Discover XQ-Power Servos in Our eBay Store!
Shop NowGraupner Servos (159)
Performance
Physical
Drivetrain
Control & Signal
Electrical & Environment
Connectivity
Origin
Preferences are saved automatically.
| Make | Model | Category | Torque | Speed | Stall Current |
Weight | Dimensions (L×W×H) |
Diameter | Size Class |
Case Material |
Motor Type |
Motor Drive |
Gear Material |
Gear Spline/ Teeth |
Rotation | Modulation | Direction | Op. Range |
Mech. Limit |
Pulse Cycle |
Pulse Width |
Neutral Pos. |
Dead Band |
Refresh Rate |
Angle Sensor |
Control System |
Programmable | Op. Voltage |
Power Source |
Regulator Type |
Temperature | Water Rating |
Certification | Connector | Wire Length |
Country of Origin |
Shaft Power |
Shape | Shaft Size |
Resolution | Gear Ratio |
Baud Rate |
Output Power |
Radial Load |
MCU | Operating Modes |
Running Current |
Rotation Mode |
Idle Current |
Backlash | Signal Voltage |
Compare | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| We may earn a commission from your purchase. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Graupner | DS 8077 * | Hobby | 4.8V 47.0 oz-in3.38 kg-cm0.3 N-m | 4.8V 0.14 s/60°428.6 deg/s71.4 RPM | (add) | 1.38 oz39.1 g | 1.52×0.75×1.46 in 38.6×19.0×37.1 mm | — | Standard | (add) | (add) | (add) | Plastic | 23 | Single Bearing | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.62 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | DS 8081 * | Hobby | 4.8V 79.0 oz-in5.69 kg-cm0.6 N-m | 4.8V 0.12 s/60°500.0 deg/s83.3 RPM | (add) | 1.45 oz41.1 g | 1.50×0.75×1.57 in 38.1×19.0×39.9 mm | — | Standard | (add) | (add) | (add) | Carbon | 23 | Single Bearing | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 1.22 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | DS 8086 * | Hobby |
6.0V 99.1 oz-in7.14 kg-cm0.7 N-m 4.8V 79.3 oz-in5.71 kg-cm0.6 N-m |
6.0V 0.15 s/60°400.0 deg/s66.7 RPM 4.8V 0.18 s/60°333.3 deg/s55.6 RPM |
(add) | 1.59 oz45.0 g | 1.52×0.75×1.57 in 38.6×19.0×39.9 mm | — | Standard | (add) | (add) | (add) | Karbonite | 23 | Single Bearing | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.81–1.22 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | DS 8100 G * | Hobby | 4.8V 31.0 oz-in2.23 kg-cm0.2 N-m | 4.8V 0.05 s/60°1,200.0 deg/s200.0 RPM | (add) | 1.73 oz49.0 g | 1.54×0.75×1.57 in 39.1×19.0×39.9 mm | — | Standard | (add) | (add) | (add) | (add) | 23 | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 1.15 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | DS 8231 * | Hobby | 4.8V 104.0 oz-in7.49 kg-cm0.7 N-m | 4.8V 0.15 s/60°400.0 deg/s66.7 RPM | (add) | 1.69 oz47.9 g | 1.54×0.75×1.54 in 39.1×19.0×39.1 mm | — | Standard | (add) | (add) | (add) | Plastic | 23 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 1.28 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | DS 8311 * | Hobby | 4.8V 146.0 oz-in10.51 kg-cm1.0 N-m | 4.8V 0.13 s/60°461.5 deg/s76.9 RPM | (add) | 2.12 oz60.0 g | 1.54×0.75×1.54 in 39.1×19.0×39.1 mm | — | Standard | (add) | (add) | (add) | Metal | 23 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 2.08 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | DS 8341 BB * | Hobby |
6.0V 141.6 oz-in10.20 kg-cm1.0 N-m 4.8V 123.2 oz-in8.87 kg-cm0.9 N-m |
6.0V 0.08 s/60°800.0 deg/s133.3 RPM 4.8V 0.11 s/60°571.4 deg/s95.2 RPM |
(add) | 1.73 oz49.0 g | 1.54×0.77×1.56 in 39.1×19.6×39.6 mm | — | Standard | (add) | (add) | (add) | Plastic | 23 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 2.17–3.49 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | DS 8411 * | Hobby | 4.8V 167.0 oz-in12.03 kg-cm1.2 N-m | 4.8V 0.11 s/60°545.5 deg/s90.9 RPM | (add) | 2.08 oz59.0 g | 1.54×0.75×1.54 in 39.1×19.0×39.1 mm | — | Standard | (add) | (add) | (add) | Metal | 23 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 2.81 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | DS 8417 * | Hobby | 4.8V 70.0 oz-in5.04 kg-cm0.5 N-m | 4.8V 0.06 s/60°1,000.0 deg/s166.7 RPM | (add) | 1.98 oz56.1 g | 1.54×0.75×1.54 in 39.1×19.0×39.1 mm | — | Standard | (add) | (add) | (add) | Metal | 23 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 2.16 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | DS 8418 * | Hobby | 6.0V 65.1 oz-in4.69 kg-cm0.5 N-m | 4.8V 0.08 s/60°750.0 deg/s125.0 RPM | (add) | 1.98 oz56.0 g | 1.54×0.75×1.54 in 39.0×19.0×39.0 mm | — | Unknown | (add) | (add) | (add) | Metal | 23 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | — | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | DS 8421 * | Hobby |
6.0V 126.0 oz-in9.07 kg-cm0.9 N-m 4.8V 113.3 oz-in8.16 kg-cm0.8 N-m |
6.0V 0.10 s/60°606.1 deg/s101.0 RPM 4.8V 0.12 s/60°500.0 deg/s83.3 RPM |
(add) | 1.52 oz43.0 g | 1.59×0.75×1.04 in 40.4×19.0×26.4 mm | — | Low Profile | (add) | (add) | (add) | Metal | 23 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 1.75–2.35 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | DS 8511 * | Hobby | 4.8V 208.4 oz-in15.00 kg-cm1.5 N-m | 4.8V 0.19 s/60°315.8 deg/s52.6 RPM | (add) | 2.08 oz59.0 g | 1.57×0.83×1.50 in 39.9×21.1×38.1 mm | — | Large | (add) | (add) | (add) | Metal | 23 | Dual Bearings | Digital | (add) | 90° | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 2.03 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | — | ||
| Graupner | DS 8700 G * | Hobby | 4.8V 56.0 oz-in4.03 kg-cm0.4 N-m | 4.8V 0.05 s/60°1,200.0 deg/s200.0 RPM | (add) | 2.19 oz62.1 g | 1.54×0.75×1.54 in 39.1×19.0×39.1 mm | — | Standard | (add) | (add) | (add) | Metal | 23 | Dual Bearings | Digital | (add) | (add) | (add) | 3 ms | (add) | 1520 µs | (add) | 333 Hz | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 2.07 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | DS 8811 * | Hobby | 4.8V 250.0 oz-in18.00 kg-cm1.8 N-m | 4.8V 0.13 s/60°461.5 deg/s76.9 RPM | (add) | 2.29 oz64.9 g | 1.57×0.83×1.57 in 39.9×21.1×39.9 mm | — | Standard | (add) | (add) | (add) | Metal | 23 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 3.56 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | DS 8822 * | Hobby |
6.0V 162.8 oz-in11.72 kg-cm1.1 N-m 4.8V 141.6 oz-in10.20 kg-cm1.0 N-m |
6.0V 0.08 s/60°800.0 deg/s133.3 RPM 4.8V 0.11 s/60°571.4 deg/s95.2 RPM |
(add) | 2.26 oz64.0 g | 1.59×0.83×1.57 in 40.4×21.1×39.9 mm | — | Standard | (add) | (add) | (add) | Metal | 23 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 2.49–4.01 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | DS 8900G * | Hobby |
6.0V 65.1 oz-in4.69 kg-cm0.5 N-m 4.8V 48.1 oz-in3.46 kg-cm0.3 N-m |
6.0V 0.05 s/60°1,333.3 deg/s222.2 RPM 4.8V 0.05 s/60°1,132.1 deg/s188.7 RPM |
(add) | 2.15 oz61.0 g | 1.59×0.83×1.57 in 40.4×21.1×39.9 mm | — | Standard | (add) | (add) | (add) | Plastic | 23 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 1.68–2.67 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | DS 8911 * | Hobby | 6.0V 351.2 oz-in25.29 kg-cm2.5 N-m | 6.0V 0.15 s/60°400.0 deg/s66.7 RPM | ≤2.3 A≤2300 mA | 2.43 oz69.0 g | 1.59×0.83×1.57 in 40.4×21.1×39.9 mm | — | Standard | (add) | Coreless | (add) | Metal | 23 | Dual Bearings | Digital | (add) | 90° | (add) | 3 ms | (add) | 1500 µs | (add) | 333 Hz | (add) | (add) | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 4.33 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | 0.014 A14 mA | — | — | ||
| Graupner | DS 8922 * | Hobby |
6.0V 354.0 oz-in25.49 kg-cm2.5 N-m 4.8V 320.0 oz-in23.04 kg-cm2.3 N-m |
6.0V 0.08 s/60°800.0 deg/s133.3 RPM 4.8V 0.09 s/60°666.7 deg/s111.1 RPM |
(add) | 2.36 oz67.0 g | 1.59×0.83×1.57 in 40.4×21.1×39.9 mm | — | Standard | (add) | Coreless | (add) | Metal | 23 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 6.57–8.73 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | DSR581 * | Hobby | 6.0V 113.0 oz-in8.14 kg-cm0.8 N-m | 6.0V 0.15 s/60°400.0 deg/s66.7 RPM | (add) | (add) | 1.50×0.75×1.58 in 38.0×19.0×40.0 mm | — | Standard | (add) | Coreless | (add) | (add) | 23 | Dual Bearings | Digital | (add) | 180° | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 1.39 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | DSR8801 * | Hobby |
6.0V 311.5 oz-in22.43 kg-cm2.2 N-m 4.8V 240.7 oz-in17.33 kg-cm1.7 N-m |
6.0V 0.17 s/60°363.6 deg/s60.6 RPM 4.8V 0.21 s/60°285.7 deg/s47.6 RPM |
(add) | 2.22 oz63.0 g | 1.59×0.83×1.48 in 40.4×21.1×37.6 mm | — | Standard | (add) | (add) | (add) | Metal | 23 | Single Bearing | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 2.12–3.49 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | HBM 660 BBMG | Hobby |
7.4V 120.8 oz-in8.70 kg-cm0.9 N-m 6.0V 100.0 oz-in7.20 kg-cm0.7 N-m 4.8V 80.6 oz-in5.80 kg-cm0.6 N-m |
7.4V 0.13 s/60°461.5 deg/s76.9 RPM 6.0V 0.16 s/60°375.0 deg/s62.5 RPM 4.8V 0.20 s/60°300.0 deg/s50.0 RPM |
(add) | 1.52 oz43.0 g | 1.38×0.63×1.38 in 35.0×16.0×35.0 mm | — | Standard | (add) | Brushless | (add) | Steel | 25 | Dual Bearings | Digital | (add) | (add) | (add) | 5 ms | (add) | 1520 µs | (add) | 200 Hz | (add) | PWM | (add) | 4.8–7.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.74–1.72 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | HBM 690 BBMG | Hobby |
7.4V 83.3 oz-in6.00 kg-cm0.6 N-m 6.0V 69.4 oz-in5.00 kg-cm0.5 N-m 4.8V 55.6 oz-in4.00 kg-cm0.4 N-m |
7.4V 0.08 s/60°750.0 deg/s125.0 RPM 6.0V 0.10 s/60°600.0 deg/s100.0 RPM 4.8V 0.12 s/60°500.0 deg/s83.3 RPM |
(add) | 1.52 oz43.0 g | 1.38×0.63×1.36 in 35.0×16.0×34.5 mm | — | Standard | Metal | Brushless | (add) | Steel | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | Yes | 4.8–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.86–1.93 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | HBS 660 BBMG | Hobby |
7.4V 120.8 oz-in8.70 kg-cm0.9 N-m 6.0V 100.0 oz-in7.20 kg-cm0.7 N-m 4.8V 80.6 oz-in5.80 kg-cm0.6 N-m |
7.4V 0.13 s/60°461.5 deg/s76.9 RPM 6.0V 0.16 s/60°375.0 deg/s62.5 RPM 4.8V 0.20 s/60°300.0 deg/s50.0 RPM |
(add) | 1.27 oz36.0 g | 1.38×0.63×1.36 in 35.0×16.0×34.5 mm | — | Mini | (add) | Brushless | (add) | Steel | (add) | Dual Bearings | Digital | (add) | (add) | (add) | 2500 ms | (add) | 1500 µs | (add) | (add) | (add) | PWM | (add) | 4.8–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.74–1.72 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | HBS 690 BB * | Hobby |
7.4V 83.3 oz-in6.00 kg-cm0.6 N-m 6.0V 69.4 oz-in5.00 kg-cm0.5 N-m 4.8V 55.6 oz-in4.00 kg-cm0.4 N-m |
7.4V 0.08 s/60°750.0 deg/s125.0 RPM 6.0V 0.10 s/60°600.0 deg/s100.0 RPM 4.8V 0.12 s/60°500.0 deg/s83.3 RPM |
(add) | 1.13 oz32.0 g | 1.38×0.63×1.38 in 35.0×16.0×35.0 mm | — | Standard | (add) | Brushless | (add) | Karbonite | (add) | Dual Bearings | Digital | (add) | 90° | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | Yes | 4.8–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.86–1.93 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | 0.037 A37 mA | — | — | ||
| Graupner | HBS 760 BB | Hobby |
7.4V 145.8 oz-in10.50 kg-cm1.0 N-m 6.0V 127.8 oz-in9.20 kg-cm0.9 N-m 4.8V 97.2 oz-in7.00 kg-cm0.7 N-m |
7.4V 0.08 s/60°750.0 deg/s125.0 RPM 6.0V 0.10 s/60°600.0 deg/s100.0 RPM 4.8V 0.12 s/60°500.0 deg/s83.3 RPM |
(add) | 1.83 oz52.0 g | 1.57×0.77×1.56 in 40.0×19.5×39.5 mm | — | Standard | (add) | Brushless | (add) | Karbonite | (add) | Dual Bearings | Digital | (add) | 90° | (add) | (add) | (add) | 1500 µs | (add) | (add) | (add) | PWM | Yes | 4.8–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 1.50–3.37 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | 0.036 A36 mA | — | — | ||
Make: Graupner
Stall Current: (add)
Shaft Power: 0.62 W
Weight: 1.38 oz39.1 g
Size Class: Standard
Diameter: —
Dimensions: 1.52×0.75×1.46 in 38.6×19.0×37.1 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 23
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 1.22 W
Weight: 1.45 oz41.1 g
Size Class: Standard
Diameter: —
Dimensions: 1.50×0.75×1.57 in 38.1×19.0×39.9 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Carbon
Gear Spline/Teeth: 23
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 0.81–1.22 W
Weight: 1.59 oz45.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.52×0.75×1.57 in 38.6×19.0×39.9 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Karbonite
Gear Spline/Teeth: 23
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 1.15 W
Weight: 1.73 oz49.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.54×0.75×1.57 in 39.1×19.0×39.9 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: (add)
Gear Spline/Teeth: 23
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 1.28 W
Weight: 1.69 oz47.9 g
Size Class: Standard
Diameter: —
Dimensions: 1.54×0.75×1.54 in 39.1×19.0×39.1 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 23
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 2.08 W
Weight: 2.12 oz60.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.54×0.75×1.54 in 39.1×19.0×39.1 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 23
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 2.17–3.49 W
Weight: 1.73 oz49.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.54×0.77×1.56 in 39.1×19.6×39.6 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 23
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 2.81 W
Weight: 2.08 oz59.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.54×0.75×1.54 in 39.1×19.0×39.1 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 23
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 2.16 W
Weight: 1.98 oz56.1 g
Size Class: Standard
Diameter: —
Dimensions: 1.54×0.75×1.54 in 39.1×19.0×39.1 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 23
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: —
Weight: 1.98 oz56.0 g
Size Class: Unknown
Diameter: —
Dimensions: 1.54×0.75×1.54 in 39.0×19.0×39.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 23
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 1.75–2.35 W
Weight: 1.52 oz43.0 g
Size Class: Low Profile
Diameter: —
Dimensions: 1.59×0.75×1.04 in 40.4×19.0×26.4 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 23
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 2.03 W
Weight: 2.08 oz59.0 g
Size Class: Large
Diameter: —
Dimensions: 1.57×0.83×1.50 in 39.9×21.1×38.1 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 23
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 90°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 2.07 W
Weight: 2.19 oz62.1 g
Size Class: Standard
Diameter: —
Dimensions: 1.54×0.75×1.54 in 39.1×19.0×39.1 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 23
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: 3 ms
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 3.56 W
Weight: 2.29 oz64.9 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.83×1.57 in 39.9×21.1×39.9 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 23
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 2.49–4.01 W
Weight: 2.26 oz64.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.83×1.57 in 40.4×21.1×39.9 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 23
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 1.68–2.67 W
Weight: 2.15 oz61.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.83×1.57 in 40.4×21.1×39.9 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 23
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: ≤2.3 A≤2300 mA
Shaft Power: 4.33 W
Weight: 2.43 oz69.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.83×1.57 in 40.4×21.1×39.9 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 23
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 90°
Mech. Limit: (add)
Pulse Cycle: 3 ms
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 6.57–8.73 W
Weight: 2.36 oz67.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.83×1.57 in 40.4×21.1×39.9 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 23
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 1.39 W
Weight: (add)
Size Class: Standard
Diameter: —
Dimensions: 1.50×0.75×1.58 in 38.0×19.0×40.0 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: (add)
Gear Spline/Teeth: 23
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 2.12–3.49 W
Weight: 2.22 oz63.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.83×1.48 in 40.4×21.1×37.6 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 23
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 0.74–1.72 W
Weight: 1.52 oz43.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.38×0.63×1.38 in 35.0×16.0×35.0 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: 5 ms
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 200 Hz
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 0.86–1.93 W
Weight: 1.52 oz43.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.38×0.63×1.36 in 35.0×16.0×34.5 mm
Case Material: Metal
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: Yes
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 0.74–1.72 W
Weight: 1.27 oz36.0 g
Size Class: Mini
Diameter: —
Dimensions: 1.38×0.63×1.36 in 35.0×16.0×34.5 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: 2500 ms
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 0.86–1.93 W
Weight: 1.13 oz32.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.38×0.63×1.38 in 35.0×16.0×35.0 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Karbonite
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 90°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: Yes
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 1.50–3.37 W
Weight: 1.83 oz52.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.77×1.56 in 40.0×19.5×39.5 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Karbonite
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 90°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: Yes
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Quick Tips
- Models with an asterisk (*) have been discontinued.
- Click on any servo model name to see more details about that product.
- Click on any brand name to filter all servos for that brand.
- In the desktop view, click on any column header to sort the table by that attribute. Click again to reverse the order.
Compare Prices for
Unable to load results. Please try again.