Discover XQ-Power Servos in Our eBay Store!

Shop Now
Hitec HS-5665MH
Standard Discontinued

Hitec HS-5665MH

Compatible Hardware

*Spec is estimated from brand data.

Technical Specifications

Last Updated: 2026-09-14
Identity
Brand Hitec
Product Number 35665S
Category Hobby
Discontinued Yes
Performance
Torque
7.4V 139.00 oz-in
6.0V 122.00 oz-in Below Average
Speed
7.4V 0.14 sec/60°
6.0V 0.16 sec/60° Average
Stall Current 2.1–2.6 AAbove Average
Physical
Weight 2.12 ozAverage
Dimensions L 1.614 in
W 0.787 in
H 1.496 in
Case Material Plastic
Drivetrain
Motor Type Brushed
Motor Drive FET
Gears Metal
Gear Spline/Teeth 24 T estimate
Shaft Size 5.8 mm
Rotation/Support Dual Bearings
Control & Signal
Modulation Digital
Direction Clockwise
Rotational Range 40°
Pulse Cycle 20 ms
Pulse Width 900-2100 µs
Neutral Position 1500 µs
Dead Band 4 µs
Refresh Rate 50 Hz
Angle Sensor Potentiometer
Control System PWM
Programmable Yes
Electrical & Environment
Operating Voltage 6–7.4 V
Power Source 2S LiPo
Temperature -20–60 °C
Idle Current 0.007 A
Connectivity
Connector JR (Universal)
Wire Length 300 mm

Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.

Class Comparison

TorqueBelow Average
Stronger than 24% of 1060 Digital Standard servos at 6.0V
SpeedAverage
Faster than 36% of 1045 Digital Standard servos at 6.0V
WeightAverage
Lighter than 62% of 1880 Digital Standard servos
Stall CurrentAbove Average
Lower draw than 73% of 570 Digital Standard servos

Performance Analysis

Shaft Power 1.41–1.84 W
Power Density0.966 W/in³
More power-dense than 16% of 1768 Digital Standard servos
Torque Density2.0333 oz-in/g
Stronger than 23% of 1053 Digital Standard servos
Torque-to-Volume Ratio64.20 oz-in/in³
Denser torque than 23% of 1058 Digital Standard servos
Speed-to-Weight0.10417 (1/sec·g)
Faster than 40% of 1038 Digital Standard servos
Speed-Torque Trade-off19.52
Better balanced than 34% of 1034 Digital Standard servos
Current-per-Torque Ratio0.0213 A/oz-in
More efficient than 25% of 331 Digital Standard servos
Torque Gain per Volt9.95%/V
More voltage-responsive (torque) than 18% of 873 Digital Standard servos
Speed Gain per Volt10.21%/V
More voltage-responsive (speed) than 18% of 874 Digital Standard servos
Voltage Range Width1.4 V
Wider voltage range than 37% of 1560 Digital Standard servos
Dead-Band-to-Pulse-Width Ratio0.0033
Finer dead band than 7% of 504 Digital Standard servos

Similar Active Servos

Reviews of Hitec HS-5665MH

Be the first to review!

Submit a review of Hitec HS-5665MH