Discover XQ-Power Servos in Our eBay Store!
Shop Now
Technical Specifications
Last Updated: 2026-07-10
|
Identity
Performance
Physical
Drivetrain
Control & Signal
Electrical & Environment
Connectivity
Origin
Preferences are saved automatically.
Weight
Dimensions
Torque
Speed
Current
Temp
Wire
| Identity | |
| Brand |  |
| Product Number | MTC 220 |
| Category | Hobby |
| Discontinued | Yes |
| Performance | |
| Torque |
4.8V165.00 oz-in11.88 kg-cm1.2 N-m |
| Speed |
4.8V0.15 sec/60°400.0 deg/s66.7 RPM |
| Running Current | (add) |
| Stall Current | (add) |
| Shaft Power | 2.03 W |
| Physical | |
| Weight | 1.97 oz55.9 g |
| Dimensions |
L 1.60 in W 0.70 in H 1.50 in L 40.6 mm W 17.8 mm H 38.1 mm |
| Case Material | (add) |
| Drivetrain | |
| Motor Type | (add) |
| Motor Drive | (add) |
| Gears | Metal |
| Gear Spline/Teeth | (add) |
| Rotation Mode | (add) |
| Rotation/Support | (add) |
| Backlash | (add) |
| Control & Signal | |
| Modulation | (add) |
| Direction | (add) |
| Rotational Range | (add) |
| Mechanical Limit | (add) |
| Pulse Cycle | (add) |
| Pulse Width | (add) |
| Neutral Position | (add) |
| Dead Band | (add) |
| Refresh Rate | (add) |
| Angle Sensor | (add) |
| Control System | (add) |
| Programmable | (add) |
| Signal Voltage | (add) |
| Electrical & Environment | |
| Operating Voltage | (add) |
| Power Source | (add) |
| Regulator Type | (add) |
| Temperature | (add) |
| Water Rating | (add) |
| Certification | (add) |
| Idle Current | (add) |
| Connectivity | |
| Connector | (add) |
| Wire Length | (add) |
| Origin | |
| Country of Origin | (add) |
Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.
Quick Actions
Similar Active Servos
Reviews (1)
-
tom
December 2, 2015Application(s): rudder and elevator on 46-55 size corsair.
Comments: This tested ok with servo tester ,but when connected to receiver ,it seems to have two stages of movement not smooth movement. I'm no expert so may be something else going on, but other servos work on same receiver same channel,same transmitter ???