Discover XQ-Power Servos in Our eBay Store!
Shop Now
Technical Specifications
Last Updated: 2026-10-23
Weight
Dimensions
Torque
Speed
Current
Temp
Wire
| Identity | |
| Brand |  |
| Product Number | S0027001 |
| Category | Hobby |
| Performance | |
| Torque |
8.4V
597.10 oz-in
43.00 kg-cm
4.2 N-m
8.2V
597.10 oz-in
43.00 kg-cm
4.2 N-m
7.4V
538.80 oz-in
38.80 kg-cm
3.8 N-m
6.0V
436.00 oz-in
31.40 kg-cm
3.1 N-m
|
| Speed |
8.4V
0.10 sec/60°
612.2 deg/s
102.0 RPM
8.2V
0.10 sec/60°
612.2 deg/s
102.0 RPM
7.4V
0.11 sec/60°
545.5 deg/s
90.9 RPM
6.0V
0.14 sec/60°
444.4 deg/s
74.1 RPM
|
| Physical | |
| Weight | 2.61 oz74.0 gBelow Average |
| Dimensions |
L 1.575 in W 0.787 in H 1.528 in L 40.0 mm W 20.0 mm H 38.8 mm |
| Case Material | Aluminum |
| Drivetrain | |
| Motor Type | Coreless |
| Gears | Steel |
| Gear Spline/Teeth | 25 T estimate |
| Rotation/Support | Dual Bearings |
| Control & Signal | |
| Modulation | Digital |
| Pulse Cycle | 3 ms |
| Neutral Position | 1520 µs |
| Dead Band | 0.7 µs |
| Refresh Rate | 333 Hz |
| Control System | PWM |
| Programmable | Yes |
| Electrical & Environment | |
| Operating Voltage | 4.8–8.4 V |
| Power Source | 2S LiPo |
| Temperature | -10–60 °C14–140 °F |
| Connectivity | |
| Connector | JR (Universal) estimate |
| Origin | |
| Country of Origin | Taiwan |
Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.
Class Comparison
| Weight | Below Average Lighter than 23% of 1880 Digital Standard servos |
Performance Analysis
| Shaft Power | 5.97–11.27 W |
| Power Density | 5.947 W/in³ More power-dense than 85% of 1768 Digital Standard servos |
| Torque Density | 5.8919 oz-in/g |
| Torque-to-Volume Ratio | 230.17 oz-in/in³ |
| Speed-to-Weight | 0.10010 (1/sec·g) |
| Speed-Torque Trade-off | 58.87 |
| Voltage Range Width | 3.6 V Wider voltage range than 84% of 1560 Digital Standard servos |
Similar Active Servos
MKS HBL599-DroneCAN
Weight: 73.12 grams
Dimensions: 1.5748" x 0.7874" x 1.5276"
Size Class: Standard
Reviews (2)
Includes 2 reviews aggregated from around the web.
There are very few reviews for this servo on the web. An Arduino forum user driving a hydraulic valve on a crane reports that this servo was too jittery and erratic for his setup.
Be the first to review!