Discover XQ-Power Servos in Our eBay Store!

Henge Servos (9)

Units:

Weight

Dimensions

Torque

Speed

Current

Temp

Wire

	Make	Model	Category	Torque	Speed	Stall Current	Weight	Dimensions (L×W×H)	Diameter	Size Class	Case Material	Motor Type	Motor Drive	Gear Material	Gear Spline/ Teeth	Rotation	Modulation	Direction	Op. Range	Mech. Limit	Pulse Cycle	Pulse Width	Neutral Pos.	Dead Band	Refresh Rate	Angle Sensor	Control System	Programmable	Op. Voltage	Power Source	Regulator Type	Temperature	Water Rating	Certification	Connector	Wire Length	Country of Origin	Shaft Power	Shape	Shaft Size	Resolution	Gear Ratio	Baud Rate	Output Power	Radial Load	MCU	Operating Modes	Running Current	Rotation Mode	Idle Current	Backlash	Signal Voltage	Compare
We may earn a commission from your purchase.
	Henge	MD7200A	Hobby	6.0V 48.6 oz-in 4.5V 41.7 oz-in	6.0V 0.07 s/60° 4.5V 0.09 s/60°	(add)	0.67 oz	1.38×0.59×1.15 in	—	Mini	(add)	Coreless	(add)	Metal	(add)	(add)	Digital	(add)	130°	(add)	(add)	(add)	1520 µs	3 µs	333 Hz	(add)	(add)	(add)	4.5–6 V	(add)	(add)	(add)	(add)	(add)	(add)	210 mm	China	0.86–1.28 W	—	—	—	—	—	—	—	—	—	(add)	(add)	(add)	—	—	view
	Henge	MD752	Hobby	6.0V 87.5 oz-in 4.5V 70.8 oz-in	6.0V 0.11 s/60° 4.5V 0.13 s/60°	(add)	0.99 oz	1.38×0.59×1.15 in	—	Mini	(add)	Coreless	(add)	Metal	(add)	(add)	Digital	(add)	130°	(add)	(add)	(add)	1520 µs	3 µs	333 Hz	(add)	(add)	(add)	4.5–6 V	(add)	(add)	(add)	(add)	(add)	(add)	210 mm	China	1.01–1.47 W	—	—	—	—	—	—	—	—	—	(add)	(add)	(add)	—	—	view
	Henge	MD7932	Hobby	6.0V 57.0 oz-in 4.5V 48.6 oz-in	6.0V 0.07 s/60° 4.5V 0.09 s/60°	(add)	1.31 oz	1.38×0.59×1.15 in	—	Mini	(add)	Coreless	(add)	Metal	(add)	(add)	Digital	(add)	130°	(add)	(add)	(add)	1520 µs	3 µs	(add)	(add)	(add)	(add)	4.5–6 V	(add)	(add)	(add)	(add)	(add)	(add)	210 mm	China	1.00–1.50 W	—	—	—	—	—	—	—	—	—	(add)	(add)	(add)	—	—	view
	Henge	MD7952	Hobby	6.0V 94.5 oz-in 4.5V 77.8 oz-in	6.0V 0.11 s/60° 4.5V 0.13 s/60°	(add)	1.31 oz	1.38×0.59×1.15 in	—	Mini	(add)	Coreless	(add)	Metal	(add)	(add)	Digital	(add)	130°	(add)	(add)	(add)	1520 µs	3 µs	(add)	(add)	(add)	(add)	4.5–6 V	(add)	(add)	(add)	(add)	(add)	(add)	210 mm	China	1.11–1.59 W	—	—	—	—	—	—	—	—	—	(add)	(add)	(add)	—	—	view
	Henge	MD7952_L	Hobby	6.0V 165.3 oz-in 4.5V 136.1 oz-in	6.0V 0.19 s/60° 4.5V 0.21 s/60°	(add)	0.99 oz	1.38×0.59×1.15 in	—	Mini	(add)	Coreless	(add)	Metal	(add)	(add)	Digital	(add)	130°	(add)	(add)	(add)	1520 µs	3 µs	(add)	(add)	(add)	(add)	4.8–6 V	(add)	(add)	(add)	(add)	(add)	(add)	210 mm	China	1.20–1.61 W	—	—	—	—	—	—	—	—	—	(add)	(add)	(add)	—	—	view
	Henge	MD820	Hobby	6.0V 48.6 oz-in 4.5V 41.7 oz-in	6.0V 0.07 s/60° 4.5V 0.09 s/60°	(add)	0.60 oz	1.14×0.53×1.18 in	—	Mini	(add)	Coreless	(add)	Metal	(add)	(add)	Digital	(add)	130°	(add)	(add)	(add)	1520 µs	3 µs	(add)	(add)	(add)	(add)	4.8–6 V	(add)	(add)	(add)	(add)	(add)	(add)	210 mm	China	0.86–1.28 W	—	—	—	—	—	—	—	—	—	(add)	(add)	(add)	—	—	view
	Henge	MD922	Hobby	6.0V 25.0 oz-in 4.8V 22.2 oz-in	6.0V 0.07 s/60° 4.8V 0.09 s/60°	(add)	0.42 oz	0.89×0.45×0.97 in	—	Micro	(add)	(add)	(add)	Metal	(add)	Dual Bearings	Digital	(add)	(add)	(add)	3.6 ms	(add)	1520 µs	3 µs	(add)	(add)	PWM	(add)	4.5–6 V	(add)	(add)	-20–60°C	(add)	(add)	JR (Universal)	210 mm	(add)	0.46–0.66 W	—	—	—	—	—	—	—	—	—	(add)	(add)	5.000 A	—	—	view
	Henge	MD933	Hobby	6.0V 27.8 oz-in 4.8V 25.0 oz-in	6.0V 0.10 s/60° 4.8V 0.12 s/60°	(add)	0.42 oz	0.89×0.45×0.97 in	—	Micro	(add)	Brushed	(add)	Metal	(add)	Single Bearing	Digital	(add)	60°	(add)	4 ms	850–2150 µs	(add)	4 µs	(add)	(add)	PWM	(add)	4.5–6 V	(add)	(add)	-20–60°C	(add)	(add)	(add)	210 mm	(add)	0.39–0.51 W	—	—	—	—	—	—	—	—	—	(add)	(add)	5.000 A	—	—	view
	Henge	MS522	Hobby	6.0V 32.0 oz-in 4.5V 27.8 oz-in	6.0V 0.12 s/60° 4.5V 0.14 s/60°	≤600 A	0.46 oz	0.89×0.45×0.97 in	—	Micro	(add)	Coreless	(add)	Metal	(add)	Single Bearing	Analog	(add)	65°	(add)	(add)	(add)	(add)	5 µs	(add)	(add)	(add)	(add)	4.5–6 V	(add)	(add)	(add)	(add)	(add)	(add)	210 mm	China	0.37–0.49 W	—	—	—	—	—	—	—	—	—	(add)	(add)	5.000 A	—	—	view

Henge MD7200A

Make: Henge

Torque:

6.0V 48.6 oz-in

Speed:

6.0V 0.07 s/60°

Stall Current: (add)

Shaft Power: 0.86–1.28 W

Weight: 0.67 oz

We may earn a commission from your purchase.

Henge MD752

Make: Henge

Torque:

6.0V 87.5 oz-in

Speed:

6.0V 0.11 s/60°

Stall Current: (add)

Shaft Power: 1.01–1.47 W

Weight: 0.99 oz

We may earn a commission from your purchase.

Henge MD7932

Make: Henge

Torque:

6.0V 57.0 oz-in

Speed:

6.0V 0.07 s/60°

Stall Current: (add)

Shaft Power: 1.00–1.50 W

Weight: 1.31 oz

We may earn a commission from your purchase.

Henge MD7952

Make: Henge

Torque:

6.0V 94.5 oz-in

Speed:

6.0V 0.11 s/60°

Stall Current: (add)

Shaft Power: 1.11–1.59 W

Weight: 1.31 oz

We may earn a commission from your purchase.

Henge MD7952_L

Make: Henge

Torque:

6.0V 165.3 oz-in

Speed:

6.0V 0.19 s/60°

Stall Current: (add)

Shaft Power: 1.20–1.61 W

Weight: 0.99 oz

We may earn a commission from your purchase.

Henge MD820

Make: Henge

Torque:

6.0V 48.6 oz-in

Speed:

6.0V 0.07 s/60°

Stall Current: (add)

Shaft Power: 0.86–1.28 W

Weight: 0.60 oz

We may earn a commission from your purchase.

Henge MD922

Make: Henge

Torque:

6.0V 25.0 oz-in

Speed:

6.0V 0.07 s/60°

Stall Current: (add)

Shaft Power: 0.46–0.66 W

Weight: 0.42 oz

We may earn a commission from your purchase.

Henge MD933

Make: Henge

Torque:

6.0V 27.8 oz-in

Speed:

6.0V 0.10 s/60°

Stall Current: (add)

Shaft Power: 0.39–0.51 W

Weight: 0.42 oz

We may earn a commission from your purchase.

Henge MS522

Make: Henge

Torque:

6.0V 32.0 oz-in

Speed:

6.0V 0.12 s/60°

Stall Current: ≤600 A

Shaft Power: 0.37–0.49 W

Weight: 0.46 oz

We may earn a commission from your purchase.

Quick Tips

Models with an asterisk (*) have been discontinued.
Click on any servo model name to see more details about that product.
Click on any brand name to filter all servos for that brand.
In the desktop view, click on any column header to sort the table by that attribute. Click again to reverse the order.

Henge Servos (9)

Quick Tips

Compare Prices for