Discover XQ-Power Servos in Our eBay Store!

Shop Now
Hextronik MG14
Mini

Hextronik MG14

Compatible Hardware

*Based on known specs.

Technical Specifications

Last Updated: 2026-07-10
Identity
Brand Hextronik
Product Number (add)
Category Hobby
Performance
Torque
6.0V 36.11 oz-in
4.8V 30.55 oz-in
Speed
6.0V 0.10 sec/60°
4.8V 0.11 sec/60°
Running Current (add)
Stall Current (add)
Shaft Power 0.51–0.67 W
Physical
Weight 0.49 oz
Dimensions L 0.91 in
W 0.48 in
H 1.14 in
Case Material (add)
Drivetrain
Motor Type Brushless
Motor Drive (add)
Gears Metal
Gear Spline/Teeth (add)
Rotation Mode (add)
Rotation/Support Dual Bearings
Backlash (add)
Control & Signal
Modulation Analog
Direction (add)
Rotational Range (add)
Mechanical Limit (add)
Pulse Cycle (add)
Pulse Width (add)
Neutral Position (add)
Dead Band 1 µs
Refresh Rate (add)
Angle Sensor (add)
Control System (add)
Programmable (add)
Signal Voltage (add)
Electrical & Environment
Operating Voltage (add)
Power Source (add)
Regulator Type (add)
Temperature 0–55 °C
Water Rating (add)
Certification (add)
Idle Current (add)
Connectivity
Connector JR (Universal)
Wire Length 250 mm
Origin
Country of Origin (add)

Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.

Similar Active Servos

Reviews (1)

  • Peter mIller

    February 11, 2012

    Application(s): Various but one on each aileron and one on each flap on a 1/5th scale RV3 powered by a .52 Four Stroke.

    Comments: Lots of other, similar applications. They work really well. I had one failure and one where the screws sripped and the case started to come apart, Otherwise the 16 that I have are great.

    I used five in an 83" span Slingsby T31M scale powered glider with complete success.

    I plan to use five in a 1/8th scale model in the near future

Submit a review of Hextronik MG14