Discover XQ-Power Servos in Our eBay Store!

Shop Now
Hitec HS-7954SH
Standard Discontinued

Hitec HS-7954SH

Compatible Hardware

*Based on known specs.

Technical Specifications

Last Updated: 2026-10-27
Identity
Brand Hitec
Product Number 37954S
Category Hobby
Discontinued Yes
Performance
Torque
7.4V 403.00 oz-in
6.0V 333.00 oz-in
4.8V 250.00 oz-in Average
Speed
7.4V 0.12 sec/60°
6.0V 0.15 sec/60°
4.8V 0.19 sec/60° Below Average
Running Current
6.0V 0.300 A
4.8V 0.240 A Average
Stall Current 3–4.2 ABelow Average
Physical
Weight 2.40 ozAverage
Dimensions L 1.575 in
W 0.787 in
H 1.457 in
Case Material Plastic / Aluminum
Drivetrain
Motor Type Coreless Brushed
Motor Drive MOS
Gears Steel
Gear Spline/Teeth 24 T
Shaft Size 5.8 mm
Rotation Mode Positional
Rotation/Support Dual Bearings
Control & Signal
Modulation Digital
Direction Clockwise
Rotational Range 180°
Mechanical Limit 180°
Pulse Width 1100-1900 µs
Neutral Position 1500 µs
Dead Band 1 µs
Angle Sensor Potentiometer
Control System PWM
Programmable Yes
Signal Voltage 3-5V
Electrical & Environment
Operating Voltage 4.8–7.4 V
Power Source 2S Li-Po
Regulator Type Direct
Temperature -20–60 °C
Water Rating IP54
Certification CE | ROHS | EMC
Idle Current 0.009 A
Connectivity
Connector JR (Universal)
Wire Length 300 mm

Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.

Class Comparison

TorqueAverage
Stronger than 59% of 1055 Digital Standard servos at 4.8V
SpeedBelow Average
Faster than 14% of 1038 Digital Standard servos at 4.8V
WeightAverage
Lighter than 39% of 1872 Digital Standard servos
Running CurrentAverage
Lower draw than 48% of 226 Digital Standard servos at 4.8V
Stall CurrentBelow Average
Lower draw than 34% of 569 Digital Standard servos

Performance Analysis

Shaft Power 2.43–6.21 W
Power Density3.438 W/in³
More power-dense than 65% of 1762 Digital Standard servos
Torque Density3.6765 oz-in/g
Stronger than 54% of 1048 Digital Standard servos
Torque-to-Volume Ratio138.43 oz-in/in³
Denser torque than 60% of 1053 Digital Standard servos
Speed-to-Weight0.07740 (1/sec·g)
Faster than 12% of 1031 Digital Standard servos
Speed-Torque Trade-off47.50
Better balanced than 73% of 1029 Digital Standard servos
Current-per-Torque Ratio0.0168 A/oz-in
More efficient than 41% of 330 Digital Standard servos
Idle-to-Running Current Ratio0.038
Lower idle draw than 68% of 167 Digital Standard servos
No-Load vs Stall Current Spread17.50
Narrower current spread than 51% of 179 Digital Standard servos
Torque Gain per Volt23.54%/V
More voltage-responsive (torque) than 91% of 868 Digital Standard servos
Speed Gain per Volt22.43%/V
More voltage-responsive (speed) than 88% of 868 Digital Standard servos
Voltage Range Width2.6 V
Wider voltage range than 67% of 1552 Digital Standard servos
Dead-Band-to-Pulse-Width Ratio0.0013
Finer dead band than 59% of 501 Digital Standard servos

Similar Active Servos

Reviews (3)

  • Игорь

    April 9, 2017

    Application(s): Стоит на рудере 2.2 м

    Comments: Слабое место- шестерня, слизало шлицы

  • Paul

    December 16, 2013

    Application(s): SCX10 and Axail Wrait.

    Comments: Had it for years now. Powered off a BEC @6v. Unstoppable. Mine has been through rivers and all-sorts of muck. Keeps on ticking and is as strong as a bull. Helps push those weighted 2.2 TSLs.

  • TCCustoms

    June 18, 2013

    Application(s): Axial AX-10 Rock Crawler front steering servo

    Comments: Holy Crap...this this is fast and strong! Running on 2s 7.4v and it doesnt hesitate for anything. Wished it was waterproof but still very happy

Submit a review of Hitec HS-7954SH