Discover XQ-Power Servos in Our eBay Store!

Shop Now
Hitec HS-6975HB
Standard Discontinued

Hitec HS-6975HB

Compatible Hardware

*Spec is estimated from brand data.

Technical Specifications

Last Updated: 2026-10-22
Identity
Brand Hitec
Product Number 36975S
Category Hobby
Discontinued Yes
Performance
Torque
6.0V 144.40 oz-in
4.8V 119.40 oz-in Below Average
Speed
6.0V 0.10 sec/60°
4.8V 0.13 sec/60° Average
Running Current
6.0V 0.240 A
4.8V 0.200 A Average
Stall Current 2.4–3 AAverage
Physical
Weight 1.83 ozAbove Average
Dimensions L 1.57 in
W 0.78 in
H 1.45 in
Drivetrain
Motor Type Coreless
Gears Karbonite
Gear Spline/Teeth 24 T estimate
Rotation/Support Dual Bearings
Control & Signal
Modulation Digital
Direction Clockwise
Pulse Cycle 20 ms
Pulse Width 900-2100 µs
Neutral Position 1500 µs
Refresh Rate 200 Hz
Programmable Yes
Electrical & Environment
Operating Voltage 4.8–6 V
Idle Current 0.003 A
Connectivity
Connector S

Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.

Class Comparison

TorqueBelow Average
Stronger than 23% of 1060 Digital Standard servos at 4.8V
SpeedAverage
Faster than 60% of 1045 Digital Standard servos at 4.8V
WeightAbove Average
Lighter than 84% of 1880 Digital Standard servos
Running CurrentAverage
Lower draw than 53% of 226 Digital Standard servos at 4.8V
Stall CurrentAverage
Lower draw than 60% of 570 Digital Standard servos

Performance Analysis

Shaft Power 1.70–2.67 W
Power Density1.504 W/in³
More power-dense than 32% of 1768 Digital Standard servos
Torque Density2.2962 oz-in/g
Stronger than 27% of 1053 Digital Standard servos
Torque-to-Volume Ratio67.24 oz-in/in³
Denser torque than 25% of 1058 Digital Standard servos
Speed-to-Weight0.14793 (1/sec·g)
Faster than 71% of 1038 Digital Standard servos
Speed-Torque Trade-off15.52
Better balanced than 26% of 1034 Digital Standard servos
Current-per-Torque Ratio0.0251 A/oz-in
More efficient than 18% of 331 Digital Standard servos
Idle-to-Running Current Ratio0.015
Lower idle draw than 89% of 167 Digital Standard servos
No-Load vs Stall Current Spread15.00
Narrower current spread than 63% of 179 Digital Standard servos
Torque Gain per Volt17.45%/V
More voltage-responsive (torque) than 65% of 873 Digital Standard servos
Speed Gain per Volt25.01%/V
More voltage-responsive (speed) than 95% of 874 Digital Standard servos
Voltage Range Width1.2 V
Wider voltage range than 21% of 1560 Digital Standard servos

Similar Active Servos

Reviews (1)

  • Husafreak

    January 19, 2010

    Application(s): Trex 600E swash

    Comments: Gotta admit these servos flew well enough. But after almost 3 years I decided to recheck my setup with the Trueblood swash leveler and other precise tools. The centering and positioning of these servos is pretty bad. Off by over one degree blade pitch depending on which way stick is moving when stopped, difficult to get accurate setup, I am replacing these servos.

Submit a review of Hitec HS-6975HB