Discover XQ-Power Servos in Our eBay Store!
Shop Now
Technical Specifications
Last Updated: 2026-10-22
Weight
Dimensions
Torque
Speed
Current
Temp
Wire
| Identity | |
| Brand |  |
| Product Number | 35565S |
| Category | Hobby |
| Performance | |
| Torque |
7.4V
194.00 oz-in
13.97 kg-cm
1.4 N-m
6.0V
153.00 oz-in
11.02 kg-cm
1.1 N-m
Below Average
|
| Speed |
7.4V
0.09 sec/60°
666.7 deg/s
111.1 RPM
6.0V
0.11 sec/60°
545.5 deg/s
90.9 RPM
Above Average
|
| Stall Current | 2.1–2.7 A2100–2700 mAAbove Average |
| Physical | |
| Weight | 2.12 oz60.0 gAverage |
| Dimensions |
L 1.57 in W 0.78 in H 1.49 in L 39.9 mm W 19.8 mm H 37.8 mm |
| Case Material | Plastic |
| Drivetrain | |
| Motor Type | Coreless Brushed |
| Gears | Metal |
| Gear Spline/Teeth | 24 T |
| Rotation Mode | Positional |
| Rotation/Support | Dual Bearings |
| Control & Signal | |
| Modulation | Digital |
| Direction | Clockwise |
| Rotational Range | 119° |
| Pulse Width | 750-2250 µs |
| Neutral Position | 1500 µs |
| Dead Band | 2 µs |
| Angle Sensor | Potentiometer |
| Control System | PWM |
| Programmable | Yes |
| Signal Voltage | 3-5V |
| Electrical & Environment | |
| Operating Voltage | 6–7.4 V |
| Power Source | 2S LiPo |
| Temperature | -20–60 °C-4–140 °F |
| Idle Current | 0.004 A4 mA |
| Connectivity | |
| Connector | JR (Universal) |
| Wire Length | 300 mm11.81 in |
Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.
Class Comparison
| Torque | Below Average Stronger than 33% of 1060 Digital Standard servos at 6.0V |
| Speed | Above Average Faster than 73% of 1045 Digital Standard servos at 6.0V |
| Weight | Average Lighter than 62% of 1880 Digital Standard servos |
| Stall Current | Above Average Lower draw than 71% of 570 Digital Standard servos |
Performance Analysis
| Shaft Power | 2.57–3.99 W |
| Power Density | 2.184 W/in³ More power-dense than 47% of 1768 Digital Standard servos |
| Torque Density | 2.5500 oz-in/g Stronger than 34% of 1053 Digital Standard servos |
| Torque-to-Volume Ratio | 83.85 oz-in/in³ Denser torque than 33% of 1058 Digital Standard servos |
| Speed-to-Weight | 0.15152 (1/sec·g) Faster than 74% of 1038 Digital Standard servos |
| Speed-Torque Trade-off | 16.83 Better balanced than 28% of 1034 Digital Standard servos |
| Current-per-Torque Ratio | 0.0176 A/oz-in More efficient than 37% of 331 Digital Standard servos |
| Torque Gain per Volt | 19.14%/V More voltage-responsive (torque) than 74% of 873 Digital Standard servos |
| Speed Gain per Volt | 15.87%/V More voltage-responsive (speed) than 52% of 874 Digital Standard servos |
| Voltage Range Width | 1.4 V Wider voltage range than 33% of 1560 Digital Standard servos |
| Dead-Band-to-Pulse-Width Ratio | 0.0013 Finer dead band than 58% of 504 Digital Standard servos |
Similar Active Servos
Reviews (1)
Includes 1 review aggregated from around the web.
There are very few reviews for this servo on the web. The one written owner review calls it excellent value for a high-voltage, high-torque, fast servo with typical Hitec quality, and says it suits 30 to 60cc size 3D aircraft and giant-scale throttle duty. No complaints turned up.
Be the first to review!