Reely CYS-S0090

Search Amazon Search eBay

Compatible Hardware

Amazon eBay

*Based on known specs.

Technical Specifications

Last Updated: 2026-10-24

Identity
Brand
Product Number	2203091-62
Category	Hobby
Performance
Torque	7.4V 138.78 oz-in 6.0V 124.62 oz-in Above Average
Speed	7.4V 0.12 sec/60° 6.0V 0.14 sec/60° Above Average
Running Current	7.4V 0.300 A 6.0V 0.200 A Average
Stall Current	2.3–2.5 ABottom 10%
Physical
Weight	1.98 ozBelow Average
Dimensions	L 1.61 in W 0.79 in H 1.50 in
Case Material	Metal
Drivetrain
Motor Type	Cored
Gears	Metal
Gear Spline/Teeth	25 T
Rotation Mode	Positional
Rotation/Support	Single Bearing
Control & Signal
Modulation	Analog
Direction	Counterclockwise
Rotational Range	90°
Pulse Width	1000-2000 µs
Neutral Position	1500 µs
Dead Band	4 µs
Control System	PWM
Electrical & Environment
Operating Voltage	6–7.4 V
Temperature	-10–50 °C
Water Rating	Splashproof
Idle Current	0.020 A
Connectivity
Connector	JR (Universal)
Wire Length	300 mm
Origin
Country of Origin	Germany

Submit Missing Data Report an Error

Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.

Compatible Hardware

Amazon eBay

*Based on known specs.

Class Comparison

Torque	Above Average Stronger than 74% of 198 Analog Standard servos at 6.0V
Speed	Above Average Faster than 84% of 195 Analog Standard servos at 6.0V
Weight	Below Average Lighter than 20% of 448 Analog Standard servos
Running Current	Average Lower draw than 44% of 49 Analog Standard servos at 6.0V
Stall Current	Bottom 10% Lower draw than 8% of 63 Analog Standard servos

Performance Analysis

Shaft Power	1.65–2.14 W
Power Density	1.121 W/in³ More power-dense than 85% of 433 Analog Standard servos
Torque Density	2.2254 oz-in/g Stronger than 74% of 198 Analog Standard servos
Torque-to-Volume Ratio	65.32 oz-in/in³ Denser torque than 75% of 198 Analog Standard servos
Speed-to-Weight	0.12755 (1/sec·g) Faster than 71% of 195 Analog Standard servos
Speed-Torque Trade-off	17.45 Better balanced than 64% of 195 Analog Standard servos
Current-per-Torque Ratio	0.0201 A/oz-in More efficient than 32% of 54 Analog Standard servos
Idle-to-Running Current Ratio	0.100 Lower idle draw than 11% of 38 Analog Standard servos
No-Load vs Stall Current Spread	12.50 Narrower current spread than 15% of 35 Analog Standard servos
Torque Gain per Volt	8.12%/V More voltage-responsive (torque) than 17% of 156 Analog Standard servos
Speed Gain per Volt	11.90%/V More voltage-responsive (speed) than 29% of 156 Analog Standard servos
Voltage Range Width	1.4 V Wider voltage range than 78% of 239 Analog Standard servos
Dead-Band-to-Pulse-Width Ratio	0.0040 Finer dead band than 55% of 56 Analog Standard servos