Discover XQ-Power Servos in Our eBay Store!
Shop NowSearch Matches (5,627)
Performance
Physical
Drivetrain
Control & Signal
Electrical & Environment
Connectivity
Origin
Preferences are saved automatically.
| Make | Model | Category | Torque | Speed | Stall Current |
Weight | Dimensions (L×W×H) |
Diameter | Size Class |
Case Material |
Motor Type |
Motor Drive |
Gear Material |
Gear Spline/ Teeth |
Rotation | Modulation | Direction | Op. Range |
Mech. Limit |
Pulse Cycle |
Pulse Width |
Neutral Pos. |
Dead Band |
Refresh Rate |
Angle Sensor |
Control System |
Programmable | Op. Voltage |
Power Source |
Regulator Type |
Temperature | Water Rating |
Certification | Connector | Wire Length |
Country of Origin |
Shaft Power |
Shape | Shaft Size |
Resolution | Gear Ratio |
Baud Rate |
Output Power |
Radial Load |
MCU | Operating Modes |
Running Current |
Rotation Mode |
Idle Current |
Backlash | Signal Voltage |
Compare | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| We may earn a commission from your purchase. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| MayTech | MT-DS006 * | Hobby | 6.0V 180.5 oz-in13.00 kg-cm1.3 N-m | 6.0V 0.07 s/60°857.1 deg/s142.9 RPM | (add) | 1.98 oz56.0 g | 1.61×0.79×1.50 in 40.8×20.1×38.0 mm | — | Standard | (add) | (add) | (add) | Metal | (add) | Single Bearing | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 4.77 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| MayTech | MT-DS007 * | Hobby | 6.0V 208.3 oz-in15.00 kg-cm1.5 N-m | 6.0V 0.07 s/60°857.1 deg/s142.9 RPM | (add) | 1.98 oz56.0 g | 1.61×0.79×1.50 in 40.8×20.1×38.0 mm | — | Standard | (add) | (add) | (add) | Metal | (add) | Single Bearing | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 5.50 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| MayTech | MT-DS008 * | Hobby | 4.8V 34.7 oz-in2.50 kg-cm0.2 N-m | 4.8V 0.15 s/60°400.0 deg/s66.7 RPM | (add) | 0.42 oz12.0 g | 0.87×0.45×0.97 in 22.2×11.3×24.5 mm | — | Micro | (add) | (add) | (add) | Metal | (add) | Single Bearing | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 0.43 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| MayTech | MT-DS009 * | Hobby | 4.8V 27.8 oz-in2.00 kg-cm0.2 N-m | 4.8V 0.08 s/60°750.0 deg/s125.0 RPM | (add) | 0.92 oz26.0 g | 1.40×0.59×0.59 in 35.5×15.0×15.0 mm | — | Low Profile | (add) | (add) | (add) | Plastic | (add) | Single Bearing | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 0.64 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| MayTech | MT-DS010 * | Hobby |
6.0V 31.9 oz-in2.30 kg-cm0.2 N-m 4.8V 27.8 oz-in2.00 kg-cm0.2 N-m |
6.0V 0.06 s/60°1,000.0 deg/s166.7 RPM 4.8V 0.07 s/60°857.1 deg/s142.9 RPM |
(add) | 0.42 oz12.0 g | 0.87×0.45×0.97 in 22.0×11.4×24.5 mm | — | Micro | (add) | (add) | (add) | Metal | (add) | Single Bearing | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 0.73–0.98 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| MayTech | MT-DS011 * | Hobby |
6.0V 27.8 oz-in2.00 kg-cm0.2 N-m 4.8V 25.0 oz-in1.80 kg-cm0.2 N-m |
6.0V 0.10 s/60°600.0 deg/s100.0 RPM 4.8V 0.12 s/60°500.0 deg/s83.3 RPM |
(add) | 0.42 oz12.0 g | 0.87×0.45×0.97 in 22.0×11.4×24.5 mm | — | Micro | (add) | (add) | (add) | Metal | (add) | Single Bearing | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 0.39–0.51 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| MayTech | MT-DS012 * | Hobby |
6.0V 100.0 oz-in7.20 kg-cm0.7 N-m 4.8V 91.7 oz-in6.60 kg-cm0.6 N-m |
6.0V 0.13 s/60°461.5 deg/s76.9 RPM 4.8V 0.14 s/60°428.6 deg/s71.4 RPM |
(add) | 1.94 oz55.0 g | 1.58×0.79×1.52 in 40.0×20.0×38.5 mm | — | Standard | (add) | (add) | (add) | Metal | (add) | Single Bearing | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 1.21–1.42 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| MayTech | MT-DS013 * | Hobby |
6.0V 119.4 oz-in8.60 kg-cm0.8 N-m 4.8V 111.1 oz-in8.00 kg-cm0.8 N-m |
6.0V 0.12 s/60°500.0 deg/s83.3 RPM 4.8V 0.14 s/60°428.6 deg/s71.4 RPM |
(add) | 1.94 oz55.0 g | 1.59×0.79×1.46 in 40.5×20.0×37.0 mm | — | Standard | (add) | (add) | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 1.47–1.84 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| MayTech | MT-DS014 * | Hobby |
6.0V 152.8 oz-in11.00 kg-cm1.1 N-m 4.8V 138.9 oz-in10.00 kg-cm1.0 N-m |
6.0V 0.09 s/60°666.7 deg/s111.1 RPM 4.8V 0.11 s/60°545.5 deg/s90.9 RPM |
(add) | 1.94 oz55.0 g | 1.59×0.79×1.46 in 40.5×20.0×37.0 mm | — | Standard | (add) | (add) | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 2.33–3.14 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| MayTech | MT-DS015 * | Hobby |
7.4V 159.7 oz-in11.50 kg-cm1.1 N-m 6.0V 145.8 oz-in10.50 kg-cm1.0 N-m |
7.4V 0.07 s/60°857.1 deg/s142.9 RPM 6.0V 0.09 s/60°666.7 deg/s111.1 RPM |
(add) | 1.94 oz55.0 g | 1.59×0.79×1.46 in 40.5×20.0×37.0 mm | — | Standard | (add) | (add) | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 3.00–4.22 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Maytech | MT-DS35M | Hobby | 8.4V 486.1 oz-in35.00 kg-cm3.4 N-m | 8.4V 0.07 s/60°857.1 deg/s142.9 RPM | (add) | 2.82 oz80.0 g | 1.58×0.79×1.60 in 40.1×20.1×40.6 mm | — | Standard | Aluminum | Brushless | (add) | Metal | (add) | (add) | Digital | (add) | 180° | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 6–8.4 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | China | 12.84 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Megatech | FX200 * | Hobby | 4.8V 24.0 oz-in1.73 kg-cm0.2 N-m | 4.8V 0.16 s/60°375.0 deg/s62.5 RPM | (add) | 0.32 oz9.1 g | 0.95×0.35×0.94 in 24.1×8.9×23.9 mm | — | Slim | (add) | Brushed | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 0.28 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Megatech | FX202 * | Hobby | 4.8V 11.9 oz-in0.86 kg-cm0.1 N-m | 4.8V 0.16 s/60°375.0 deg/s62.5 RPM | (add) | 0.32 oz9.1 g | 0.95×0.35×0.94 in 24.1×8.9×23.9 mm | — | Slim | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 0.14 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Megatech | FX203 * | Hobby | 4.8V 9.7 oz-in0.70 kg-cm0.1 N-m | 4.8V 0.11 s/60°545.5 deg/s90.9 RPM | (add) | 0.34 oz9.6 g | 0.87×0.44×0.87 in 22.1×11.2×22.1 mm | — | Micro | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 0.16 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Megatech | FX205 * | Hobby | 4.8V 53.9 oz-in3.88 kg-cm0.4 N-m | 4.8V 0.22 s/60°272.7 deg/s45.5 RPM | (add) | 1.60 oz45.3 g | 1.60×0.70×1.50 in 40.6×17.8×38.1 mm | — | Standard | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 0.45 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Megatech | FX220MG * | Hobby | 4.8V 165.0 oz-in11.88 kg-cm1.2 N-m | 4.8V 0.15 s/60°400.0 deg/s66.7 RPM | (add) | 1.97 oz55.9 g | 1.60×0.70×1.50 in 40.6×17.8×38.1 mm | — | Standard | (add) | (add) | (add) | Metal | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 2.03 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Metric Hobby | BLS1509H | Hobby | (add) | (add) | (add) | (add) | (add) | — | Unknown | Aluminum / Plastic | Brushless | (add) | Stainless steel | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | — | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Metric Hobby | BLS1511 | Hobby | (add) | (add) | (add) | (add) | (add) | — | Unknown | Aluminum / Plastic | Brushless | (add) | Stainless steel | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | — | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Metric Hobby | BLS2014H | Hobby |
7.4V 313.8 oz-in22.60 kg-cm2.2 N-m 6.6V 277.8 oz-in20.00 kg-cm2.0 N-m 6.0V 316.6 oz-in22.80 kg-cm2.2 N-m |
7.4V 0.12 s/60°500.0 deg/s83.3 RPM 6.6V 0.13 s/60°461.5 deg/s76.9 RPM 6.0V 0.15 s/60°413.8 deg/s69.0 RPM |
(add) | 2.62 oz74.3 g | (add) | — | Unknown | Aluminum | Brushless | (add) | Stainless steel | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 3.95–4.84 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Metric Hobby | BLS2512H | Hobby |
7.4V 325.0 oz-in23.40 kg-cm2.3 N-m 6.6V 347.3 oz-in25.01 kg-cm2.5 N-m 6.0V 318.1 oz-in22.91 kg-cm2.2 N-m |
7.4V 0.11 s/60°545.5 deg/s90.9 RPM 6.6V 0.14 s/60°428.6 deg/s71.4 RPM 6.0V 0.13 s/60°461.5 deg/s76.9 RPM |
(add) | 2.67 oz75.8 g | (add) | — | Unknown | Aluminum / Plastic | Brushless | (add) | Stainless steel | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Unknown | 4.52–5.46 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Metric Hobby | BLS3015H | Hobby |
7.4V 455.5 oz-in32.80 kg-cm3.2 N-m 6.6V 416.7 oz-in30.01 kg-cm2.9 N-m 6.0V 376.3 oz-in27.10 kg-cm2.7 N-m |
7.4V 0.14 s/60°428.6 deg/s71.4 RPM 6.6V 0.15 s/60°400.0 deg/s66.7 RPM 6.0V 0.17 s/60°363.6 deg/s60.6 RPM |
(add) | 2.71 oz76.7 g | (add) | — | Unknown | Aluminum / Plastic | Brushless | (add) | Stainless steel | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Unknown | 4.22–6.02 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Miuzei | 12G | Hobby |
6.0V 27.8 oz-in2.00 kg-cm0.2 N-m 4.8V 22.2 oz-in1.60 kg-cm0.2 N-m |
6.0V 0.10 s/60°600.0 deg/s100.0 RPM 4.8V 0.12 s/60°500.0 deg/s83.3 RPM |
(add) | 0.42 oz12.0 g | 0.91×0.45×0.94 in 23.1×11.4×23.9 mm | — | Micro | Plastic | Brushed | (add) | Metal | (add) | (add) | Digital | (add) | 180° | (add) | (add) | 500–2500 µs | 1500 µs | (add) | (add) | (add) | PWM | No | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | — | Boxed | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | — | ||
| Miuzei | 14KG | Hobby |
8.4V 229.1 oz-in16.50 kg-cm1.6 N-m 4.8V 177.8 oz-in12.80 kg-cm1.3 N-m |
8.4V 0.06 s/60°1,000.0 deg/s166.7 RPM 4.8V 0.10 s/60°600.0 deg/s100.0 RPM |
(add) | 1.76 oz50.0 g | 1.57×0.79×1.12 in 39.9×20.1×28.4 mm | — | Low Profile | Aluminum | Coreless | (add) | Aluminum | 25 | Dual Bearings | Digital | (add) | 180° | (add) | 3.03 ms | 500–2500 µs | 1500 µs | 3 µs | 330 Hz | (add) | PWM | No | 4.8–8.4 V | (add) | (add) | (add) | IP66 | (add) | JR (Universal) | 300 mm11.81 in | (add) | — | Boxed | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Miuzei | 21G | Hobby | 6.0V 59.7 oz-in4.30 kg-cm0.4 N-m |
6.0V 0.08 s/60°750.0 deg/s125.0 RPM 4.8V 0.10 s/60°600.0 deg/s100.0 RPM |
(add) | 0.71 oz20.0 g | (add) | — | Micro | Plastic | Cored | (add) | Copper | 25 | Dual Bearings | Digital | (add) | 180° | (add) | (add) | 500–2500 µs | 1500 µs | (add) | (add) | (add) | PWM | No | 4.8–6 V | (add) | (add) | (add) | Waterproof | (add) | JR (Universal) | (add) | China | 1.38 W | Boxed | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Miuzei | 25KG | Hobby |
8.4V 395.8 oz-in28.50 kg-cm2.8 N-m 6.8V 361.1 oz-in26.00 kg-cm2.5 N-m 4.8V 312.5 oz-in22.50 kg-cm2.2 N-m |
8.4V 0.13 s/60°461.5 deg/s76.9 RPM 6.8V 0.14 s/60°428.6 deg/s71.4 RPM 4.8V 0.16 s/60°375.0 deg/s62.5 RPM |
(add) | 2.12 oz60.0 g | 1.57×0.81×1.59 in 39.9×20.6×40.4 mm | — | Standard | Aluminum | Brushed | (add) | Metal | 25 | Dual Bearings | Digital | (add) | 180° | (add) | (add) | 500–2500 µs | 1500 µs | 3 µs | (add) | (add) | PWM | No | 4.8–8.4 V | (add) | (add) | (add) | IP66 | (add) | JR (Universal) | 310 mm12.20 in | (add) | 3.61–5.63 W | Boxed | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | — | ||
Make: MayTech
Stall Current: (add)
Shaft Power: 4.77 W
Weight: 1.98 oz56.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.61×0.79×1.50 in 40.8×20.1×38.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: MayTech
Stall Current: (add)
Shaft Power: 5.50 W
Weight: 1.98 oz56.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.61×0.79×1.50 in 40.8×20.1×38.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: MayTech
Stall Current: (add)
Shaft Power: 0.43 W
Weight: 0.42 oz12.0 g
Size Class: Micro
Diameter: —
Dimensions: 0.87×0.45×0.97 in 22.2×11.3×24.5 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: MayTech
Stall Current: (add)
Shaft Power: 0.64 W
Weight: 0.92 oz26.0 g
Size Class: Low Profile
Diameter: —
Dimensions: 1.40×0.59×0.59 in 35.5×15.0×15.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: (add)
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: MayTech
Stall Current: (add)
Shaft Power: 0.73–0.98 W
Weight: 0.42 oz12.0 g
Size Class: Micro
Diameter: —
Dimensions: 0.87×0.45×0.97 in 22.0×11.4×24.5 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: MayTech
Stall Current: (add)
Shaft Power: 0.39–0.51 W
Weight: 0.42 oz12.0 g
Size Class: Micro
Diameter: —
Dimensions: 0.87×0.45×0.97 in 22.0×11.4×24.5 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: MayTech
Stall Current: (add)
Shaft Power: 1.21–1.42 W
Weight: 1.94 oz55.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.79×1.52 in 40.0×20.0×38.5 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: MayTech
Stall Current: (add)
Shaft Power: 1.47–1.84 W
Weight: 1.94 oz55.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.79×1.46 in 40.5×20.0×37.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: MayTech
Stall Current: (add)
Shaft Power: 2.33–3.14 W
Weight: 1.94 oz55.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.79×1.46 in 40.5×20.0×37.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: MayTech
Stall Current: (add)
Shaft Power: 3.00–4.22 W
Weight: 1.94 oz55.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.79×1.46 in 40.5×20.0×37.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Maytech
Stall Current: (add)
Shaft Power: 12.84 W
Weight: 2.82 oz80.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.79×1.60 in 40.1×20.1×40.6 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Megatech
Stall Current: (add)
Shaft Power: 0.28 W
Weight: 0.32 oz9.1 g
Size Class: Slim
Diameter: —
Dimensions: 0.95×0.35×0.94 in 24.1×8.9×23.9 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: (add)
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Megatech
Stall Current: (add)
Shaft Power: 0.14 W
Weight: 0.32 oz9.1 g
Size Class: Slim
Diameter: —
Dimensions: 0.95×0.35×0.94 in 24.1×8.9×23.9 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: (add)
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Megatech
Stall Current: (add)
Shaft Power: 0.16 W
Weight: 0.34 oz9.6 g
Size Class: Micro
Diameter: —
Dimensions: 0.87×0.44×0.87 in 22.1×11.2×22.1 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: (add)
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Megatech
Stall Current: (add)
Shaft Power: 0.45 W
Weight: 1.60 oz45.3 g
Size Class: Standard
Diameter: —
Dimensions: 1.60×0.70×1.50 in 40.6×17.8×38.1 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: (add)
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Megatech
Stall Current: (add)
Shaft Power: 2.03 W
Weight: 1.97 oz55.9 g
Size Class: Standard
Diameter: —
Dimensions: 1.60×0.70×1.50 in 40.6×17.8×38.1 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Metric Hobby
Stall Current: (add)
Shaft Power: —
Weight: (add)
Size Class: Unknown
Diameter: —
Dimensions: (add)
Case Material: Aluminum / Plastic
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Stainless steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Metric Hobby
Stall Current: (add)
Shaft Power: —
Weight: (add)
Size Class: Unknown
Diameter: —
Dimensions: (add)
Case Material: Aluminum / Plastic
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Stainless steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Metric Hobby
Stall Current: (add)
Shaft Power: 3.95–4.84 W
Weight: 2.62 oz74.3 g
Size Class: Unknown
Diameter: —
Dimensions: (add)
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Stainless steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Metric Hobby
Stall Current: (add)
Shaft Power: 4.52–5.46 W
Weight: 2.67 oz75.8 g
Size Class: Unknown
Diameter: —
Dimensions: (add)
Case Material: Aluminum / Plastic
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Stainless steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: Unknown
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Metric Hobby
Stall Current: (add)
Shaft Power: 4.22–6.02 W
Weight: 2.71 oz76.7 g
Size Class: Unknown
Diameter: —
Dimensions: (add)
Case Material: Aluminum / Plastic
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Stainless steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: Unknown
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Miuzei
Stall Current: (add)
Shaft Power: —
Weight: 0.42 oz12.0 g
Size Class: Micro
Diameter: —
Dimensions: 0.91×0.45×0.94 in 23.1×11.4×23.9 mm
Case Material: Plastic
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: No
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Miuzei
Stall Current: (add)
Shaft Power: —
Weight: 1.76 oz50.0 g
Size Class: Low Profile
Diameter: —
Dimensions: 1.57×0.79×1.12 in 39.9×20.1×28.4 mm
Case Material: Aluminum
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Aluminum
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: 3.03 ms
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 3 µs
Refresh Rate: 330 Hz
Angle Sensor: (add)
Control System: PWM
Programmable: No
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: IP66
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Miuzei
Stall Current: (add)
Shaft Power: 1.38 W
Weight: 0.71 oz20.0 g
Size Class: Micro
Diameter: —
Dimensions: (add)
Case Material: Plastic
Motor Type: Cored
Motor Drive: (add)
Gear Material: Copper
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: No
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: Waterproof
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: China
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Miuzei
Stall Current: (add)
Shaft Power: 3.61–5.63 W
Weight: 2.12 oz60.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.81×1.59 in 39.9×20.6×40.4 mm
Case Material: Aluminum
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 3 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: No
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: IP66
Certification: (add)
Connector: JR (Universal)
Wire Length: 310 mm12.20 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Quick Tips
- Models with an asterisk (*) have been discontinued.
- Click on any servo model name to see more details about that product.
- Click on any brand name to filter all servos for that brand.
- In the desktop view, click on any column header to sort the table by that attribute. Click again to reverse the order.
Compare Prices for
Unable to load results. Please try again.