Discover XQ-Power Servos in Our eBay Store!
Shop Now
Technical Specifications
Last Updated: 2026-09-14| Identity | |
| Brand |  |
| Product Number | 35955 |
| Category | Hobby |
| Discontinued | Yes |
| Performance | |
| Torque |
6.0V
333.30 oz-in
24.00 kg-cm
2.4 N-m
4.8V
249.97 oz-in
18.00 kg-cm
1.8 N-m
Average
|
| Speed |
6.0V
0.15 sec/60°
400.0 deg/s
66.7 RPM
4.8V
0.19 sec/60°
315.8 deg/s
52.6 RPM
Below Average
|
| Running Current |
6.0V
0.300 A
300 mA
4.8V
0.220 A
220 mA
Average
|
| Stall Current | 3.4–4.2 A3400–4200 mABelow Average |
| Physical | |
| Weight | 2.17 oz61.5 gAverage |
| Dimensions |
L 1.575 in W 0.787 in H 1.457 in L 40.0 mm W 20.0 mm H 37.0 mm |
| Case Material | Metal / Plastic |
| Drivetrain | |
| Motor Type | Coreless |
| Gears | Titanium |
| Gear Spline/Teeth | 24 T estimate |
| Rotation Mode | Positional |
| Rotation/Support | Dual Bearings |
| Control & Signal | |
| Modulation | Digital |
| Direction | Clockwise |
| Rotational Range | 90° |
| Pulse Cycle | 20 ms |
| Pulse Width | 900-2100 µs |
| Neutral Position | 1500 µs |
| Dead Band | 2 µs |
| Angle Sensor | Potentiometer |
| Control System | PWM |
| Electrical & Environment | |
| Operating Voltage | 4.8–6 V |
| Temperature | -20–60 °C-4–140 °F |
| Water Rating | Water Resistant |
| Idle Current | 0.003 A3 mA |
| Connectivity | |
| Connector | S |
| Wire Length | 178 mm7.01 in |
Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.
Class Comparison
| Torque | Average Stronger than 58% of 1061 Digital Standard servos at 4.8V |
| Speed | Below Average Faster than 15% of 1044 Digital Standard servos at 4.8V |
| Weight | Average Lighter than 56% of 1879 Digital Standard servos |
| Running Current | Average Lower draw than 50% of 226 Digital Standard servos at 4.8V |
| Stall Current | Below Average Lower draw than 34% of 570 Digital Standard servos |
Performance Analysis
| Shaft Power | 2.43–4.11 W |
| Power Density | 2.275 W/in³ More power-dense than 49% of 1768 Digital Standard servos |
| Torque Density | 4.0646 oz-in/g Stronger than 63% of 1054 Digital Standard servos |
| Torque-to-Volume Ratio | 138.41 oz-in/in³ Denser torque than 60% of 1059 Digital Standard servos |
| Speed-to-Weight | 0.08558 (1/sec·g) Faster than 19% of 1037 Digital Standard servos |
| Speed-Torque Trade-off | 47.49 Better balanced than 73% of 1035 Digital Standard servos |
| Current-per-Torque Ratio | 0.0168 A/oz-in More efficient than 41% of 329 Digital Standard servos |
| Idle-to-Running Current Ratio | 0.014 Lower idle draw than 90% of 166 Digital Standard servos |
| No-Load vs Stall Current Spread | 19.09 Narrower current spread than 47% of 179 Digital Standard servos |
| Torque Gain per Volt | 27.78%/V More voltage-responsive (torque) than 95% of 873 Digital Standard servos |
| Speed Gain per Volt | 22.22%/V More voltage-responsive (speed) than 87% of 873 Digital Standard servos |
| Voltage Range Width | 1.2 V Wider voltage range than 22% of 1560 Digital Standard servos |
| Dead-Band-to-Pulse-Width Ratio | 0.0017 Finer dead band than 47% of 496 Digital Standard servos |
Similar Active Servos
Reviews (4)
-
Paco Ibañez
October 10, 2023Application(s): Hola sabe alguien donde puedo conseguir repuestos y piñonería del servo Hitec 5955TG gracias.
Comments: Aqui en Españña si puede ser
Paco Ibañez
October 10, 2023Application(s): Hola sabe alguien donde puedo conseguir repuestos y piñonería del servo Hitec 5955TG gracias.
anymanusa
February 13, 2014Application(s): axial ax10 crawler powered by Novak Goat
Comments: Love this little servo. Been using Hitec servos for 6 years. Have a half dozen ultra torques. 7955tg, a couple of them in my clod axled supers, and a 5955tg, and a mighty mini 225mg. Top notch company.
Ed P
April 23, 2013Application(s): MBX5-T 1/8 truggy steering servo
Comments: I ran the HS-5955TG servo in my Mugen MBX5-T for steering , I ran 13 gallons of fuel thur the truck before wearing out a gear. Still run them for my all my high torque needs