Discover XQ-Power Servos in Our eBay Store!
Shop Now
Technical Specifications
Last Updated: 2026-10-24
Weight
Dimensions
Torque
Speed
Current
Temp
Wire
| Identity | |
| Brand |  |
| Product Number | B-08KG |
| Category | Hobby |
| Performance | |
| Torque |
6.0V
111.10 oz-in
8.00 kg-cm
0.8 N-m
4.8V
83.30 oz-in
6.00 kg-cm
0.6 N-m
Average
|
| Speed |
6.0V
0.15 sec/60°
400.0 deg/s
66.7 RPM
4.8V
0.19 sec/60°
315.8 deg/s
52.6 RPM
Average
|
| Running Current |
6.0V
0.240 A
240 mA
4.8V
0.220 A
220 mA
Average
|
| Stall Current | 1.3–1.6 A1300–1600 mAAverage |
| Physical | |
| Weight | 1.83 oz52.0 gAverage |
| Dimensions |
L 1.602 in W 0.787 in H 1.78 in L 40.7 mm W 20.0 mm H 45.2 mm |
| Drivetrain | |
| Motor Type | Brushed |
| Gears | Steel |
| Gear Spline/Teeth | 25 T estimate |
| Rotation/Support | Dual Bearings |
| Control & Signal | |
| Modulation | Analog |
| Direction | Clockwise |
| Rotational Range | 110° |
| Mechanical Limit | 165° |
| Pulse Width | 700-2100 µs |
| Neutral Position | 1500 µs |
| Dead Band | 20 µs |
| Refresh Rate | 333 Hz |
| Angle Sensor | Potentiometer |
| Control System | PWM |
| Electrical & Environment | |
| Operating Voltage | 4.8–6 V |
| Temperature | -10–50 °C14–122 °F |
| Idle Current | 0.006 A6 mA |
| Connectivity | |
| Connector | JR (Universal) |
| Wire Length | 250 mm9.84 in |
Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.
Class Comparison
| Torque | Average Stronger than 52% of 198 Analog Standard servos at 4.8V |
| Speed | Average Faster than 39% of 195 Analog Standard servos at 4.8V |
| Weight | Average Lighter than 37% of 447 Analog Standard servos |
| Running Current | Average Lower draw than 38% of 49 Analog Standard servos at 4.8V |
| Stall Current | Average Lower draw than 44% of 63 Analog Standard servos |
Performance Analysis
| Shaft Power | 0.81–1.37 W |
| Power Density | 0.610 W/in³ More power-dense than 55% of 432 Analog Standard servos |
| Torque Density | 1.6019 oz-in/g Stronger than 48% of 198 Analog Standard servos |
| Torque-to-Volume Ratio | 37.10 oz-in/in³ Denser torque than 42% of 198 Analog Standard servos |
| Speed-to-Weight | 0.10122 (1/sec·g) Faster than 34% of 195 Analog Standard servos |
| Speed-Torque Trade-off | 15.83 Better balanced than 58% of 195 Analog Standard servos |
| Current-per-Torque Ratio | 0.0192 A/oz-in More efficient than 38% of 54 Analog Standard servos |
| Idle-to-Running Current Ratio | 0.027 Lower idle draw than 73% of 38 Analog Standard servos |
| No-Load vs Stall Current Spread | 7.27 Narrower current spread than 44% of 35 Analog Standard servos |
| Torque Gain per Volt | 27.81%/V 5th-highest torque gain per volt of 156 Analog Standard servos |
| Speed Gain per Volt | 22.22%/V More voltage-responsive (speed) than 85% of 156 Analog Standard servos |
| Voltage Range Width | 1.2 V Wider voltage range than 19% of 239 Analog Standard servos |
| Dead-Band-to-Pulse-Width Ratio | 0.0143 Finer dead band than 11% of 56 Analog Standard servos |
Similar Active Servos
Reviews of Savöx B08KG
Be the first to review!