length: 300 mm11.81 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: 3.2–3.9 A3200–3900 mA
Shaft Power: 3.11–4.75 W
Weight: 2.36 oz67.0 g
Size Class: Standard
Diameter: —
Dimensions: 2.165×0.787×1.693 in 55.0×20.0×43.0 mm
Case Material: Plastic / Aluminum
Motor Type: Cored
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Single Bearing
Modulation: Digital
Direction: Counterclockwise
Op. Range: 360°
Mech. Limit: (add)
Pulse Cycle: 20 ms
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 4 µs
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: (add)
Op. Voltage: 6–7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: IP54
Certification: RoHS
Connector: JR
Wire Length: 300 mm11.81 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: ≤10.2 A≤10200 mA
Shaft Power: 7.35 W
Weight: 8.30 oz235.2 g
Size Class: Giant
Diameter: —
Dimensions: 2.559×1.181×2.299 in 65.0×30.0×58.4 mm
Case Material: Aluminum
Motor Type: Cored
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 15
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: 360°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: (add)
Op. Voltage: 4–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: ≤3.5 A≤3500 mA
Shaft Power: 3.11 W
Weight: 2.18 oz61.9 g
Size Class: Standard
Diameter: —
Dimensions: 1.581×0.794×1.577 in 40.2×20.2×40.1 mm
Case Material: Aluminum
Motor Type: Cored
Motor Drive: (add)
Gear Material: Copper
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: Counterclockwise
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 4 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–60°C14.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: 300 mm11.81 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: ≤3.4 A≤3400 mA
Shaft Power: —
Weight: 2.28 oz64.5 g
Size Class: Standard
Diameter: —
Dimensions: 1.581×0.794×1.577 in 40.2×20.2×40.1 mm
Case Material: Aluminum
Motor Type: Cored
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Single Bearing
Modulation: Digital
Direction: Counterclockwise
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 4 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: 300 mm11.81 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: (add)
Shaft Power: 5.23 W
Weight: 2.28 oz64.5 g
Size Class: Standard
Diameter: —
Dimensions: 1.581×0.794×1.577 in 40.2×20.2×40.1 mm
Case Material: Aluminum
Motor Type: Cored
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: (add)
Dead Band: 2 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: Waterproof
Certification: RoHS
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: 2.5–3.6 A2500–3600 mA
Shaft Power: 4.55–8.98 W
Weight: 2.28 oz64.5 g
Size Class: Standard
Diameter: —
Dimensions: 1.602×0.794×1.437 in 40.7×20.2×36.5 mm
Case Material: Aluminum
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Single Bearing
Modulation: Digital
Direction: Counterclockwise
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: 20 ms
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 4 µs
Refresh Rate: 50 Hz
Angle Sensor: Potentiometer
Control System: PWM
Programmable: (add)
Op. Voltage: 4–9 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–60°C14.0–140.0°F
Water Rating: IP54
Certification: RoHS
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: 275.000
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: (add)
Shaft Power: 3.67 W
Weight: 2.96 oz84.0 g
Size Class: Large
Diameter: —
Dimensions: 2.144×0.787×1.533 in 54.5×20.0×38.9 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: Counterclockwise
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6–7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: Waterproof
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: (add)
Shaft Power: 3.85 W
Weight: 2.96 oz84.0 g
Size Class: Large
Diameter: —
Dimensions: 2.144×0.787×1.533 in 54.5×20.0×38.9 mm
Case Material: Metal
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6–7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: Water Resistant
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: ≤4.2 A≤4200 mA
Shaft Power: 5.40 W
Weight: 2.96 oz84.0 g
Size Class: Large
Diameter: —
Dimensions: 2.142×0.787×1.535 in 54.4×20.0×39.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: Counterclockwise
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 4 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6–7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: 300 mm11.81 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: 3.5–4.2 A3500–4200 mA
Shaft Power: 3.70–5.71 W
Weight: 2.98 oz84.5 g
Size Class: Standard
Diameter: —
Dimensions: 2.144×0.787×1.533 in 54.5×20.0×38.9 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Single Bearing
Modulation: Digital
Direction: Counterclockwise
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 4 µs
Refresh Rate: 50 Hz
Angle Sensor: Potentiometer
Control System: PWM
Programmable: (add)
Op. Voltage: 6–7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: (add)
Certification: RoHS
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: 1.1–1.45 A1100–1450 mA
Shaft Power: 4.67 W
Weight: 3.23 oz91.5 g
Size Class: Standard
Diameter: —
Dimensions: 1.575×0.787×1.695 in 40.0×20.0×43.1 mm
Case Material: Aluminum
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Single Bearing
Modulation: Digital
Direction: Counterclockwise
Op. Range: 360°
Mech. Limit: (add)
Pulse Cycle: 20 ms
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 4 µs
Refresh Rate: 50 Hz
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: (add)
Op. Voltage: 4–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: 2.6–4.5 A2600–4500 mA
Shaft Power: 8.22 W
Weight: 2.72 oz77.2 g
Size Class: Standard
Diameter: —
Dimensions: 1.575×0.787×1.433 in 40.0×20.0×36.4 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: Counterclockwise
Op. Range: 180°
Mech. Limit: 200
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 4 µs
Refresh Rate: 330 Hz
Angle Sensor: (add)
Control System: PWM
Programmable: Yes
Op. Voltage: 4–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -15–70°C5.0–158.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: 3.5–4.4 A3500–4400 mA
Shaft Power: 4.51–6.80 W
Weight: 3.23 oz91.5 g
Size Class: Standard
Diameter: —
Dimensions: 1.575×0.787×1.496 in 40.0×20.0×38.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Single Bearing
Modulation: Digital
Direction: Counterclockwise
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 4 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: Yes
Op. Voltage: 4–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: Splashproof
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: China
Shape: —
Shaft Size: 5.9 mm
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: (add)
Shaft Power: 14.41 W
Weight: 2.54 oz72.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.575×0.787×1.433 in 40.0×20.0×36.4 mm
Case Material: Aluminum
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: Counterclockwise
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 4 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 5–9 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: 350 mm13.78 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: (add)
Shaft Power: 20.90 W
Weight: 2.96 oz84.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.575×0.787×1.571 in 40.0×20.0×39.9 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Single Bearing
Modulation: Digital
Direction: Counterclockwise
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 4 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6–9 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: 300 mm11.81 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: (add)
Shaft Power: 13.56 W
Weight: 2.78 oz78.8 g
Size Class: Standard
Diameter: —
Dimensions: 1.575×0.787×1.535 in 40.0×20.0×39.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Titanium
Gear Spline/Teeth: 25
Rotation: Single Bearing
Modulation: Digital
Direction: Counterclockwise
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 4 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6–9 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: 300 mm11.81 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: (add)
Shaft Power: 10.79 W
Weight: 3.35 oz95.1 g
Size Class: Large
Diameter: —
Dimensions: 1.721×0.878×1.567 in 43.7×22.3×39.8 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: (add)
Shaft Power: 10.34 W
Weight: 3.35 oz95.1 g
Size Class: Large
Diameter: —
Dimensions: 1.721×0.878×1.567 in 43.7×22.3×39.8 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: ≤8 A≤8000 mA
Shaft Power: 8.30 W
Weight: 6.91 oz195.9 g
Size Class: Giant
Diameter: —
Dimensions: 2.323×1.142×2.165 in 59.0×29.0×55.0 mm
Case Material: Aluminum
Motor Type: Cored
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6–9 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: IP66
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: 9.5–10.5 A9500–10500 mA
Shaft Power: 9.10–10.78 W
Weight: 6.61 oz187.5 g
Size Class: Giant
Diameter: —
Dimensions: 2.559×1.181×1.89 in 65.0×30.0×48.0 mm
Case Material: Aluminum
Motor Type: Cored
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 15
Rotation: Dual Bearings
Modulation: Digital
Direction: Counterclockwise
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: 20 ms
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 4 µs
Refresh Rate: (add)
Angle Sensor: Potentiometer
Control System: PWM
Programmable: (add)
Op. Voltage: 6–12 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: (add)
Certification: RoHS
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: (add)
Shaft Power: 10.68–11.08 W
Weight: 3.05 oz86.4 g
Size Class: Standard
Diameter: —
Dimensions: 1.575×0.787×1.535 in 40.0×20.0×39.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Titanium
Gear Spline/Teeth: 25
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 4 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: CAN
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: IP66
Certification: (add)
Connector: (add)
Wire Length: 300 mm11.81 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: 241.000
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Quick Tips
- Models with an asterisk (*) have been discontinued.
- Click on any servo model name to see more details about that product.
- Click on any brand name to filter all servos for that brand.
- In the desktop view, click on any column header to sort the table by that attribute. Click again to reverse the order.
Compare Prices for
Unable to load results. Please try again.