Discover XQ-Power Servos in Our eBay Store!

Shop Now
Robbe S0009
Micro

Robbe S0009

Compatible Hardware

*Based on known specs.

Technical Specifications

Last Updated: 2026-10-23
Identity
Brand Robbe
Product Number S0009D
Category Hobby
Performance
Torque
6.0V 20.83 oz-in
4.8V 16.66 oz-in Below Average
Speed
6.0V 0.10 sec/60°
4.8V 0.12 sec/60° Average
Running Current
6.0V 0.300 A
4.8V 0.260 A Below Average
Stall Current 0.8–0.9 ABelow Average
Physical
Weight 0.35 ozBelow Average
Dimensions L 0.878 in
W 0.465 in
H 1.035 in
Drivetrain
Motor Type 3-pole
Gears Plastic
Gear Spline/Teeth 21 T
Rotation Mode Positional
Rotation/Support Bushing
Control & Signal
Modulation Analog
Rotational Range 90°
Pulse Width 1000-2000 µs
Neutral Position 1500 µs
Dead Band 4 µs
Control System PWM
Electrical & Environment
Operating Voltage 4.8–6 V
Temperature -10–50 °C
Idle Current 0.010 A
Connectivity
Connector Futaba | JR
Wire Length 179.9 mm
Origin
Country of Origin German

Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.

Class Comparison

TorqueBelow Average
Stronger than 31% of 160 Analog Micro servos at 4.8V
SpeedAverage
Faster than 45% of 160 Analog Micro servos at 4.8V
WeightBelow Average
Lighter than 30% of 336 Analog Micro servos
Running CurrentBelow Average
Lower draw than 17% of 31 Analog Micro servos at 4.8V
Stall CurrentBelow Average
Lower draw than 28% of 48 Analog Micro servos

Performance Analysis

Shaft Power 0.26–0.39 W
Power Density0.911 W/in³
More power-dense than 57% of 322 Analog Micro servos
Torque Density1.6660 oz-in/g
Stronger than 18% of 160 Analog Micro servos
Torque-to-Volume Ratio39.43 oz-in/in³
Denser torque than 26% of 160 Analog Micro servos
Speed-to-Weight0.83333 (1/sec·g)
Faster than 40% of 160 Analog Micro servos
Speed-Torque Trade-off2.00
Better balanced than 34% of 159 Analog Micro servos
Current-per-Torque Ratio0.0540 A/oz-in
More efficient than 22% of 38 Analog Micro servos
Idle-to-Running Current Ratio0.038
5th-highest idle-to-running current ratio of 24 Analog Micro servos
No-Load vs Stall Current Spread3.46
Narrower current spread than 77% of 23 Analog Micro servos
Torque Gain per Volt20.86%/V
More voltage-responsive (torque) than 83% of 101 Analog Micro servos
Speed Gain per Volt16.67%/V
More voltage-responsive (speed) than 46% of 101 Analog Micro servos
Voltage Range Width1.2 V
Wider voltage range than 22% of 174 Analog Micro servos
Dead-Band-to-Pulse-Width Ratio0.0040
Finer dead band than 59% of 42 Analog Micro servos

Similar Active Servos

Reviews of Robbe S0009

Be the first to review!

Submit a review of Robbe S0009