Discover XQ-Power Servos in Our eBay Store!

Shop Now
Micro

Hitec HS-5086WP

Compatible Hardware

*Based on known specs.

Technical Specifications

Last Updated: 2026-10-09
Identity
Brand Hitec
Product Number 35086W
Category Hobby
Performance
Torque
6.0V 50.00 oz-in
4.8V 42.00 oz-in Above Average
Speed
6.0V 0.15 sec/60°
4.8V 0.18 sec/60° Bottom 10%
Running Current
6.0V 0.180 A
4.8V 0.160 A Average
Stall Current 1.1–1.8 ABelow Average
Physical
Weight 1.01 ozBottom 10%
Dimensions L 1.22 in
W 0.60 in
H 1.22 in
Case Material Plastic
Drivetrain
Motor Type 3-pole
Motor Drive MOS
Gears Metal
Gear Spline/Teeth 24 T
Rotation/Support Dual Bearings
Control & Signal
Modulation Digital
Mechanical Limit 180°
Pulse Width 1500-1900 µs
Neutral Position 1500 µs
Dead Band 2 µs
Angle Sensor Potentiometer
Control System PWM
Programmable Yes
Electrical & Environment
Operating Voltage 4.8–6 V
Temperature -20–60 °C
Water Rating IP67
Idle Current 0.003 A
Connectivity
Connector JR (Universal)
Wire Length 250 mm

Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.

Class Comparison

TorqueAbove Average
Stronger than 76% of 328 Digital Micro servos at 4.8V
SpeedBottom 10%
Faster than 8% of 328 Digital Micro servos at 4.8V
WeightBottom 10%
Lighter than 0% of 620 Digital Micro servos
Running CurrentAverage
Lower draw than 52% of 53 Digital Micro servos at 4.8V
Stall CurrentBelow Average
Lower draw than 20% of 194 Digital Micro servos

Performance Analysis

Shaft Power 0.43–0.62 W
Power Density0.690 W/in³
More power-dense than 6% of 590 Digital Micro servos
Torque Density1.4737 oz-in/g
Stronger than 8% of 327 Digital Micro servos
Torque-to-Volume Ratio47.03 oz-in/in³
Denser torque than 18% of 327 Digital Micro servos
Speed-to-Weight0.19493 (1/sec·g)
Faster than 0% of 327 Digital Micro servos
Speed-Torque Trade-off7.56
Better balanced than 86% of 327 Digital Micro servos
Current-per-Torque Ratio0.0429 A/oz-in
More efficient than 44% of 85 Digital Micro servos
Idle-to-Running Current Ratio0.019
5th-highest idle-to-running current ratio of 37 Digital Micro servos
No-Load vs Stall Current Spread11.25
Narrower current spread than 20% of 36 Digital Micro servos
Torque Gain per Volt15.87%/V
More voltage-responsive (torque) than 40% of 268 Digital Micro servos
Speed Gain per Volt16.68%/V
More voltage-responsive (speed) than 53% of 273 Digital Micro servos
Voltage Range Width1.2 V
Wider voltage range than 27% of 511 Digital Micro servos
Dead-Band-to-Pulse-Width Ratio0.0050
Finer dead band than 2% of 189 Digital Micro servos

Similar Active Servos

Reviews of Hitec HS-5086WP

Be the first to review!

Submit a review of Hitec HS-5086WP