Discover XQ-Power Servos in Our eBay Store!

Shop Now
Hitec D485HW
Standard

Hitec D485HW

Compatible Hardware

*Based on known specs.

Technical Specifications

Last Updated: 2026-10-08
Identity
Brand Hitec
Product Number 36485S
Category Hobby
Performance
Torque
7.4V 104.18 oz-in
6.0V 88.90 oz-in
4.8V 72.23 oz-in
Speed
7.4V 0.15 sec/60°
6.0V 0.17 sec/60°
4.8V 0.20 sec/60°
Running Current
7.4V 0.320 A
6.0V 0.280 A
4.8V 0.250 A
Stall Current 1–1.5 ATop 10%
Physical
Weight 1.59 ozTop 10%
Dimensions L 1.57 in
W 0.78 in
H 1.49 in
Case Material Plastic
Drivetrain
Motor Type Cored
Gears Karbonite
Gear Spline/Teeth 25 T
Rotation Mode Positional
Rotation/Support Dual Bearings
Control & Signal
Modulation Digital
Rotational Range 175°
Pulse Width 900-2100 µs
Neutral Position 1500 µs
Dead Band 2 µs
Angle Sensor Potentiometer
Control System TTL / PWM
Programmable Yes
Signal Voltage 3-5V
Electrical & Environment
Operating Voltage 3.5–8.4 V
Temperature -20–60 °C
Water Rating IP54
Idle Current 0.030 A
Connectivity
Connector JR (Universal)
Wire Length 300 mm

Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.

Class Comparison

WeightTop 10%
Lighter than 92% of 1902 Digital Standard servos
Stall CurrentTop 10%
Lower draw than 93% of 539 Digital Standard servos

Performance Analysis

Shaft Power 0.67–1.28 W
Power Density0.704 W/in³
More power-dense than 10% of 1759 Digital Standard servos
Torque Density1.6051 oz-in/g
Torque-to-Volume Ratio39.59 oz-in/in³
Speed-to-Weight0.11111 (1/sec·g)
Speed-Torque Trade-off14.45
Current-per-Torque Ratio0.0208 A/oz-in
Idle-to-Running Current Ratio0.120
No-Load vs Stall Current Spread6.00
Voltage Range Width4.9 V
Wider voltage range than 97% of 1539 Digital Standard servos
Dead-Band-to-Pulse-Width Ratio0.0017
Finer dead band than 44% of 468 Digital Standard servos

Similar Active Servos

Reviews (1)

  • Mike

    August 5, 2026

    Application(s): Kaos rc plane

    Comments: Servo failed on 5th flight. Fortunately on landing. Had it failed in the air my new plans built kaos would have been badly damaged or destroyed

Submit a review of Hitec D485HW