Discover XQ-Power Servos in Our eBay Store!
Shop NowTurnigy Servos (53)
Performance
Physical
Drivetrain
Control & Signal
Electrical & Environment
Connectivity
Origin
Preferences are saved automatically.
| Make | Model | Category | Torque | Speed | Stall Current |
Weight | Dimensions (L×W×H) |
Diameter | Size Class |
Case Material |
Motor Type |
Motor Drive |
Gear Material |
Gear Spline/ Teeth |
Rotation | Modulation | Direction | Op. Range |
Mech. Limit |
Pulse Cycle |
Pulse Width |
Neutral Pos. |
Dead Band |
Refresh Rate |
Angle Sensor |
Control System |
Programmable | Op. Voltage |
Power Source |
Regulator Type |
Temperature | Water Rating |
Certification | Connector | Wire Length |
Country of Origin |
Shaft Power |
Shape | Shaft Size |
Resolution | Gear Ratio |
Baud Rate |
Output Power |
Radial Load |
MCU | Operating Modes |
Running Current |
Rotation Mode |
Idle Current |
Backlash | Signal Voltage |
Compare | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| We may earn a commission from your purchase. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Turnigy | TGY-2216MG * | Hobby | 4.8V 43.1 oz-in3.10 kg-cm0.3 N-m | 4.8V 0.16 s/60°375.0 deg/s62.5 RPM | (add) | 0.57 oz16.2 g | (add) | — | Unknown | (add) | (add) | (add) | Metal | (add) | Single Bearing | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 4.5–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.50 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | TGY-225MG | Hobby |
6.0V 48.6 oz-in3.50 kg-cm0.3 N-m 4.8V 41.6 oz-in3.00 kg-cm0.3 N-m |
6.0V 0.12 s/60°500.0 deg/s83.3 RPM 4.8V 0.14 s/60°428.6 deg/s71.4 RPM |
(add) | 0.92 oz26.0 g | 1.22×0.63×1.22 in 31.0×16.0×31.0 mm | — | Mini | (add) | Brushed | (add) | Metal | (add) | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | (add) | 6–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.55–0.75 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | TGY-375DMG * | Hobby |
6.0V 31.9 oz-in2.30 kg-cm0.2 N-m 4.8V 22.2 oz-in1.60 kg-cm0.2 N-m |
6.0V 0.11 s/60°545.5 deg/s90.9 RPM 4.8V 0.13 s/60°461.5 deg/s76.9 RPM |
(add) | 0.40 oz11.4 g | 0.96×0.45×0.91 in 24.5×11.5×23.0 mm | — | Micro | (add) | (add) | (add) | Metal | (add) | Single Bearing | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.32–0.54 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | TGY-390DMH | Hobby |
6.0V 75.0 oz-in5.40 kg-cm0.5 N-m 4.8V 63.9 oz-in4.60 kg-cm0.5 N-m |
6.0V 0.11 s/60°545.5 deg/s90.9 RPM 4.8V 0.14 s/60°428.6 deg/s71.4 RPM |
(add) | 0.79 oz22.5 g | 1.14×0.51×1.18 in 29.0×13.0×30.0 mm | — | Mini | (add) | Coreless | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | 3 ms | (add) | 1520 µs | (add) | 200 Hz | (add) | (add) | (add) | 4.8–6.6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.84–1.26 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | TGY-390V | Hobby |
7.2V 75.0 oz-in5.40 kg-cm0.5 N-m 6.0V 63.9 oz-in4.60 kg-cm0.5 N-m |
7.2V 0.11 s/60°545.5 deg/s90.9 RPM 6.0V 0.14 s/60°428.6 deg/s71.4 RPM |
(add) | 0.79 oz22.5 g | 1.14×0.51×1.18 in 29.0×13.0×30.0 mm | — | Mini | (add) | Coreless | (add) | Metal | (add) | Dual Bearings | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | (add) | 6–7.2 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.84–1.26 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | TGY-4409MD | Hobby |
6.0V 131.2 oz-in9.45 kg-cm0.9 N-m 4.8V 120.1 oz-in8.65 kg-cm0.8 N-m |
6.0V 0.11 s/60°545.5 deg/s90.9 RPM 4.8V 0.13 s/60°461.5 deg/s76.9 RPM |
(add) | 1.55 oz44.0 g | 1.61×0.80×1.16 in 41.0×20.3×29.5 mm | — | Low Profile | (add) | Brushless | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | 1520 µs | 2 µs | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 1.71–2.20 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | TGY-50090M | Hobby |
6.0V 27.8 oz-in2.00 kg-cm0.2 N-m 4.8V 22.2 oz-in1.60 kg-cm0.2 N-m |
6.0V 0.07 s/60°857.1 deg/s142.9 RPM 4.8V 0.08 s/60°750.0 deg/s125.0 RPM |
(add) | 0.32 oz9.0 g | 0.91×0.47×1.02 in 23.1×12.0×25.9 mm | — | Micro | (add) | Brushed | (add) | Metal | (add) | Bushing | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.51–0.73 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | TGY-811 | Hobby |
6.0V 150.3 oz-in10.82 kg-cm1.1 N-m 4.8V 121.0 oz-in8.71 kg-cm0.9 N-m |
6.0V 0.12 s/60°500.0 deg/s83.3 RPM 4.8V 0.15 s/60°400.0 deg/s66.7 RPM |
(add) | 1.06 oz30.0 g | 1.18×0.39×1.38 in 30.0×9.9×35.1 mm | — | Slim | (add) | Coreless | (add) | Metal | (add) | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 1.49–2.32 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | TGY-813 | Hobby |
6.0V 165.0 oz-in11.88 kg-cm1.2 N-m 4.8V 143.0 oz-in10.29 kg-cm1.0 N-m |
6.0V 0.09 s/60°666.7 deg/s111.1 RPM 4.8V 0.11 s/60°545.5 deg/s90.9 RPM |
(add) | 1.06 oz30.0 g | 1.18×0.39×1.38 in 30.0×10.0×35.0 mm | — | Slim | (add) | Coreless | (add) | Metal | (add) | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 2.40–3.39 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | TGY-9150MG * | Hobby | 4.8V 219.4 oz-in15.80 kg-cm1.5 N-m | 4.8V 0.17 s/60°352.9 deg/s58.8 RPM | (add) | 2.12 oz60.0 g | 1.58×0.79×1.46 in 40.0×20.0×37.0 mm | — | Standard | (add) | (add) | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 4.5–7.2 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 2.39 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | TGY-930 * | Hobby | 4.8V 50.0 oz-in3.60 kg-cm0.4 N-m | 6.0V 0.14 s/60°428.6 deg/s71.4 RPM | (add) | 0.92 oz26.0 g | 1.42×0.59×1.30 in 36.0×15.0×33.0 mm | — | Standard | (add) | (add) | FET | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 4.8–6 V | (add) | (add) | ≤55°C≤131.0°F | (add) | (add) | JR (Universal) | (add) | (add) | — | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | TGY-AN13 | Hobby |
6.0V 201.3 oz-in14.49 kg-cm1.4 N-m 4.8V 183.2 oz-in13.19 kg-cm1.3 N-m |
6.0V 0.13 s/60°461.5 deg/s76.9 RPM 4.8V 0.15 s/60°400.0 deg/s66.7 RPM |
(add) | 2.05 oz58.0 g | 1.57×0.79×1.48 in 40.0×20.0×37.5 mm | — | Standard | (add) | Brushless | (add) | Titanium | 25 | (add) | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 2.26–2.86 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | TGY-AN3 | Hobby |
6.0V 50.0 oz-in3.60 kg-cm0.4 N-m 4.8V 44.4 oz-in3.20 kg-cm0.3 N-m |
6.0V 0.13 s/60°461.5 deg/s76.9 RPM 4.8V 0.15 s/60°400.0 deg/s66.7 RPM |
(add) | 1.34 oz38.0 g | 1.57×0.79×1.46 in 40.0×20.0×37.0 mm | — | Standard | (add) | Brushed | (add) | Plastic | (add) | (add) | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.55–0.71 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | TGY-D56MG | Hobby |
6.0V 16.7 oz-in1.20 kg-cm0.1 N-m 4.8V 11.8 oz-in0.85 kg-cm0.1 N-m |
6.0V 0.10 s/60°600.0 deg/s100.0 RPM 4.8V 0.14 s/60°428.6 deg/s71.4 RPM |
(add) | 0.20 oz5.6 g | 0.78×0.32×0.83 in 19.8×8.2×21.2 mm | — | Micro | (add) | Coreless | (add) | Metal | (add) | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | (add) | 4.8–7.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.16–0.31 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | TGY-DS530 * | Hobby |
6.0V 41.7 oz-in3.00 kg-cm0.3 N-m 4.8V 40.0 oz-in2.88 kg-cm0.3 N-m |
6.0V 0.09 s/60°638.3 deg/s106.4 RPM 4.8V 0.10 s/60°612.2 deg/s102.0 RPM |
(add) | 0.46 oz13.0 g | 0.91×0.47×0.98 in 23.0×12.0×25.0 mm | — | Micro | (add) | Brushed | (add) | Hybrid | (add) | Dual Bearings | Digital | (add) | (add) | (add) | 2 ms | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.75–0.82 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | TGY-MG90S | Hobby |
6.0V 30.6 oz-in2.20 kg-cm0.2 N-m 4.8V 25.0 oz-in1.80 kg-cm0.2 N-m |
6.0V 0.08 s/60°750.0 deg/s125.0 RPM 4.8V 0.10 s/60°600.0 deg/s100.0 RPM |
(add) | 0.47 oz13.4 g | 0.90×0.48×1.12 in 22.8×12.2×28.5 mm | — | Mini | (add) | Coreless | (add) | Metal | 21 | Single Bearing | Digital | (add) | 60° | (add) | (add) | (add) | (add) | 1 µs | (add) | (add) | (add) | (add) | 4.8–6 V | (add) | (add) | ≤55°C≤131.0°F | (add) | (add) | JR (Universal) | 250 mm9.84 in | (add) | 0.46–0.71 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | TGY-MG930 * | Hobby |
6.0V 62.5 oz-in4.50 kg-cm0.4 N-m 4.8V 50.0 oz-in3.60 kg-cm0.4 N-m |
6.0V 0.11 s/60°545.5 deg/s90.9 RPM 4.8V 0.14 s/60°428.6 deg/s71.4 RPM |
(add) | 0.92 oz26.0 g | 1.42×0.60×1.13 in 36.0×15.2×28.7 mm | — | Mini | (add) | (add) | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.66–1.05 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | TGY-MG958 * | Hobby |
6.0V 200.0 oz-in14.40 kg-cm1.4 N-m 4.8V 166.0 oz-in11.95 kg-cm1.2 N-m |
4.8V 0.20 s/60°300.0 deg/s50.0 RPM | ≤1.6 A≤1600 mA | 2.29 oz65.0 g | 1.58×0.79×1.45 in 40.2×20.1×36.8 mm | — | Standard | (add) | Coreless | (add) | Metal | (add) | Dual Bearings | Digital | (add) | 45° | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 4.8–6.6 V | (add) | (add) | ≤55°C≤131.0°F | (add) | (add) | JR (Universal) | 320 mm12.60 in | (add) | 1.53 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | 10.000 A10,000 mA | — | — | ||
| Turnigy | TGY-MG959 * | Hobby |
6.0V 200.0 oz-in14.40 kg-cm1.4 N-m 4.8V 166.0 oz-in11.95 kg-cm1.2 N-m |
4.8V 0.20 s/60°300.0 deg/s50.0 RPM | (add) | 2.75 oz78.0 g | 1.58×0.79×1.45 in 40.2×20.1×36.8 mm | — | Standard | (add) | Coreless | (add) | Metal | 25 | Dual Bearings | Digital | (add) | 45° | (add) | (add) | (add) | 1520 µs | 1 µs | (add) | (add) | (add) | (add) | 4.8–6 V | (add) | (add) | -20–60°C-4.0–140.0°F | (add) | (add) | JR (Universal) | 320 mm12.60 in | (add) | 1.53 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | TGY-S3101S * | Hobby | 6.0V 34.7 oz-in2.50 kg-cm0.2 N-m | 6.0V 0.14 s/60°428.6 deg/s71.4 RPM | (add) | 0.60 oz17.0 g | 1.54×0.55×1.14 in 39.1×14.0×29.0 mm | — | Mini | (add) | (add) | (add) | Hybrid | (add) | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.46 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | |||
| Turnigy | TGY-S3317B * | Hobby | 6.0V 34.7 oz-in2.50 kg-cm0.2 N-m | 6.0V 0.14 s/60°428.6 deg/s71.4 RPM | (add) | 0.67 oz19.0 g | 1.65×0.59×1.10 in 41.9×15.0×27.9 mm | — | Standard | (add) | Brushed | (add) | Hybrid | (add) | Dual Bearings | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.46 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | TGY-S3317M * | Hobby | 6.0V 41.7 oz-in3.00 kg-cm0.3 N-m | 6.0V 0.14 s/60°428.6 deg/s71.4 RPM | (add) | 0.92 oz26.0 g | 1.65×0.59×1.10 in 41.9×15.0×27.9 mm | — | Standard | (add) | Brushed | (add) | Metal | (add) | Dual Bearings | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.55 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | TGY-S3317S * | Hobby | 6.0V 31.9 oz-in2.30 kg-cm0.2 N-m | 6.0V 0.14 s/60°428.6 deg/s71.4 RPM | ≤1 A≤1000 mA | 0.60 oz17.0 g | 1.65×0.59×1.10 in 41.9×15.0×27.9 mm | — | Standard | (add) | Brushed | (add) | Hybrid | 25 | Dual Bearings | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | -20–65°C-4.0–149.0°F | (add) | (add) | JR (Universal) | 200 mm7.87 in | (add) | 0.42 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | 0.007 A7 mA | — | — | ||
| Turnigy | TGY-S8166M * | Hobby | 6.0V 458.3 oz-in33.00 kg-cm3.2 N-m | 6.0V 0.21 s/60°285.7 deg/s47.6 RPM | ≤3.8 A≤3800 mA | 5.43 oz154.0 g | 2.95×1.06×2.32 in 74.9×26.9×58.9 mm | — | Giant | (add) | (add) | (add) | Metal | (add) | Dual Bearings | Analog | (add) | 60° | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | (add) | 6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 4.04 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | TGY-WP23 | Hobby |
6.0V 319.2 oz-in22.99 kg-cm2.3 N-m 4.8V 249.8 oz-in17.99 kg-cm1.8 N-m |
6.0V 0.12 s/60°500.0 deg/s83.3 RPM 4.8V 0.14 s/60°428.6 deg/s71.4 RPM |
(add) | 0.85 oz24.0 g | 1.60×0.81×1.52 in 40.7×20.5×38.5 mm | — | Standard | (add) | Coreless | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | 1500 µs | (add) | (add) | (add) | PWM | (add) | 4.8–6.6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 3.30–4.92 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
Make: Turnigy
Stall Current: (add)
Shaft Power: 0.50 W
Weight: 0.57 oz16.2 g
Size Class: Unknown
Diameter: —
Dimensions: (add)
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.5–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: (add)
Shaft Power: 0.55–0.75 W
Weight: 0.92 oz26.0 g
Size Class: Mini
Diameter: —
Dimensions: 1.22×0.63×1.22 in 31.0×16.0×31.0 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: (add)
Shaft Power: 0.32–0.54 W
Weight: 0.40 oz11.4 g
Size Class: Micro
Diameter: —
Dimensions: 0.96×0.45×0.91 in 24.5×11.5×23.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: (add)
Shaft Power: 0.84–1.26 W
Weight: 0.79 oz22.5 g
Size Class: Mini
Diameter: —
Dimensions: 1.14×0.51×1.18 in 29.0×13.0×30.0 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: 3 ms
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 200 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–6.6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: (add)
Shaft Power: 0.84–1.26 W
Weight: 0.79 oz22.5 g
Size Class: Mini
Diameter: —
Dimensions: 1.14×0.51×1.18 in 29.0×13.0×30.0 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6–7.2 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: (add)
Shaft Power: 1.71–2.20 W
Weight: 1.55 oz44.0 g
Size Class: Low Profile
Diameter: —
Dimensions: 1.61×0.80×1.16 in 41.0×20.3×29.5 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: 2 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: (add)
Shaft Power: 0.51–0.73 W
Weight: 0.32 oz9.0 g
Size Class: Micro
Diameter: —
Dimensions: 0.91×0.47×1.02 in 23.1×12.0×25.9 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Bushing
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: (add)
Shaft Power: 1.49–2.32 W
Weight: 1.06 oz30.0 g
Size Class: Slim
Diameter: —
Dimensions: 1.18×0.39×1.38 in 30.0×9.9×35.1 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: (add)
Shaft Power: 2.40–3.39 W
Weight: 1.06 oz30.0 g
Size Class: Slim
Diameter: —
Dimensions: 1.18×0.39×1.38 in 30.0×10.0×35.0 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: (add)
Shaft Power: 2.39 W
Weight: 2.12 oz60.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.79×1.46 in 40.0×20.0×37.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.5–7.2 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: (add)
Shaft Power: —
Weight: 0.92 oz26.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.42×0.59×1.30 in 36.0×15.0×33.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: FET
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: ≤55°C≤131.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: (add)
Shaft Power: 2.26–2.86 W
Weight: 2.05 oz58.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.48 in 40.0×20.0×37.5 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Titanium
Gear Spline/Teeth: 25
Rotation: (add)
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: (add)
Shaft Power: 0.55–0.71 W
Weight: 1.34 oz38.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.46 in 40.0×20.0×37.0 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: (add)
Shaft Power: 0.16–0.31 W
Weight: 0.20 oz5.6 g
Size Class: Micro
Diameter: —
Dimensions: 0.78×0.32×0.83 in 19.8×8.2×21.2 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: (add)
Shaft Power: 0.75–0.82 W
Weight: 0.46 oz13.0 g
Size Class: Micro
Diameter: —
Dimensions: 0.91×0.47×0.98 in 23.0×12.0×25.0 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Hybrid
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: 2 ms
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: (add)
Shaft Power: 0.46–0.71 W
Weight: 0.47 oz13.4 g
Size Class: Mini
Diameter: —
Dimensions: 0.90×0.48×1.12 in 22.8×12.2×28.5 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 21
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: 60°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: 1 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: ≤55°C≤131.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 250 mm9.84 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: (add)
Shaft Power: 0.66–1.05 W
Weight: 0.92 oz26.0 g
Size Class: Mini
Diameter: —
Dimensions: 1.42×0.60×1.13 in 36.0×15.2×28.7 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: ≤1.6 A≤1600 mA
Shaft Power: 1.53 W
Weight: 2.29 oz65.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.79×1.45 in 40.2×20.1×36.8 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 45°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–6.6 V
Power Source: (add)
Regulator Type: (add)
Temperature: ≤55°C≤131.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 320 mm12.60 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: (add)
Shaft Power: 1.53 W
Weight: 2.75 oz78.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.79×1.45 in 40.2×20.1×36.8 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 45°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: 1 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 320 mm12.60 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: (add)
Shaft Power: 0.46 W
Weight: 0.60 oz17.0 g
Size Class: Mini
Diameter: —
Dimensions: 1.54×0.55×1.14 in 39.1×14.0×29.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Hybrid
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: (add)
Shaft Power: 0.46 W
Weight: 0.67 oz19.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.65×0.59×1.10 in 41.9×15.0×27.9 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Hybrid
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: (add)
Shaft Power: 0.55 W
Weight: 0.92 oz26.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.65×0.59×1.10 in 41.9×15.0×27.9 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: ≤1 A≤1000 mA
Shaft Power: 0.42 W
Weight: 0.60 oz17.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.65×0.59×1.10 in 41.9×15.0×27.9 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Hybrid
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–65°C-4.0–149.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 200 mm7.87 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: ≤3.8 A≤3800 mA
Shaft Power: 4.04 W
Weight: 5.43 oz154.0 g
Size Class: Giant
Diameter: —
Dimensions: 2.95×1.06×2.32 in 74.9×26.9×58.9 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: 60°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: (add)
Shaft Power: 3.30–4.92 W
Weight: 0.85 oz24.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.60×0.81×1.52 in 40.7×20.5×38.5 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6.6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Quick Tips
- Models with an asterisk (*) have been discontinued.
- Click on any servo model name to see more details about that product.
- Click on any brand name to filter all servos for that brand.
- In the desktop view, click on any column header to sort the table by that attribute. Click again to reverse the order.
Compare Prices for
Unable to load results. Please try again.