Discover XQ-Power Servos in Our eBay Store!

Shop Now
Hitec HS-5685MH
Standard Discontinued

Hitec HS-5685MH

Compatible Hardware

*Spec is estimated from brand data.

Technical Specifications

Last Updated: 2026-09-14
Identity
Brand Hitec
Product Number 35685S
Category Hobby
Discontinued Yes
Performance
Torque
7.4V 179.00 oz-in
6.0V 157.00 oz-in Below Average
Speed
7.4V 0.17 sec/60°
6.0V 0.20 sec/60° Below Average
Stall Current 2.1–2.6 AAbove Average
Physical
Weight 2.01 ozAbove Average
Dimensions L 1.598 in
W 0.78 in
H 1.488 in
Drivetrain
Motor Type Brushed
Motor Drive MOS
Gears Metal
Gear Spline/Teeth 24 T estimate
Shaft Size 5.8 mm
Rotation Mode Positional
Rotation/Support Dual Bearings
Control & Signal
Modulation Digital
Direction Clockwise
Rotational Range 80°
Pulse Cycle 20 ms
Pulse Width 900-2100 µs
Neutral Position 1500 µs
Dead Band 4 µs
Angle Sensor Potentiometer
Control System PWM
Programmable Yes
Signal Voltage 3-5V
Electrical & Environment
Operating Voltage 6–7.4 V
Power Source 2S LiPo
Temperature -20–60 °C
Idle Current 7.000 A
Connectivity
Connector JR (Universal)
Wire Length 300 mm

Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.

Class Comparison

TorqueBelow Average
Stronger than 34% of 1043 Digital Standard servos at 6.0V
SpeedBelow Average
Faster than 11% of 1041 Digital Standard servos at 6.0V
WeightAbove Average
Lighter than 69% of 1902 Digital Standard servos
Stall CurrentAbove Average
Lower draw than 73% of 539 Digital Standard servos

Performance Analysis

Shaft Power 1.45–1.95 W
Power Density1.050 W/in³
More power-dense than 19% of 1759 Digital Standard servos
Torque Density2.7544 oz-in/g
Stronger than 38% of 1036 Digital Standard servos
Torque-to-Volume Ratio84.65 oz-in/in³
Denser torque than 33% of 1042 Digital Standard servos
Speed-to-Weight0.08772 (1/sec·g)
Faster than 21% of 1033 Digital Standard servos
Speed-Torque Trade-off31.40
Better balanced than 54% of 1031 Digital Standard servos
Current-per-Torque Ratio0.0166 A/oz-in
More efficient than 46% of 315 Digital Standard servos
Torque Gain per Volt10.01%/V
More voltage-responsive (torque) than 19% of 850 Digital Standard servos
Speed Gain per Volt12.60%/V
More voltage-responsive (speed) than 33% of 871 Digital Standard servos
Voltage Range Width1.4 V
Wider voltage range than 37% of 1539 Digital Standard servos
Dead-Band-to-Pulse-Width Ratio0.0033
Finer dead band than 6% of 468 Digital Standard servos

Similar Active Servos

Reviews of Hitec HS-5685MH

Be the first to review!

Submit a review of Hitec HS-5685MH