Discover XQ-Power Servos in Our eBay Store!
Shop NowSearch Matches (5,627)
Performance
Physical
Drivetrain
Control & Signal
Electrical & Environment
Connectivity
Origin
Preferences are saved automatically.
| Make | Model | Category | Torque | Speed | Stall Current |
Weight | Dimensions (L×W×H) |
Diameter | Size Class |
Case Material |
Motor Type |
Motor Drive |
Gear Material |
Gear Spline/ Teeth |
Rotation | Modulation | Direction | Op. Range |
Mech. Limit |
Pulse Cycle |
Pulse Width |
Neutral Pos. |
Dead Band |
Refresh Rate |
Angle Sensor |
Control System |
Programmable | Op. Voltage |
Power Source |
Regulator Type |
Temperature | Water Rating |
Certification | Connector | Wire Length |
Country of Origin |
Shaft Power |
Shape | Shaft Size |
Resolution | Gear Ratio |
Baud Rate |
Output Power |
Radial Load |
MCU | Operating Modes |
Running Current |
Rotation Mode |
Idle Current |
Backlash | Signal Voltage |
Compare | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| We may earn a commission from your purchase. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Turnigy | 620DMG+HS | Hobby | 6.0V 147.2 oz-in10.60 kg-cm1.0 N-m | 6.0V 0.13 s/60°461.5 deg/s76.9 RPM | (add) | 1.83 oz52.0 g | 1.59×0.79×1.65 in 40.5×20.0×42.0 mm | — | Standard | (add) | 3-pole | FET | Metal | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | 1520 µs | (add) | 250 Hz | (add) | (add) | (add) | 4.8–6 V | (add) | (add) | (add) | Waterproof | CE | JR (Universal) | (add) | (add) | 2.09 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | BLS950 * | Hobby |
6.0V 159.7 oz-in11.50 kg-cm1.1 N-m 4.8V 127.8 oz-in9.20 kg-cm0.9 N-m |
6.0V 0.12 s/60°500.0 deg/s83.3 RPM 4.8V 0.14 s/60°428.6 deg/s71.4 RPM |
(add) | 1.97 oz55.8 g | 1.58×0.79×1.58 in 40.0×20.0×40.0 mm | — | Standard | (add) | Brushless | (add) | Titanium | (add) | Dual Bearings | Digital | (add) | (add) | (add) | 8 ms | (add) | 1520 µs | 0.8 µs | 333 Hz | (add) | (add) | (add) | 4–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 1.69–2.46 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | BLS980 * | Hobby |
6.0V 43.1 oz-in3.10 kg-cm0.3 N-m 4.8V 34.7 oz-in2.50 kg-cm0.2 N-m |
6.0V 0.03 s/60°2,000.0 deg/s333.3 RPM 4.8V 0.04 s/60°1,500.0 deg/s250.0 RPM |
≤2.3 A≤2300 mA | 2.48 oz70.3 g | 1.58×0.79×1.58 in 40.0×20.0×40.0 mm | — | Standard | (add) | Brushless | (add) | Titanium | (add) | Dual Bearings | Digital | (add) | (add) | (add) | 4 ms | (add) | 760 µs | 4 µs | 560 Hz | (add) | PWM | (add) | 6–8.4 V | (add) | (add) | -10–60°C14.0–140.0°F | (add) | (add) | JR (Universal) | (add) | (add) | 1.60–2.65 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | BMS-380MAX * | Hobby |
6.0V 65.3 oz-in4.70 kg-cm0.5 N-m 4.8V 56.9 oz-in4.10 kg-cm0.4 N-m |
6.0V 0.14 s/60°428.6 deg/s71.4 RPM 4.8V 0.16 s/60°375.0 deg/s62.5 RPM |
≤0.65 A≤650 mA | 0.58 oz16.4 g | 1.02×0.51×1.22 in 26.0×13.0×31.0 mm | — | Mini | (add) | Brushed | (add) | Copper / Aluminum | 25 | Single Bearing | Analog | Clockwise | (add) | (add) | (add) | 1300–1700 µs | (add) | 8 µs | (add) | (add) | (add) | (add) | 3.6–6 V | (add) | (add) | -20–60°C-4.0–140.0°F | (add) | (add) | JR (Universal) | 160 mm6.30 in | (add) | 0.66–0.86 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | 0.005 A5 mA | — | — | ||
| Turnigy | BMS-380MG * | Hobby |
6.0V 58.3 oz-in4.20 kg-cm0.4 N-m 4.8V 50.0 oz-in3.60 kg-cm0.4 N-m |
6.0V 0.14 s/60°428.6 deg/s71.4 RPM 4.8V 0.15 s/60°400.0 deg/s66.7 RPM |
(add) | 0.58 oz16.3 g | 1.04×0.51×1.04 in 26.4×13.0×26.4 mm | — | Mini | (add) | (add) | (add) | Metal | (add) | Single Bearing | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.62–0.77 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | BMS-555MG * | Hobby |
6.0V 65.3 oz-in4.70 kg-cm0.5 N-m 4.8V 58.3 oz-in4.20 kg-cm0.4 N-m |
6.0V 0.13 s/60°461.5 deg/s76.9 RPM 4.8V 0.15 s/60°400.0 deg/s66.7 RPM |
(add) | 0.69 oz19.5 g | 1.18×0.39×1.34 in 30.0×10.0×34.0 mm | — | Slim | (add) | 3-pole | (add) | Metal | 25 | Dual Bearings | Analog | (add) | (add) | (add) | 8 ms | (add) | 1520 µs | (add) | 125 Hz | (add) | (add) | (add) | 4.5–6.5 V | (add) | (add) | (add) | (add) | CE | JR (Universal) | (add) | (add) | 0.72–0.93 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | DMC809 | Hobby |
6.0V 52.7 oz-in3.80 kg-cm0.4 N-m 4.8V 41.6 oz-in3.00 kg-cm0.3 N-m |
6.0V 0.07 s/60°857.1 deg/s142.9 RPM 4.8V 0.08 s/60°750.0 deg/s125.0 RPM |
(add) | 0.69 oz19.5 g | 1.24×0.47×1.26 in 31.5×12.0×32.1 mm | — | Micro | Aluminum | Coreless | (add) | Metal | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Potentiometer | PWM | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 190 mm7.48 in | (add) | 0.96–1.39 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | DS480 * | Hobby |
5.0V 26.8 oz-in1.93 kg-cm0.2 N-m 4.8V 25.7 oz-in1.85 kg-cm0.2 N-m |
5.0V 0.07 s/60°923.1 deg/s153.8 RPM 4.8V 0.07 s/60°882.4 deg/s147.1 RPM |
(add) | 0.34 oz9.5 g | 0.89×0.39×0.93 in 22.5×10.0×23.5 mm | — | Micro | (add) | Coreless | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | 1520 µs | 2 µs | 333 Hz | (add) | (add) | Yes | 4.8–5 V | (add) | (add) | -10–60°C14.0–140.0°F | (add) | (add) | JR (Universal) | 150 mm5.91 in | (add) | 0.70–0.76 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | 3-5V | ||
| Turnigy | HV-300 * | Hobby |
12.0V 533.3 oz-in38.40 kg-cm3.8 N-m 8.4V 373.6 oz-in26.90 kg-cm2.6 N-m |
12.0V 0.13 s/60°461.5 deg/s76.9 RPM 8.4V 0.18 s/60°333.3 deg/s55.6 RPM |
(add) | 2.79 oz79.0 g | 1.58×0.79×1.77 in 40.0×20.0×45.0 mm | — | Standard | (add) | Coreless | (add) | Titanium | (add) | Dual Bearings | Digital | (add) | 110° | (add) | 8 ms | 900–2100 µs | (add) | 1 µs | (add) | (add) | (add) | (add) | 8.4–12 V | (add) | (add) | -10–60°C14.0–140.0°F | (add) | (add) | JR (Universal) | 150 mm5.91 in | (add) | 3.84–7.58 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | HV-380 * | Hobby |
12.0V 144.4 oz-in10.40 kg-cm1.0 N-m 8.4V 101.4 oz-in7.30 kg-cm0.7 N-m |
12.0V 0.03 s/60°2,000.0 deg/s333.3 RPM 8.4V 0.04 s/60°1,500.0 deg/s250.0 RPM |
(add) | 2.79 oz79.0 g | 1.58×0.79×1.77 in 40.0×20.0×45.0 mm | — | Standard | (add) | Coreless | (add) | Titanium | (add) | Dual Bearings | Digital | (add) | (add) | (add) | 8 ms | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 12 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 4.69–8.90 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | HV-767 * | Hobby |
7.4V 430.5 oz-in31.00 kg-cm3.0 N-m 6.0V 347.2 oz-in25.00 kg-cm2.5 N-m |
7.4V 0.12 s/60°508.5 deg/s84.7 RPM 6.0V 0.15 s/60°413.8 deg/s69.0 RPM |
(add) | 2.75 oz77.9 g | 1.58×0.79×1.77 in 40.0×20.0×45.0 mm | — | Standard | (add) | Coreless | (add) | Titanium | (add) | Dual Bearings | Digital | (add) | (add) | (add) | 8 ms | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 4.43–6.75 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | MG-14WW | Hobby |
6.0V 52.7 oz-in3.80 kg-cm0.4 N-m 4.8V 38.9 oz-in2.80 kg-cm0.3 N-m |
6.0V 0.09 s/60°666.7 deg/s111.1 RPM 4.8V 0.11 s/60°545.5 deg/s90.9 RPM |
(add) | 0.49 oz14.0 g | 1.25×0.49×1.30 in 31.8×12.4×33.0 mm | — | Mini | (add) | Brushed | (add) | Metal | (add) | (add) | Analog | (add) | (add) | (add) | (add) | 900–2100 µs | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Waterproof | (add) | JR (Universal) | (add) | (add) | 0.65–1.08 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | MG90S | Hobby |
6.0V 30.5 oz-in2.20 kg-cm0.2 N-m 4.8V 25.0 oz-in1.80 kg-cm0.2 N-m |
6.0V 0.08 s/60°750.0 deg/s125.0 RPM 4.8V 0.10 s/60°600.0 deg/s100.0 RPM |
(add) | 0.63 oz18.0 g | 0.90×0.48×1.12 in 22.9×12.2×28.4 mm | — | Mini | (add) | Brushless | (add) | Metal | 10 | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 4.8–6 V | (add) | (add) | ≤55°C≤131.0°F | (add) | (add) | JR (Universal) | (add) | (add) | 0.46–0.71 W | — | (add) | — | — | — | — | — | — | — | 0.090 A @ 6.0V90 mA @ 6.0V | (add) | (add) | — | — | ||
| Turnigy | MX355WP | Hobby |
6.0V 166.6 oz-in11.99 kg-cm1.2 N-m 4.8V 138.8 oz-in9.99 kg-cm1.0 N-m |
6.0V 0.14 s/60°428.6 deg/s71.4 RPM 4.8V 0.16 s/60°375.0 deg/s62.5 RPM |
(add) | 1.52 oz43.0 g | 1.52×0.74×1.37 in 38.6×18.8×34.9 mm | — | Standard | (add) | Cored | (add) | Metal | (add) | Dual Bearings | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | (add) | Waterproof | (add) | JR (Universal) | (add) | (add) | 1.60–2.20 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | TG9 * | Hobby | 4.8V 22.2 oz-in1.60 kg-cm0.2 N-m | 4.8V 0.12 s/60°500.0 deg/s83.3 RPM | (add) | 0.32 oz9.0 g | 0.91×0.43×1.14 in 23.1×10.9×29.0 mm | — | Micro | Plastic | Coreless | (add) | Plastic | (add) | Bushing | Analog | (add) | 180° | 180 | (add) | (add) | (add) | (add) | (add) | Potentiometer | PWM | No | 3–6 V | Direct | Direct | -30–60°C-22.0–140.0°F | (add) | CE | JR (Universal) | 190 mm7.48 in | (add) | 0.34 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | — | ||
| Turnigy | TG9D | Hobby |
6.0V 25.0 oz-in1.80 kg-cm0.2 N-m 4.8V 22.2 oz-in1.60 kg-cm0.2 N-m |
6.0V 0.09 s/60°666.7 deg/s111.1 RPM 4.8V 0.10 s/60°600.0 deg/s100.0 RPM |
(add) | 0.32 oz9.0 g | 0.88×0.49×0.91 in 22.4×12.5×23.0 mm | — | Micro | Plastic | Brushed | (add) | Nylon | 21 | Bushing | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | -30–60°C-22.0–140.0°F | (add) | (add) | JR (Universal) | (add) | (add) | 0.41–0.51 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | TG9e * | Hobby | 4.8V 20.8 oz-in1.50 kg-cm0.1 N-m | 4.8V 0.10 s/60°600.0 deg/s100.0 RPM | (add) | 0.32 oz9.0 g | 0.91×0.48×1.14 in 23.1×12.2×29.0 mm | — | Mini | (add) | Brushed | (add) | Plastic | 20 | Bushing | Analog | (add) | (add) | (add) | (add) | (add) | (add) | 7 µs | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | ≤55°C≤131.0°F | (add) | (add) | JR (Universal) | 260 mm10.24 in | (add) | 0.38 W | — | (add) | — | — | — | — | — | — | Position | (add) | Positional | (add) | — | — | ||
| Turnigy | TG9W | Hobby |
6.0V 25.0 oz-in1.80 kg-cm0.2 N-m 4.8V 22.2 oz-in1.60 kg-cm0.2 N-m |
6.0V 0.09 s/60°666.7 deg/s111.1 RPM 4.8V 0.10 s/60°600.0 deg/s100.0 RPM |
0.55–0.7 A550–700 mA | 0.37 oz10.5 g | 0.88×0.49×0.90 in 22.4×12.5×22.8 mm | — | Micro | (add) | Brushed | (add) | Nylon | 21 | Bushing | Analog | (add) | 195° | (add) | (add) | 900–2100 µs | 1500 µs | 6 µs | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | (add) | Waterproof | (add) | JR (Universal) | 335 mm13.19 in | (add) | 0.41–0.51 W | — | (add) | — | — | — | — | — | — | — | 0.230 A @ 6.0V230 mA @ 6.0V | (add) | 0.020 A20 mA | — | — | ||
| Turnigy | TGY-0025 | Hobby |
6.0V 11.1 oz-in0.80 kg-cm0.1 N-m 4.8V 9.7 oz-in0.70 kg-cm0.1 N-m |
6.0V 0.07 s/60°857.1 deg/s142.9 RPM 4.8V 0.08 s/60°750.0 deg/s125.0 RPM |
(add) | 0.09 oz2.5 g | 0.77×0.32×0.64 in 19.6×8.2×16.3 mm | — | Nano | (add) | (add) | (add) | Plastic | 20 | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 180 mm7.09 in | (add) | 0.22–0.29 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | TGY-1370A | Hobby |
6.0V 8.3 oz-in0.60 kg-cm0.1 N-m 4.8V 5.6 oz-in0.40 kg-cm0.0 N-m |
6.0V 0.10 s/60°600.0 deg/s100.0 RPM 4.8V 0.12 s/60°500.0 deg/s83.3 RPM |
0.26–0.32 A260–320 mA | 0.13 oz3.7 g | 0.79×0.32×0.69 in 20.0×8.0×17.6 mm | — | Micro | (add) | Coreless | (add) | Plastic | 20 | Bushing | Analog | Counterclockwise | 90° | 180 | (add) | 800–2200 µs | 1500 µs | 7 µs | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | -10–50°C14.0–122.0°F | (add) | (add) | JR (Universal) | 100 mm3.94 in | (add) | 0.09–0.15 W | — | (add) | — | — | — | — | — | — | — | 0.120 A @ 6.0V120 mA @ 6.0V | (add) | 0.005 A5 mA | — | — | ||
| Turnigy | TGY-1440A * | Hobby |
6.0V 11.1 oz-in0.80 kg-cm0.1 N-m 4.8V 8.3 oz-in0.60 kg-cm0.1 N-m |
6.0V 0.10 s/60°600.0 deg/s100.0 RPM 4.8V 0.12 s/60°500.0 deg/s83.3 RPM |
≤0.32 A≤320 mA | 0.16 oz4.4 g | 0.79×0.77×0.32 in 20.1×19.6×8.0 mm | — | Micro | (add) | Coreless | (add) | Plastic | 20 | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | (add) | 3.7–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 102 mm4.02 in | (add) | 0.13–0.21 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | 0.110 A110 mA | — | — | |||
| Turnigy | TGY-1501MG | Hobby |
6.0V 236.1 oz-in17.00 kg-cm1.7 N-m 4.8V 215.3 oz-in15.50 kg-cm1.5 N-m |
6.0V 0.14 s/60°428.6 deg/s71.4 RPM 4.8V 0.16 s/60°375.0 deg/s62.5 RPM |
(add) | 2.22 oz63.0 g | 1.60×0.81×1.56 in 40.7×20.5×39.5 mm | — | Standard | (add) | Brushed | (add) | Metal | 25 | Dual Bearings | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | No | 4.8–6 V | (add) | (add) | (add) | Splashproof | (add) | JR (Universal) | (add) | (add) | 2.49–3.12 W | — | (add) | — | — | — | — | — | — | Position | (add) | Positional | (add) | — | — | ||
| Turnigy | TGY-1551A | Hobby |
6.0V 192.8 oz-in13.88 kg-cm1.4 N-m 4.8V 154.1 oz-in11.10 kg-cm1.1 N-m |
6.0V 0.08 s/60°750.0 deg/s125.0 RPM 4.8V 0.10 s/60°600.0 deg/s100.0 RPM |
(add) | 0.18 oz5.0 g | 0.85×0.43×0.71 in 21.6×10.9×18.0 mm | — | Micro | (add) | Coreless | (add) | Plastic | 24 | (add) | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 2.85–4.46 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | TGY-1600A * | Hobby | 6.0V 16.7 oz-in1.20 kg-cm0.1 N-m | 6.0V 0.10 s/60°600.0 deg/s100.0 RPM | (add) | 0.21 oz6.0 g | 0.87×0.46×0.90 in 22.0×11.7×22.8 mm | — | Micro | (add) | (add) | (add) | Plastic | (add) | Bushing | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.31 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | TGY-1601A | Hobby |
6.0V 22.0 oz-in1.58 kg-cm0.2 N-m 4.8V 18.3 oz-in1.32 kg-cm0.1 N-m |
6.0V 0.09 s/60°666.7 deg/s111.1 RPM 4.8V 0.11 s/60°545.5 deg/s90.9 RPM |
(add) | 0.21 oz6.0 g | 0.85×0.45×0.79 in 21.6×11.4×20.1 mm | — | Micro | (add) | Coreless | (add) | Plastic | 24 | (add) | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.31–0.45 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
Make: Turnigy
Stall Current: (add)
Shaft Power: 2.09 W
Weight: 1.83 oz52.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.79×1.65 in 40.5×20.0×42.0 mm
Case Material: (add)
Motor Type: 3-pole
Motor Drive: FET
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 250 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: Waterproof
Certification: CE
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: (add)
Shaft Power: 1.69–2.46 W
Weight: 1.97 oz55.8 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.79×1.58 in 40.0×20.0×40.0 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Titanium
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: 8 ms
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: 0.8 µs
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: ≤2.3 A≤2300 mA
Shaft Power: 1.60–2.65 W
Weight: 2.48 oz70.3 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.79×1.58 in 40.0×20.0×40.0 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Titanium
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: 4 ms
Pulse Width: (add)
Neutral Pos.: 760 µs
Dead Band: 4 µs
Refresh Rate: 560 Hz
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–60°C14.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: ≤0.65 A≤650 mA
Shaft Power: 0.66–0.86 W
Weight: 0.58 oz16.4 g
Size Class: Mini
Diameter: —
Dimensions: 1.02×0.51×1.22 in 26.0×13.0×31.0 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Copper / Aluminum
Gear Spline/Teeth: 25
Rotation: Single Bearing
Modulation: Analog
Direction: Clockwise
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 1300–1700 µs
Neutral Pos.: (add)
Dead Band: 8 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 3.6–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 160 mm6.30 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: (add)
Shaft Power: 0.62–0.77 W
Weight: 0.58 oz16.3 g
Size Class: Mini
Diameter: —
Dimensions: 1.04×0.51×1.04 in 26.4×13.0×26.4 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Single Bearing
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: (add)
Shaft Power: 0.72–0.93 W
Weight: 0.69 oz19.5 g
Size Class: Slim
Diameter: —
Dimensions: 1.18×0.39×1.34 in 30.0×10.0×34.0 mm
Case Material: (add)
Motor Type: 3-pole
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: 8 ms
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 125 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.5–6.5 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: CE
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: (add)
Shaft Power: 0.96–1.39 W
Weight: 0.69 oz19.5 g
Size Class: Micro
Diameter: —
Dimensions: 1.24×0.47×1.26 in 31.5×12.0×32.1 mm
Case Material: Aluminum
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Potentiometer
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 190 mm7.48 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: (add)
Shaft Power: 0.70–0.76 W
Weight: 0.34 oz9.5 g
Size Class: Micro
Diameter: —
Dimensions: 0.89×0.39×0.93 in 22.5×10.0×23.5 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: 2 µs
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: Yes
Op. Voltage: 4.8–5 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–60°C14.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 150 mm5.91 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: (add)
Shaft Power: 3.84–7.58 W
Weight: 2.79 oz79.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.79×1.77 in 40.0×20.0×45.0 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Titanium
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 110°
Mech. Limit: (add)
Pulse Cycle: 8 ms
Pulse Width: 900–2100 µs
Neutral Pos.: (add)
Dead Band: 1 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 8.4–12 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–60°C14.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 150 mm5.91 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: (add)
Shaft Power: 4.69–8.90 W
Weight: 2.79 oz79.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.79×1.77 in 40.0×20.0×45.0 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Titanium
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: 8 ms
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 12 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: (add)
Shaft Power: 4.43–6.75 W
Weight: 2.75 oz77.9 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.79×1.77 in 40.0×20.0×45.0 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Titanium
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: 8 ms
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: (add)
Shaft Power: 0.65–1.08 W
Weight: 0.49 oz14.0 g
Size Class: Mini
Diameter: —
Dimensions: 1.25×0.49×1.30 in 31.8×12.4×33.0 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 900–2100 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: Waterproof
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: (add)
Shaft Power: 0.46–0.71 W
Weight: 0.63 oz18.0 g
Size Class: Mini
Diameter: —
Dimensions: 0.90×0.48×1.12 in 22.9×12.2×28.4 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 10
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: ≤55°C≤131.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: (add)
Shaft Power: 1.60–2.20 W
Weight: 1.52 oz43.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.52×0.74×1.37 in 38.6×18.8×34.9 mm
Case Material: (add)
Motor Type: Cored
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: Waterproof
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: (add)
Shaft Power: 0.34 W
Weight: 0.32 oz9.0 g
Size Class: Micro
Diameter: —
Dimensions: 0.91×0.43×1.14 in 23.1×10.9×29.0 mm
Case Material: Plastic
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: (add)
Rotation: Bushing
Modulation: Analog
Direction: (add)
Op. Range: 180°
Mech. Limit: 180
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Potentiometer
Control System: PWM
Programmable: No
Op. Voltage: 3–6 V
Power Source: Direct
Regulator Type: Direct
Temperature: -30–60°C-22.0–140.0°F
Water Rating: (add)
Certification: CE
Connector: JR (Universal)
Wire Length: 190 mm7.48 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: (add)
Shaft Power: 0.41–0.51 W
Weight: 0.32 oz9.0 g
Size Class: Micro
Diameter: —
Dimensions: 0.88×0.49×0.91 in 22.4×12.5×23.0 mm
Case Material: Plastic
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Nylon
Gear Spline/Teeth: 21
Rotation: Bushing
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: -30–60°C-22.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: (add)
Shaft Power: 0.38 W
Weight: 0.32 oz9.0 g
Size Class: Mini
Diameter: —
Dimensions: 0.91×0.48×1.14 in 23.1×12.2×29.0 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 20
Rotation: Bushing
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: 7 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: ≤55°C≤131.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 260 mm10.24 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: Position
Make: Turnigy
Stall Current: 0.55–0.7 A550–700 mA
Shaft Power: 0.41–0.51 W
Weight: 0.37 oz10.5 g
Size Class: Micro
Diameter: —
Dimensions: 0.88×0.49×0.90 in 22.4×12.5×22.8 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Nylon
Gear Spline/Teeth: 21
Rotation: Bushing
Modulation: Analog
Direction: (add)
Op. Range: 195°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 900–2100 µs
Neutral Pos.: 1500 µs
Dead Band: 6 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: Waterproof
Certification: (add)
Connector: JR (Universal)
Wire Length: 335 mm13.19 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: (add)
Shaft Power: 0.22–0.29 W
Weight: 0.09 oz2.5 g
Size Class: Nano
Diameter: —
Dimensions: 0.77×0.32×0.64 in 19.6×8.2×16.3 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 20
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 180 mm7.09 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: 0.26–0.32 A260–320 mA
Shaft Power: 0.09–0.15 W
Weight: 0.13 oz3.7 g
Size Class: Micro
Diameter: —
Dimensions: 0.79×0.32×0.69 in 20.0×8.0×17.6 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 20
Rotation: Bushing
Modulation: Analog
Direction: Counterclockwise
Op. Range: 90°
Mech. Limit: 180
Pulse Cycle: (add)
Pulse Width: 800–2200 µs
Neutral Pos.: 1500 µs
Dead Band: 7 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–50°C14.0–122.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 100 mm3.94 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: ≤0.32 A≤320 mA
Shaft Power: 0.13–0.21 W
Weight: 0.16 oz4.4 g
Size Class: Micro
Diameter: —
Dimensions: 0.79×0.77×0.32 in 20.1×19.6×8.0 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 20
Rotation: Bushing
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 3.7–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 102 mm4.02 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: (add)
Shaft Power: 2.49–3.12 W
Weight: 2.22 oz63.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.60×0.81×1.56 in 40.7×20.5×39.5 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: No
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: Splashproof
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: Position
Make: Turnigy
Stall Current: (add)
Shaft Power: 2.85–4.46 W
Weight: 0.18 oz5.0 g
Size Class: Micro
Diameter: —
Dimensions: 0.85×0.43×0.71 in 21.6×10.9×18.0 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 24
Rotation: (add)
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: (add)
Shaft Power: 0.31 W
Weight: 0.21 oz6.0 g
Size Class: Micro
Diameter: —
Dimensions: 0.87×0.46×0.90 in 22.0×11.7×22.8 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: (add)
Rotation: Bushing
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: (add)
Shaft Power: 0.31–0.45 W
Weight: 0.21 oz6.0 g
Size Class: Micro
Diameter: —
Dimensions: 0.85×0.45×0.79 in 21.6×11.4×20.1 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 24
Rotation: (add)
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Quick Tips
- Models with an asterisk (*) have been discontinued.
- Click on any servo model name to see more details about that product.
- Click on any brand name to filter all servos for that brand.
- In the desktop view, click on any column header to sort the table by that attribute. Click again to reverse the order.
Compare Prices for
Unable to load results. Please try again.