Discover XQ-Power Servos in Our eBay Store!

Shop Now
MKS HBL380
Standard

MKS HBL380

Compatible Hardware

*Spec is estimated from brand data.

Technical Specifications

Last Updated: 2026-10-23
Identity
Brand MKS
Product Number MKS-HBL380
Category Hobby
Performance
Torque
8.2V 569.38 oz-in
7.4V 541.61 oz-in
6.0V 430.51 oz-in
Speed
8.2V 0.08 sec/60°
7.4V 0.09 sec/60°
6.0V 0.11 sec/60°
Stall Current 5.9–8.1 ABottom 10%
Physical
Weight 2.57 ozBelow Average
Dimensions L 1.575 in
W 0.787 in
H 1.516 in
Case Material Aluminum
Drivetrain
Motor Type Brushless
Gears Titanium
Gear Spline/Teeth 25 T estimate
Rotation/Support Dual Bearings
Control & Signal
Modulation Digital
Pulse Cycle 3.003 ms
Neutral Position 1520 µs
Dead Band 0.8 µs
Refresh Rate 333 Hz
Angle Sensor Potentiometer
Control System PWM
Programmable Yes
Electrical & Environment
Operating Voltage 3.5–8.4 V
Power Source 2S LiPo
Temperature -10–60 °C
Connectivity
Connector JR (Universal) estimate
Wire Length 240 mm

Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.

Class Comparison

WeightBelow Average
Lighter than 26% of 1880 Digital Standard servos
Stall CurrentBottom 10%
Lower draw than 7% of 570 Digital Standard servos

Performance Analysis

Shaft Power 6.98–12.84 W
Power Density6.831 W/in³
More power-dense than 90% of 1768 Digital Standard servos
Torque Density5.8974 oz-in/g
Torque-to-Volume Ratio229.06 oz-in/in³
Speed-to-Weight0.12016 (1/sec·g)
Speed-Torque Trade-off49.08
Current-per-Torque Ratio0.0188 A/oz-in
Voltage Range Width4.9 V
Wider voltage range than 96% of 1560 Digital Standard servos

Similar Active Servos

Reviews (2)

Includes 2 reviews aggregated from around the web.

There are very few ratings for this servo on the web. A retailer lists a single 5 out of 5 rating, and a helicopter builder chose it as the high-torque servo for a large build, with no complaints reported.

Be the first to review!

Submit a review of MKS HBL380