Discover XQ-Power Servos in Our eBay Store!
Shop Now
Technical Specifications
Last Updated: 2026-07-28Identity
Performance
Physical
Drivetrain
Control & Signal
Electrical & Environment
Connectivity
Origin
Preferences are saved automatically.
| Identity | |
| Brand |  |
| Product Number | (add) |
| Category | Hobby |
| Discontinued | Yes |
| Performance | |
| Torque |
6.0V111.10 oz-in8.00 kg-cm0.8 N-m |
| Speed |
6.0V0.09 sec/60°666.7 deg/s111.1 RPM |
| Running Current | (add) |
| Stall Current | (add) |
| Shaft Power | 2.28 W |
| Physical | |
| Weight | 2.12 oz60.0 g |
| Dimensions |
L 1.54 in W 0.76 in H 1.52 in L 39.1 mm W 19.3 mm H 38.6 mm |
| Case Material | (add) |
| Drivetrain | |
| Motor Type | Coreless |
| Motor Drive | (add) |
| Gears | Metal |
| Gear Spline/Teeth | 23 T estimate |
| Rotation Mode | (add) |
| Rotation/Support | Single Bearing |
| Backlash | (add) |
| Control & Signal | |
| Modulation | Digital |
| Direction | (add) |
| Rotational Range | (add) |
| Mechanical Limit | (add) |
| Pulse Cycle | (add) |
| Pulse Width | (add) |
| Neutral Position | (add) |
| Dead Band | (add) |
| Refresh Rate | (add) |
| Angle Sensor | (add) |
| Control System | (add) |
| Programmable | (add) |
| Signal Voltage | (add) |
| Electrical & Environment | |
| Operating Voltage | (add) |
| Power Source | (add) |
| Regulator Type | (add) |
| Temperature | (add) |
| Water Rating | (add) |
| Certification | (add) |
| Idle Current | (add) |
| Connectivity | |
| Connector | (add) |
| Wire Length | (add) |
| Origin | |
| Country of Origin | (add) |
Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.
Quick Actions
Similar Active Servos
Reviews (6)
-
DCracer1126
July 15, 2011Application(s): Steering Servo for surface app.
Comments: Noisy, but very fast for surface app. Be careful of it's turst. An external BEC is a must have but it is still cheaper to an equal or comparable name brand servo.
sidneyw
July 26, 2010Application(s): Swift 16 tail servo -
Comments: runs hot in DS mode, warmer than usual in Normal mode, jittery at times - good speed, centers well, no overshoot, inexpensive. No idea how long it will last.
towertsk
June 15, 2010Application(s): Cyclic and throttle raptor 50
Comments: They're good enough in my raptor. They are thirsty servos a regulator is needed. If you don't have enough juice you will get a reset in your rx from low voltage, careful!
Rotorboy 2.4gh
March 20, 2010Application(s): Have only seen
Comments: I have only seen these servos work in a bench test observation. ( CAUTION ) To the five star ratings,- They may be, but to trust a five star rating with just a bench test is WAY to jack rabbit of a decision fellas. THEY MAY BE FIVE STARS-- But not till full testing under flight conditions.. SLOW IT DOWN YOUNG BUCS!!! My obsevation was, they looked good,- were strong, but the speed did not come close to a .09rateing, but were MORE than fast enough for general flying conditions. I will wait to here more from T-beats--- My good friend, as HE WILL PUT THEM TO THE TEST--- He is THE madman in the sky-- The brother CAN FLY!!!!!!
t3beatz
February 24, 2010Application(s): 600 size heli cyclic, RC car buggies, 25% rc planes.
Comments: Just bench testing so far and these are great servos at a great price. Better than the Tower Pro servos of the same size (no contest!) careless motor and digital. The torque and speed is awesome.
video... http://www.youtube.com/watch?v=rXSukW0MWk0
DieHard
February 16, 2010Application(s): Bench test so far
Comments: Just received 2 of these and i have tested them out with the Futaba S3003 servo and they are twice as fast as the futaba. They center really great, have no jittery and they don't overshoot at all. this was all test on a world engines TX upgraded to a MicroStar 2000 encoder running a Jr 2.4Ghz corona module and the corona CR8D 8ch RX with a 6v NimH battery.