Discover XQ-Power Servos in Our eBay Store!

Shop Now
Spektrum H6040
Standard Discontinued

Spektrum H6040

Compatible Hardware

*Spec is estimated from brand data.

Technical Specifications

Last Updated: 2026-10-08
Identity
Brand Spektrum
Product Number SPMSH6040
Category Hobby
Discontinued Yes
Performance
Torque
6.0V 167.00 oz-in
4.8V 133.00 oz-in Below Average
Speed
6.0V 0.08 sec/60°
4.8V 0.10 sec/60° Above Average
Physical
Weight 1.85 ozAbove Average
Dimensions L 1.60 in
W 0.80 in
H 1.50 in
Case Material Aluminum
Drivetrain
Motor Type Coreless
Gears Titanium
Gear Spline/Teeth 23 T estimate
Rotation/Support Dual Bearings
Control & Signal
Modulation Digital
Control System PWM
Electrical & Environment
Operating Voltage 4.8–6 V
Connectivity
Connector Z
Wire Length 200 mm

Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.

Class Comparison

TorqueBelow Average
Stronger than 28% of 1043 Digital Standard servos at 4.8V
SpeedAbove Average
Faster than 78% of 1041 Digital Standard servos at 4.8V
WeightAbove Average
Lighter than 82% of 1902 Digital Standard servos

Performance Analysis

Shaft Power 2.46–3.86 W
Power Density2.010 W/in³
More power-dense than 44% of 1759 Digital Standard servos
Torque Density2.5382 oz-in/g
Stronger than 33% of 1036 Digital Standard servos
Torque-to-Volume Ratio69.27 oz-in/in³
Denser torque than 26% of 1042 Digital Standard servos
Speed-to-Weight0.19084 (1/sec·g)
Faster than 84% of 1033 Digital Standard servos
Speed-Torque Trade-off13.30
Better balanced than 20% of 1031 Digital Standard servos
Torque Gain per Volt21.30%/V
More voltage-responsive (torque) than 87% of 850 Digital Standard servos
Speed Gain per Volt20.83%/V
More voltage-responsive (speed) than 84% of 871 Digital Standard servos
Voltage Range Width1.2 V
Wider voltage range than 19% of 1539 Digital Standard servos

Similar Active Servos

Reviews (4)

  • Gary

    February 24, 2013

    Application(s): Cyclic servo T Rex 700

    Comments: Very good servo exactly the same spec as Align DS610 more than likely the same servo.
    Ran this servo now for about 18 months and still going well.

  • ivor

    December 20, 2010

    Application(s): hirobo bell 47gs on the tail as the new jr 8900g burnt-out as i run 7.4volts through a voltage reg and only run it for 2mins, so i replaced it with a spektrum h6040 servo and i am very happy with it. this is a new model as i have not fired it up yet but hope to over xmas.

    Comments: have been flying model helicopters from 1976 to 2010 and these,s servos are the bee,s knee,s and look at running more of these in my other models.

  • Pani

    December 5, 2010

    Application(s): Cyclic for Hirobo SDX 50

    Comments: Great cyclic servo. Awesome speed and excellent centering. Have them for about a year running straight 2S A123. Highly recommended.

  • scott3708

    January 15, 2010

    Application(s): Spektrum H6040 Heli servo

    Comments: Wow these are awesome just put three in my Rappy 50 SE. Had JR 821's and after crashing once replaced aileron 821 (locked hard over), and almost crashing twice more all 821 related, I am done with the 821's. The H6040 are fast strong and after a gallon fuel still flawless and I have heard of no one else crashing because of these. They come reccomended for 50-90 heli's and a 1 year warranty. So for $219 for three at helidirect.com that was cheaper than my crash from 30' to pavement.....

Submit a review of Spektrum H6040