Discover XQ-Power Servos in Our eBay Store!
Shop Now
Technical Specifications
Last Updated: 2026-11-05
Weight
Dimensions
Torque
Speed
Current
Temp
Wire
| Identity | |
| Brand |  |
| Product Number | TGY-1370A |
| Category | Hobby |
| Performance | |
| Torque |
6.0V
8.33 oz-in
0.60 kg-cm
0.1 N-m
4.8V
5.56 oz-in
0.40 kg-cm
0.0 N-m
Bottom 10%
|
| Speed |
6.0V
0.10 sec/60°
600.0 deg/s
100.0 RPM
4.8V
0.12 sec/60°
500.0 deg/s
83.3 RPM
Below Average
|
| Running Current |
6.0V
0.120 A
120 mA
4.8V
0.110 A
110 mA
|
| Stall Current | 0.26–0.32 A260–320 mAAbove Average |
| Physical | |
| Weight | 0.13 oz3.7 gAverage |
| Dimensions |
L 0.787 in W 0.315 in H 0.693 in L 20.0 mm W 8.0 mm H 17.6 mm |
| Drivetrain | |
| Motor Type | Coreless |
| Gears | Plastic |
| Gear Spline/Teeth | 20 T |
| Rotation/Support | Bushing |
| Control & Signal | |
| Modulation | Analog |
| Direction | Counterclockwise |
| Rotational Range | 90° |
| Mechanical Limit | 180° |
| Pulse Width | 800-2200 µs |
| Neutral Position | 1500 µs |
| Dead Band | 7 µs |
| Control System | PWM |
| Electrical & Environment | |
| Operating Voltage | 4.8–6 V |
| Temperature | -10–50 °C14–122 °F |
| Idle Current | 0.005 A5 mA |
| Connectivity | |
| Connector | JR (Universal) |
| Wire Length | 100 mm3.94 in |
Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.
Class Comparison
| Torque | Bottom 10% Stronger than 7% of 29 Analog Nano servos at 4.8V |
| Speed | Below Average Faster than 32% of 29 Analog Nano servos at 4.8V |
| Weight | Average Lighter than 53% of 67 Analog Nano servos |
| Stall Current | Above Average Lower draw than 66% of 51 Nano servos |
Performance Analysis
| Shaft Power | 0.09–0.15 W |
| Power Density | 0.896 W/in³ More power-dense than 52% of 66 Analog Nano servos |
| Torque Density | 1.5027 oz-in/g Stronger than 7% of 29 Analog Nano servos |
| Torque-to-Volume Ratio | 32.36 oz-in/in³ Denser torque than 7% of 29 Analog Nano servos |
| Speed-to-Weight | 2.25225 (1/sec·g) Faster than 64% of 29 Analog Nano servos |
| Speed-Torque Trade-off | 0.67 Better balanced than 4% of 29 Analog Nano servos |
| Current-per-Torque Ratio | 0.0576 A/oz-in More efficient than 7% of 707 Hobby servos |
| Idle-to-Running Current Ratio | 0.045 Lower idle draw than 52% of 333 Hobby servos |
| No-Load vs Stall Current Spread | 2.91 Narrower current spread than 91% of 350 Hobby servos |
| Torque Gain per Volt | 41.52%/V 1st-highest torque gain per volt of 23 Turnigy servos |
| Speed Gain per Volt | 16.67%/V More voltage-responsive (speed) than 76% of 22 Turnigy servos |
| Voltage Range Width | 1.2 V Wider voltage range than 40% of 41 Analog Nano servos |
| Dead-Band-to-Pulse-Width Ratio | 0.0050 Finer dead band than 10% of 40 Nano servos |
Similar Active Servos
Reviews (1)
Includes 1 review aggregated from around the web.
There are very few reviews for this servo on the web. One hobbyist who used it as a lightweight actuator for a small multirotor parachute release praised the very low cost of about 3 dollars and reported that, after a couple of months of testing, it had held up despite concern about the cheap servo being damaged by spring pressure on the lid. No other owner reports were found.
Be the first to review!