Discover XQ-Power Servos in Our eBay Store!

Shop Now
NitroPro CT3 JTP 500
Standard

NitroPro CT3 JTP 500

Compatible Hardware

*Based on known specs.

Technical Specifications

Last Updated: 2026-07-10
Identity
Brand NitroPro
Product Number (add)
Category Hobby
Performance
Torque
8.4V 556.00 oz-in
7.4V 500.00 oz-in
6.0V 430.00 oz-in
Speed
8.4V 0.09 sec/60°
7.4V 0.10 sec/60°
6.0V 0.12 sec/60°
Running Current (add)
Stall Current (add)
Physical
Weight 2.86 oz
Dimensions L 1.57 in
W 0.79 in
H 1.48 in
Case Material Aluminum
Drivetrain
Motor Type Brushless
Motor Drive (add)
Gears (add)
Gear Spline/Teeth 25 T
Shaft Size (add)
Rotation Mode (add)
Rotation/Support (add)
Backlash (add)
Control & Signal
Modulation (add)
Direction (add)
Rotational Range (add)
Mechanical Limit (add)
Pulse Cycle (add)
Pulse Width (add)
Neutral Position 1520 µs
Dead Band (add)
Refresh Rate 333 Hz
Angle Sensor (add)
Control System (add)
Programmable (add)
Signal Voltage (add)
Electrical & Environment
Operating Voltage 4.8–8.4 V
Power Source 2S LiPo
Regulator Type BEC
Temperature -15–70 °C
Water Rating IP67
Certification (add)
Idle Current (add)
Connectivity
Connector JR (Universal)
Wire Length (add)
Origin
Country of Origin USA

Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.

Performance Analysis

Shaft Power 6.63–11.42 W
Torque Density5.3086 oz-in/g
Torque-to-Volume Ratio234.88 oz-in/in³
Power Density6.239 W/in³
More power-dense than 89% of the 2353 Standard servos in the database
Speed-to-Weight0.10288 (1/sec·g)
Speed-Torque Trade-off51.60
Voltage Range Width3.6 V
Wider voltage range than 80% of the 1592 Standard servos in the database

Similar Active Servos

Reviews of NitroPro CT3 JTP 500

Be the first to review!

Submit a review of NitroPro CT3 JTP 500