Discover XQ-Power Servos in Our eBay Store!
Shop NowSearch Matches (2,573)
- Weight: Greater than 1.76 ounces (50 grams)
- Torque: Greater than 417 oz-in (30.03 kg-cm / 2.9 N-m) @ 48 volts
Performance
Physical
Drivetrain
Control & Signal
Electrical & Environment
Connectivity
Origin
Preferences are saved automatically.
| Make | Model | Category | Torque | Speed | Stall Current |
Weight | Dimensions (L×W×H) |
Diameter | Size Class |
Case Material |
Motor Type |
Motor Drive |
Gear Material |
Gear Spline/ Teeth |
Rotation | Modulation | Direction | Op. Range |
Mech. Limit |
Pulse Cycle |
Pulse Width |
Neutral Pos. |
Dead Band |
Refresh Rate |
Angle Sensor |
Control System |
Programmable | Op. Voltage |
Power Source |
Regulator Type |
Temperature | Water Rating |
Certification | Connector | Wire Length |
Country of Origin |
Shaft Power |
Shape | Shaft Size |
Resolution | Gear Ratio |
Baud Rate |
Output Power |
Radial Load |
MCU | Operating Modes |
Running Current |
Rotation Mode |
Idle Current |
Backlash | Signal Voltage |
Compare | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| We may earn a commission from your purchase. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Traxxas | 2075X | Hobby | 6.0V 125.0 oz-in9.00 kg-cm0.9 N-m | 6.0V 0.17 s/60°352.9 deg/s58.8 RPM | (add) | 2.01 oz57.0 g | 2.17×0.85×1.69 in 55.1×21.6×42.9 mm | — | Large | Aluminum / Plastic | Brushed | (add) | Steel | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | (add) | 6 V | (add) | (add) | (add) | Waterproof | (add) | Futaba J | (add) | (add) | 1.36 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Traxxas | 2085 | Hobby | 6.0V 365.0 oz-in26.28 kg-cm2.6 N-m | (add) | (add) | 3.67 oz104.0 g | (add) | — | Unknown | (add) | Brushed | (add) | Steel | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | (add) | 6 V | (add) | (add) | (add) | (add) | (add) | Futaba J | (add) | (add) | — | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Traxxas | 2085R | Hobby | 6.0V 650.0 oz-in46.81 kg-cm4.6 N-m | 6.0V 0.13 s/60°461.5 deg/s76.9 RPM | (add) | 4.41 oz125.0 g | (add) | — | Unknown | (add) | Brushed | (add) | Steel | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | (add) | 6 V | (add) | (add) | (add) | (add) | (add) | Futaba J | (add) | (add) | 9.25 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Traxxas | 2085X | Hobby | (add) | (add) | (add) | 4.41 oz125.0 g | (add) | — | Unknown | (add) | Brushed | (add) | Steel | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | (add) | 6 V | (add) | (add) | (add) | (add) | (add) | Futaba J | (add) | (add) | — | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Traxxas | 2090 | Hobby | 6.0V 285.0 oz-in20.52 kg-cm2.0 N-m | (add) | (add) | 2.47 oz70.0 g | (add) | — | Unknown | (add) | Brushed | (add) | Nylon | 25 | Single Bearing | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | (add) | 6 V | (add) | (add) | (add) | (add) | (add) | Futaba J | (add) | (add) | — | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Traxxas | 2250 | Hobby | 6.0V 330.0 oz-in23.76 kg-cm2.3 N-m | 6.0V 0.19 s/60°315.8 deg/s52.6 RPM | (add) | 2.40 oz68.0 g | (add) | — | Unknown | (add) | Coreless | (add) | Steel | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | (add) | 6–7.4 V | (add) | (add) | (add) | (add) | (add) | Futaba J | (add) | (add) | 3.21 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Traxxas | 2255 | Hobby | 6.0V 400.0 oz-in28.80 kg-cm2.8 N-m | 6.0V 0.15 s/60°400.0 deg/s66.7 RPM | (add) | 2.26 oz64.0 g | (add) | — | Unknown | (add) | Brushless | (add) | Steel | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 4.93 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Traxxas | 2275 | Hobby | 6.0V 347.0 oz-in24.99 kg-cm2.5 N-m | (add) | (add) | 2.36 oz67.0 g | 2.17×0.79×1.77 in 55.0×20.0×45.0 mm | — | Large | (add) | Brushed | (add) | Steel | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | (add) | 6–7.4 V | (add) | (add) | (add) | (add) | (add) | Futaba J | (add) | (add) | — | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Traxxas | 2280 | Hobby |
7.4V 705.0 oz-in50.77 kg-cm5.0 N-m 6.0V 580.0 oz-in41.76 kg-cm4.1 N-m |
7.4V 0.09 s/60°666.7 deg/s111.1 RPM 6.0V 0.13 s/60°461.5 deg/s76.9 RPM |
(add) | 2.26 oz64.0 g | (add) | — | Unknown | (add) | Brushless | (add) | Steel | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | (add) | 6–7.4 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 8.25–14.48 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Trinity | HT-1980 | Hobby |
8.4V 264.0 oz-in19.01 kg-cm1.9 N-m 7.4V 250.0 oz-in18.00 kg-cm1.8 N-m 6.0V 222.0 oz-in15.99 kg-cm1.6 N-m |
8.4V 0.07 s/60°821.9 deg/s137.0 RPM 7.4V 0.08 s/60°722.9 deg/s120.5 RPM 6.0V 0.10 s/60°631.6 deg/s105.3 RPM |
(add) | 2.19 oz62.0 g | 1.61×0.80×1.04 in 40.8×20.2×26.5 mm | — | Low Profile | Aluminum | Brushless | (add) | Titanium / Steel | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 6–8.4 V | (add) | (add) | -15–65.5556°C5.0–150.0°F | (add) | (add) | (add) | 100 mm3.94 in | (add) | 4.32–6.69 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turborix | 05 * | Hobby | 4.8V 125.0 oz-in9.00 kg-cm0.9 N-m | 4.8V 0.18 s/60°333.3 deg/s55.6 RPM | (add) | 1.83 oz52.0 g | 0.80×1.63×1.60 in 20.3×41.4×40.6 mm | — | Standard | (add) | (add) | (add) | Metal | (add) | Single Bearing | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 1.28 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turborix | MG995 * | Hobby |
6.0V 209.0 oz-in15.05 kg-cm1.5 N-m 4.8V 181.0 oz-in13.03 kg-cm1.3 N-m |
6.0V 0.13 s/60°461.5 deg/s76.9 RPM 4.8V 0.17 s/60°352.9 deg/s58.8 RPM |
(add) | 1.98 oz56.0 g | 1.57×0.75×1.69 in 39.9×19.0×42.9 mm | — | Standard | (add) | 3-pole | (add) | Plastic | (add) | Dual Bearings | (add) | (add) | 180° | (add) | 20 ms | 600–2000 µs | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 1.97–2.97 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | 620DMG+HS | Hobby | 6.0V 147.2 oz-in10.60 kg-cm1.0 N-m | 4.8V 0.13 s/60°461.5 deg/s76.9 RPM | (add) | 1.83 oz52.0 g | 1.59×0.79×1.65 in 40.5×20.0×42.0 mm | — | Standard | (add) | Brushed | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | — | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | BLS950 * | Hobby |
6.0V 159.7 oz-in11.50 kg-cm1.1 N-m 4.8V 127.8 oz-in9.20 kg-cm0.9 N-m |
6.0V 0.12 s/60°500.0 deg/s83.3 RPM 4.8V 0.14 s/60°428.6 deg/s71.4 RPM |
(add) | 1.97 oz55.8 g | 1.58×0.79×1.58 in 40.0×20.0×40.0 mm | — | Standard | (add) | Brushless | (add) | Titanium | (add) | Dual Bearings | Digital | (add) | (add) | (add) | 8 ms | (add) | 1520 µs | 8 µs | 333 Hz | (add) | (add) | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 1.69–2.46 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | BLS980 * | Hobby |
6.0V 43.1 oz-in3.10 kg-cm0.3 N-m 4.8V 34.7 oz-in2.50 kg-cm0.2 N-m |
6.0V 0.03 s/60°2,000.0 deg/s333.3 RPM 4.8V 0.04 s/60°1,500.0 deg/s250.0 RPM |
≤2.3 A≤2300 mA | 2.48 oz70.3 g | 1.58×0.79×1.58 in 40.0×20.0×40.0 mm | — | Standard | (add) | Brushless | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | 4 ms | (add) | 760 µs | 4 µs | 560 Hz | (add) | (add) | (add) | 6–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 1.60–2.65 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | HV-300 * | Hobby |
12.0V 533.3 oz-in38.40 kg-cm3.8 N-m 8.4V 373.6 oz-in26.90 kg-cm2.6 N-m |
12.0V 0.13 s/60°461.5 deg/s76.9 RPM 8.4V 0.18 s/60°333.3 deg/s55.6 RPM |
(add) | 2.79 oz79.0 g | 1.58×0.79×1.77 in 40.0×20.0×45.0 mm | — | Standard | (add) | Coreless | (add) | Titanium | (add) | Dual Bearings | Digital | (add) | (add) | (add) | 8 ms | (add) | (add) | 1 µs | (add) | (add) | (add) | (add) | 8.4–12 V | (add) | (add) | -10–60°C14.0–140.0°F | (add) | (add) | JR (Universal) | 150 mm5.91 in | (add) | 3.84–7.58 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | HV-380 * | Hobby |
12.0V 144.4 oz-in10.40 kg-cm1.0 N-m 8.4V 101.4 oz-in7.30 kg-cm0.7 N-m |
12.0V 0.03 s/60°2,000.0 deg/s333.3 RPM 8.4V 0.04 s/60°1,500.0 deg/s250.0 RPM |
(add) | 2.79 oz79.0 g | 1.58×0.79×1.77 in 40.0×20.0×45.0 mm | — | Standard | (add) | Coreless | (add) | Titanium | (add) | Dual Bearings | Digital | (add) | (add) | (add) | 8 ms | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 12 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 4.69–8.90 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | HV-767 * | Hobby |
7.4V 430.5 oz-in31.00 kg-cm3.0 N-m 6.0V 347.2 oz-in25.00 kg-cm2.5 N-m |
7.4V 0.12 s/60°508.5 deg/s84.7 RPM 6.0V 0.15 s/60°413.8 deg/s69.0 RPM |
(add) | 2.75 oz77.9 g | 1.58×0.79×1.77 in 40.0×20.0×45.0 mm | — | Standard | (add) | Coreless | (add) | Titanium | (add) | Dual Bearings | Digital | (add) | (add) | (add) | 8 ms | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 4.43–6.75 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | TGY-1501MG | Hobby |
6.0V 236.1 oz-in17.00 kg-cm1.7 N-m 4.8V 215.3 oz-in15.50 kg-cm1.5 N-m |
6.0V 0.14 s/60°428.6 deg/s71.4 RPM 4.8V 0.16 s/60°375.0 deg/s62.5 RPM |
(add) | 2.22 oz63.0 g | 1.60×0.81×1.56 in 40.7×20.5×39.5 mm | — | Standard | (add) | Brushed | (add) | Metal | 25 | Dual Bearings | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 2.49–3.12 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | TGY-9150MG * | Hobby | 4.8V 219.4 oz-in15.80 kg-cm1.5 N-m | 4.8V 0.17 s/60°352.9 deg/s58.8 RPM | (add) | 2.12 oz60.0 g | 1.58×0.79×1.46 in 40.0×20.0×37.0 mm | — | Standard | (add) | (add) | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 4.5–7.2 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 2.39 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | TGY-AN13 | Hobby |
6.0V 201.3 oz-in14.49 kg-cm1.4 N-m 4.8V 183.2 oz-in13.19 kg-cm1.3 N-m |
6.0V 0.13 s/60°461.5 deg/s76.9 RPM 4.8V 0.15 s/60°400.0 deg/s66.7 RPM |
(add) | 2.05 oz58.0 g | 1.57×0.79×1.48 in 40.0×20.0×37.5 mm | — | Standard | (add) | Brushless | (add) | Titanium | 25 | (add) | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 2.26–2.86 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | TGY-MG958 * | Hobby |
6.0V 200.0 oz-in14.40 kg-cm1.4 N-m 4.8V 166.0 oz-in11.95 kg-cm1.2 N-m |
4.8V 0.20 s/60°300.0 deg/s50.0 RPM | ≤1.6 A≤1600 mA | 2.29 oz65.0 g | 1.58×0.79×1.45 in 40.2×20.1×36.8 mm | — | Standard | (add) | Coreless | (add) | Metal | (add) | Dual Bearings | Digital | (add) | 45° | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 4.8–6.6 V | (add) | (add) | ≤55°C≤131.0°F | (add) | (add) | JR (Universal) | 320 mm12.60 in | (add) | 1.53 W | — | — | — | — | — | — | — | — | — | (add) | (add) | 10.000 A10,000 mA | — | — | ||
| Turnigy | TGY-MG959 * | Hobby |
6.0V 200.0 oz-in14.40 kg-cm1.4 N-m 4.8V 166.0 oz-in11.95 kg-cm1.2 N-m |
4.8V 0.20 s/60°300.0 deg/s50.0 RPM | (add) | 2.75 oz78.0 g | 1.58×0.79×1.45 in 40.2×20.1×36.8 mm | — | Standard | (add) | Coreless | (add) | Metal | 25 | Dual Bearings | Digital | (add) | 45° | (add) | (add) | (add) | 1520 µs | 1 µs | (add) | (add) | (add) | (add) | 4.8–6 V | (add) | (add) | -20–60°C-4.0–140.0°F | (add) | (add) | JR (Universal) | 320 mm12.60 in | (add) | 1.53 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | TGY-S8166M * | Hobby | 6.0V 458.3 oz-in33.00 kg-cm3.2 N-m | 6.0V 0.21 s/60°285.7 deg/s47.6 RPM | ≤3.8 A≤3800 mA | 5.43 oz154.0 g | 2.95×1.06×2.32 in 74.9×26.9×58.9 mm | — | Giant | (add) | (add) | (add) | Metal | (add) | Dual Bearings | Analog | (add) | 60° | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | (add) | 6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 4.04 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Unitree | A1 Motor | Robotics | 40.0V 4,744.0 oz-in341.60 kg-cm33.5 N-m | 40.0V 0.05 s/60°1,203.1 deg/s200.5 RPM | 20–40 A20000–40000 mA | 21.34 oz605.0 g | 3.15×—×— in80.0×—×— mm | 80.0 mm3.15 in | Custom | Aluminum | Brushless | FET | Steel | (add) | Dual Bearings | Digital | Bidirectional | (add) | (add) | (add) | (add) | (add) | 1 µs | 1000 Hz | Magnetic Encoder | RS485 | Yes | 20–40 V | External | (add) | -10–60°C14.0–140.0°F | IP67 | CE | (add) | 300 mm11.81 in | (add) | — | Cylindrical | 10.0 mm | 32,768 p/r | 9.100 | 4.8 Mbps | 500.0 W | 500.0 N | STM32 | Position, Velocity, Torque | (add) | (add) | 200.000 A200,000 mA | 0.050° | 5V | ||
Make: Traxxas
Stall Current: (add)
Shaft Power: 1.36 W
Weight: 2.01 oz57.0 g
Size Class: Large
Diameter: —
Dimensions: 2.17×0.85×1.69 in 55.1×21.6×42.9 mm
Case Material: Aluminum / Plastic
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: Waterproof
Certification: (add)
Connector: Futaba J
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Traxxas
Stall Current: (add)
Shaft Power: —
Weight: 3.67 oz104.0 g
Size Class: Unknown
Diameter: —
Dimensions: (add)
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: Futaba J
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Traxxas
Stall Current: (add)
Shaft Power: 9.25 W
Weight: 4.41 oz125.0 g
Size Class: Unknown
Diameter: —
Dimensions: (add)
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: Futaba J
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Traxxas
Stall Current: (add)
Shaft Power: —
Weight: 4.41 oz125.0 g
Size Class: Unknown
Diameter: —
Dimensions: (add)
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: Futaba J
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Traxxas
Stall Current: (add)
Shaft Power: —
Weight: 2.47 oz70.0 g
Size Class: Unknown
Diameter: —
Dimensions: (add)
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Nylon
Gear Spline/Teeth: 25
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: Futaba J
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Traxxas
Stall Current: (add)
Shaft Power: 3.21 W
Weight: 2.40 oz68.0 g
Size Class: Unknown
Diameter: —
Dimensions: (add)
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6–7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: Futaba J
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Traxxas
Stall Current: (add)
Shaft Power: 4.93 W
Weight: 2.26 oz64.0 g
Size Class: Unknown
Diameter: —
Dimensions: (add)
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Traxxas
Stall Current: (add)
Shaft Power: —
Weight: 2.36 oz67.0 g
Size Class: Large
Diameter: —
Dimensions: 2.17×0.79×1.77 in 55.0×20.0×45.0 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6–7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: Futaba J
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Traxxas
Stall Current: (add)
Shaft Power: 8.25–14.48 W
Weight: 2.26 oz64.0 g
Size Class: Unknown
Diameter: —
Dimensions: (add)
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6–7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Trinity
Stall Current: (add)
Shaft Power: 4.32–6.69 W
Weight: 2.19 oz62.0 g
Size Class: Low Profile
Diameter: —
Dimensions: 1.61×0.80×1.04 in 40.8×20.2×26.5 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Titanium / Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -15–65.5556°C5.0–150.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: 100 mm3.94 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turborix
Stall Current: (add)
Shaft Power: 1.28 W
Weight: 1.83 oz52.0 g
Size Class: Standard
Diameter: —
Dimensions: 0.80×1.63×1.60 in 20.3×41.4×40.6 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Single Bearing
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turborix
Stall Current: (add)
Shaft Power: 1.97–2.97 W
Weight: 1.98 oz56.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.75×1.69 in 39.9×19.0×42.9 mm
Case Material: (add)
Motor Type: 3-pole
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: (add)
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: 20 ms
Pulse Width: 600–2000 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: (add)
Shaft Power: —
Weight: 1.83 oz52.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.79×1.65 in 40.5×20.0×42.0 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: (add)
Shaft Power: 1.69–2.46 W
Weight: 1.97 oz55.8 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.79×1.58 in 40.0×20.0×40.0 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Titanium
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: 8 ms
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: 8 µs
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: ≤2.3 A≤2300 mA
Shaft Power: 1.60–2.65 W
Weight: 2.48 oz70.3 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.79×1.58 in 40.0×20.0×40.0 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: 4 ms
Pulse Width: (add)
Neutral Pos.: 760 µs
Dead Band: 4 µs
Refresh Rate: 560 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: (add)
Shaft Power: 3.84–7.58 W
Weight: 2.79 oz79.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.79×1.77 in 40.0×20.0×45.0 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Titanium
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: 8 ms
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: 1 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 8.4–12 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–60°C14.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 150 mm5.91 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: (add)
Shaft Power: 4.69–8.90 W
Weight: 2.79 oz79.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.79×1.77 in 40.0×20.0×45.0 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Titanium
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: 8 ms
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 12 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: (add)
Shaft Power: 4.43–6.75 W
Weight: 2.75 oz77.9 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.79×1.77 in 40.0×20.0×45.0 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Titanium
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: 8 ms
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: (add)
Shaft Power: 2.49–3.12 W
Weight: 2.22 oz63.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.60×0.81×1.56 in 40.7×20.5×39.5 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: (add)
Shaft Power: 2.39 W
Weight: 2.12 oz60.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.79×1.46 in 40.0×20.0×37.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.5–7.2 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: (add)
Shaft Power: 2.26–2.86 W
Weight: 2.05 oz58.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.48 in 40.0×20.0×37.5 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Titanium
Gear Spline/Teeth: 25
Rotation: (add)
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: ≤1.6 A≤1600 mA
Shaft Power: 1.53 W
Weight: 2.29 oz65.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.79×1.45 in 40.2×20.1×36.8 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 45°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–6.6 V
Power Source: (add)
Regulator Type: (add)
Temperature: ≤55°C≤131.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 320 mm12.60 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: (add)
Shaft Power: 1.53 W
Weight: 2.75 oz78.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.79×1.45 in 40.2×20.1×36.8 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 45°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: 1 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 320 mm12.60 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: ≤3.8 A≤3800 mA
Shaft Power: 4.04 W
Weight: 5.43 oz154.0 g
Size Class: Giant
Diameter: —
Dimensions: 2.95×1.06×2.32 in 74.9×26.9×58.9 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: 60°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Unitree
Stall Current: 20–40 A20000–40000 mA
Shaft Power: —
Weight: 21.34 oz605.0 g
Size Class: Custom
Diameter: 80.0 mm3.15 in
Dimensions: (add)
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: FET
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: Bidirectional
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: 1 µs
Refresh Rate: 1000 Hz
Angle Sensor: Magnetic Encoder
Control System: RS485
Programmable: Yes
Op. Voltage: 20–40 V
Power Source: External
Regulator Type: (add)
Temperature: -10–60°C14.0–140.0°F
Water Rating: IP67
Certification: CE
Connector: (add)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: Cylindrical
Shaft Size: 10.0 mm
Resolution: 32,768 p/r
Gear Ratio: 9.100
Baud Rate: 4.8 Mbps
Output Power: 500.0 W
Radial Load: 500.0 N
MCU: STM32
Operating Modes: Position, Velocity, Torque
Quick Tips
- Models with an asterisk (*) have been discontinued.
- Click on any servo model name to see more details about that product.
- Click on any brand name to filter all servos for that brand.
- In the desktop view, click on any column header to sort the table by that attribute. Click again to reverse the order.
Compare Prices for
Unable to load results. Please try again.