Discover XQ-Power Servos in Our eBay Store!

Shop Now
Hitec HS-1005SGT
Giant

Hitec HS-1005SGT

Compatible Hardware

*Based on known specs.

Technical Specifications

Last Updated: 2026-10-08
Identity
Brand Hitec
Product Number 3
Category Hobby
Performance
Torque
14.8V 1,528.00 oz-in
11.1V 1,167.00 oz-in Above Average
Speed
14.8V 0.19 sec/60°
11.1V 0.26 sec/60° Below Average
Running Current
14.8V 1.300 A
11.1V 1.100 A Below Average
Stall Current 5.5–6.5 AAverage
Physical
Weight 12.80 ozBelow Average
Dimensions L 2.52 in
W 1.30 in
H 2.87 in
Case Material Aluminum
Drivetrain
Motor Type 5-pole
Motor Drive MOS
Gears Metal / Steel
Gear Spline/Teeth 15 T
Rotation Mode Positional
Rotation/Support Dual Bearings
Control & Signal
Modulation Digital
Rotational Range 120°
Mechanical Limit 139°
Pulse Width 800-2200 µs
Neutral Position 1500 µs
Dead Band 2 µs
Angle Sensor Potentiometer
Control System PWM
Programmable No
Electrical & Environment
Operating Voltage 11.1–14.8 V
Temperature -20–60 °C
Water Rating IP54
Idle Current 0.130 A
Connectivity
Connector JR (Universal) estimate
Wire Length 250 mm

Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.

Class Comparison

TorqueAbove Average
Stronger than 66% of 93 Digital Giant servos at 11.1V
SpeedBelow Average
Faster than 17% of 90 Digital Giant servos at 11.1V
WeightBelow Average
Lighter than 25% of 174 Digital Giant servos
Running CurrentBelow Average
Lower draw than 32% of 29 Digital Giant servos at 11.1V
Stall CurrentAverage
Lower draw than 56% of 102 Digital Giant servos

Performance Analysis

Shaft Power 8.30–14.87 W
Power Density1.582 W/in³
More power-dense than 49% of 132 Digital Giant servos
Torque Density3.2149 oz-in/g
Stronger than 42% of 90 Digital Giant servos
Torque-to-Volume Ratio124.12 oz-in/in³
Denser torque than 54% of 93 Digital Giant servos
Speed-to-Weight0.01060 (1/sec·g)
Faster than 22% of 87 Digital Giant servos
Speed-Torque Trade-off303.38
Better balanced than 77% of 89 Digital Giant servos
Current-per-Torque Ratio0.0056 A/oz-in
More efficient than 59% of 50 Digital Giant servos
Idle-to-Running Current Ratio0.118
Lower idle draw than 8% of 54 Hitec servos
No-Load vs Stall Current Spread5.91
Narrower current spread than 73% of 27 Digital Giant servos
Torque Gain per Volt8.36%/V
More voltage-responsive (torque) than 23% of 65 Digital Giant servos
Speed Gain per Volt9.95%/V
More voltage-responsive (speed) than 20% of 65 Digital Giant servos
Voltage Range Width3.7 V
Wider voltage range than 52% of 160 Digital Giant servos
Dead-Band-to-Pulse-Width Ratio0.0014
Finer dead band than 74% of 36 Digital Giant servos

Similar Active Servos

Reviews of Hitec HS-1005SGT

Be the first to review!

Submit a review of Hitec HS-1005SGT