Discover XQ-Power Servos in Our eBay Store!
Shop NowTheta Servos (22)
Performance
Physical
Drivetrain
Control & Signal
Electrical & Environment
Connectivity
Origin
Preferences are saved automatically.
| Make | Model | Category | Torque | Speed | Stall Current |
Weight | Dimensions (L×W×H) |
Diameter | Size Class |
Case Material |
Motor Type |
Motor Drive |
Gear Material |
Gear Spline/ Teeth |
Rotation | Modulation | Direction | Op. Range |
Mech. Limit |
Pulse Cycle |
Pulse Width |
Neutral Pos. |
Dead Band |
Refresh Rate |
Angle Sensor |
Control System |
Programmable | Op. Voltage |
Power Source |
Regulator Type |
Temperature | Water Rating |
Certification | Connector | Wire Length |
Country of Origin |
Shaft Power |
Shape | Shaft Size |
Resolution | Gear Ratio |
Baud Rate |
Output Power |
Radial Load |
MCU | Operating Modes |
Running Current |
Rotation Mode |
Idle Current |
Backlash | Signal Voltage |
Compare | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| We may earn a commission from your purchase. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Theta | Razor-C1 | Hobby |
8.4V 499.9 oz-in36.00 kg-cm3.5 N-m 7.4V 472.2 oz-in34.00 kg-cm3.3 N-m 6.0V 375.0 oz-in27.00 kg-cm2.6 N-m 5.0V 319.4 oz-in23.00 kg-cm2.3 N-m |
8.4V 0.06 s/60°1,000.0 deg/s166.7 RPM 7.4V 0.07 s/60°845.1 deg/s140.8 RPM 6.0V 0.08 s/60°714.3 deg/s119.0 RPM 5.0V 0.11 s/60°555.6 deg/s92.6 RPM |
≤2.6 A≤2600 mA | 2.57 oz73.0 g | 1.57×0.79×1.50 in 39.9×20.1×38.1 mm | — | Standard | Aluminum | Brushless | (add) | Metal | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | 500–2500 µs | 1520 µs | (add) | 400 Hz | Magnetic Encoder | PWM | Yes | 5–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 320 mm12.60 in | (add) | — | Boxed | — | — | — | — | — | — | — | — | (add) | Standard | (add) | — | — | ||
| Theta | Razor-D1 | Hobby |
8.4V 222.2 oz-in16.00 kg-cm1.6 N-m 7.4V 208.3 oz-in15.00 kg-cm1.5 N-m 6.0V 187.5 oz-in13.50 kg-cm1.3 N-m 5.0V 166.6 oz-in12.00 kg-cm1.2 N-m |
8.4V 0.07 s/60°857.1 deg/s142.9 RPM 7.4V 0.08 s/60°750.0 deg/s125.0 RPM 6.0V 0.09 s/60°666.7 deg/s111.1 RPM 5.0V 0.11 s/60°555.6 deg/s92.6 RPM |
≤3 A≤3000 mA | 1.87 oz53.0 g | 1.61×0.81×1.06 in 40.9×20.6×26.9 mm | — | Low Profile | Aluminum | Brushless | (add) | Metal | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | 500–2500 µs | 1520 µs | (add) | 400 Hz | Magnetic Encoder | PWM | Yes | 5–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 200 mm7.87 in | (add) | — | Boxed | — | — | — | — | — | — | — | — | (add) | Standard | (add) | — | — | ||
| Theta | Razor-DH1 | Hobby |
8.4V 416.6 oz-in30.00 kg-cm2.9 N-m 7.4V 388.8 oz-in28.00 kg-cm2.7 N-m 6.0V 361.1 oz-in26.00 kg-cm2.5 N-m 5.0V 333.3 oz-in24.00 kg-cm2.4 N-m |
8.4V 0.07 s/60°857.1 deg/s142.9 RPM 7.4V 0.08 s/60°750.0 deg/s125.0 RPM 6.0V 0.09 s/60°666.7 deg/s111.1 RPM 5.0V 0.11 s/60°555.6 deg/s92.6 RPM |
≤3 A≤3000 mA | 2.12 oz60.0 g | 1.61×0.81×1.16 in 40.9×20.6×29.5 mm | — | Standard | Aluminum | Brushless | (add) | Metal | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | 500–2500 µs | 1520 µs | (add) | 400 Hz | Magnetic Encoder | PWM | Yes | 5–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 300 mm11.81 in | (add) | — | Boxed | — | — | — | — | — | — | — | — | (add) | Standard | (add) | — | — | ||
| Theta | Razor-DT1 | Hobby |
8.4V 180.5 oz-in13.00 kg-cm1.3 N-m 7.4V 166.6 oz-in12.00 kg-cm1.2 N-m 6.0V 152.8 oz-in11.00 kg-cm1.1 N-m 5.0V 138.9 oz-in10.00 kg-cm1.0 N-m |
8.4V 0.06 s/60°1,071.4 deg/s178.6 RPM 7.4V 0.06 s/60°937.5 deg/s156.3 RPM 6.0V 0.07 s/60°833.3 deg/s138.9 RPM 5.0V 0.09 s/60°689.7 deg/s114.9 RPM |
≤3 A≤3000 mA | 1.87 oz53.0 g | 1.61×0.81×1.06 in 40.9×20.6×26.9 mm | — | Low Profile | Aluminum | Brushless | (add) | Metal | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | 500–2500 µs | 1520 µs | (add) | 400 Hz | Magnetic Encoder | PWM | Yes | 5–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 200 mm7.87 in | (add) | — | Boxed | — | — | — | — | — | — | — | — | (add) | Standard | (add) | — | — | ||
| Theta | Razor-T1 | Hobby |
8.4V 277.7 oz-in20.00 kg-cm2.0 N-m 7.4V 263.9 oz-in19.00 kg-cm1.9 N-m 6.0V 250.0 oz-in18.00 kg-cm1.8 N-m 5.0V 236.1 oz-in17.00 kg-cm1.7 N-m |
8.4V 0.04 s/60°1,428.6 deg/s238.1 RPM 7.4V 0.05 s/60°1,276.6 deg/s212.8 RPM 6.0V 0.05 s/60°1,111.1 deg/s185.2 RPM 5.0V 0.06 s/60°967.7 deg/s161.3 RPM |
≤2.6 A≤2600 mA | 2.57 oz73.0 g | 1.57×0.79×1.50 in 39.9×20.1×38.1 mm | — | Standard | Aluminum | Brushless | (add) | Metal | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | 500–2500 µs | 1520 µs | (add) | 400 Hz | Magnetic Encoder | PWM | Yes | 5–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 320 mm12.60 in | (add) | — | Boxed | — | — | — | — | — | — | — | — | (add) | Standard | (add) | — | — | ||
| Theta | Razor-TH1 | Hobby |
8.4V 333.3 oz-in24.00 kg-cm2.4 N-m 7.4V 319.4 oz-in23.00 kg-cm2.3 N-m 6.0V 291.6 oz-in21.00 kg-cm2.1 N-m 5.0V 263.9 oz-in19.00 kg-cm1.9 N-m |
8.4V 0.06 s/60°1,071.4 deg/s178.6 RPM 7.4V 0.06 s/60°937.5 deg/s156.3 RPM 6.0V 0.07 s/60°833.3 deg/s138.9 RPM 5.0V 0.09 s/60°689.7 deg/s114.9 RPM |
≤3 A≤3000 mA | 2.12 oz60.0 g | 1.61×0.81×1.16 in 40.9×20.6×29.5 mm | — | Standard | Aluminum | Brushless | (add) | Metal | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | 500–2500 µs | 1520 µs | (add) | 400 Hz | Magnetic Encoder | PWM | Yes | 5–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 300 mm11.81 in | (add) | — | Boxed | — | — | — | — | — | — | — | — | (add) | Standard | (add) | — | — | ||
| Theta | Razor-X1W | Hobby |
8.4V 722.1 oz-in52.00 kg-cm5.1 N-m 7.4V 652.7 oz-in47.00 kg-cm4.6 N-m 6.0V 583.3 oz-in42.00 kg-cm4.1 N-m 5.0V 513.8 oz-in37.00 kg-cm3.6 N-m |
8.4V 0.12 s/60°500.0 deg/s83.3 RPM 7.4V 0.13 s/60°461.5 deg/s76.9 RPM 6.0V 0.14 s/60°428.6 deg/s71.4 RPM 5.0V 0.16 s/60°375.0 deg/s62.5 RPM |
≤8 A≤8000 mA | 2.57 oz73.0 g | 1.57×0.79×1.50 in 39.9×20.1×38.1 mm | — | Standard | Aluminum | Brushless | (add) | Metal | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | 500–2500 µs | 1520 µs | (add) | 400 Hz | Magnetic Encoder | PWM | Yes | 5–8.4 V | (add) | (add) | (add) | IP67 | (add) | JR (Universal) | 320 mm12.60 in | (add) | — | Boxed | — | — | — | — | — | — | — | — | (add) | Standard | (add) | — | — | ||
| Theta | Sabre-C1 | Hobby |
8.4V 208.3 oz-in15.00 kg-cm1.5 N-m 7.4V 194.4 oz-in14.00 kg-cm1.4 N-m 6.0V 166.6 oz-in12.00 kg-cm1.2 N-m 5.0V 138.9 oz-in10.00 kg-cm1.0 N-m |
8.4V 0.07 s/60°857.1 deg/s142.9 RPM 7.4V 0.08 s/60°750.0 deg/s125.0 RPM 6.0V 0.09 s/60°666.7 deg/s111.1 RPM 5.0V 0.10 s/60°600.0 deg/s100.0 RPM |
≤2.3 A≤2300 mA | 1.62 oz46.0 g | 1.40×0.59×1.22 in 35.6×15.0×31.0 mm | — | Mini | Aluminum | Brushless | (add) | Metal | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | 500–2500 µs | 1520 µs | (add) | 400 Hz | Magnetic Encoder | PWM | Yes | 5–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 300 mm11.81 in | (add) | — | Boxed | — | — | — | — | — | — | — | — | (add) | Standard | (add) | — | — | ||
| Theta | Sabre-T1 | Hobby |
8.4V 125.0 oz-in9.00 kg-cm0.9 N-m 7.4V 111.1 oz-in8.00 kg-cm0.8 N-m 6.0V 97.2 oz-in7.00 kg-cm0.7 N-m 5.0V 83.3 oz-in6.00 kg-cm0.6 N-m |
8.4V 0.05 s/60°1,200.0 deg/s200.0 RPM 7.4V 0.06 s/60°1,000.0 deg/s166.7 RPM 6.0V 0.07 s/60°857.1 deg/s142.9 RPM 5.0V 0.08 s/60°750.0 deg/s125.0 RPM |
≤2.3 A≤2300 mA | 1.62 oz46.0 g | 1.40×0.59×1.22 in 35.6×15.0×31.0 mm | — | Mini | Aluminum | Brushless | (add) | Metal | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | 500–2500 µs | 1520 µs | (add) | 400 Hz | Magnetic Encoder | PWM | Yes | 5–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 300 mm11.81 in | (add) | — | Boxed | — | — | — | — | — | — | — | — | (add) | Standard | (add) | — | — | ||
| Theta | THL398 | Hobby |
8.4V 416.6 oz-in30.00 kg-cm2.9 N-m 7.4V 375.0 oz-in27.00 kg-cm2.6 N-m 6.0V 319.4 oz-in23.00 kg-cm2.3 N-m 5.0V 277.7 oz-in20.00 kg-cm2.0 N-m |
8.4V 0.10 s/60°600.0 deg/s100.0 RPM 7.4V 0.11 s/60°545.5 deg/s90.9 RPM 6.0V 0.12 s/60°500.0 deg/s83.3 RPM 5.0V 0.13 s/60°461.5 deg/s76.9 RPM |
≤3 A≤3000 mA | 2.57 oz73.0 g | 1.57×0.79×1.50 in 39.9×20.1×38.1 mm | — | Standard | Plastic | Brushless | (add) | Metal | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | 500–2500 µs | 1520 µs | (add) | 400 Hz | Magnetic Encoder | PWM | No | 5–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 300 mm11.81 in | (add) | — | Boxed | — | — | — | — | — | — | — | — | (add) | Standard | (add) | — | — | ||
| Theta | THL782 | Hobby |
8.4V 222.2 oz-in16.00 kg-cm1.6 N-m 7.4V 194.4 oz-in14.00 kg-cm1.4 N-m 6.0V 166.6 oz-in12.00 kg-cm1.2 N-m 5.0V 138.9 oz-in10.00 kg-cm1.0 N-m |
8.4V 0.05 s/60°1,333.3 deg/s222.2 RPM 7.4V 0.05 s/60°1,200.0 deg/s200.0 RPM 6.0V 0.06 s/60°1,052.6 deg/s175.4 RPM 5.0V 0.07 s/60°923.1 deg/s153.8 RPM |
≤4 A≤4000 mA | 2.57 oz73.0 g | 1.57×0.79×1.50 in 39.9×20.1×38.1 mm | — | Standard | Aluminum | Brushless | (add) | Metal | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | 500–2500 µs | 760 µs | (add) | 700 Hz | Magnetic Encoder | PWM | No | 5–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 300 mm11.81 in | (add) | — | Boxed | — | — | — | — | — | — | — | — | (add) | Standard | (add) | — | — | ||
| Theta | THL782H | Hobby |
12.6V 263.9 oz-in19.00 kg-cm1.9 N-m 11.1V 236.1 oz-in17.00 kg-cm1.7 N-m 9.0V 194.4 oz-in14.00 kg-cm1.4 N-m 7.5V 166.6 oz-in12.00 kg-cm1.2 N-m |
12.6V 0.05 s/60°1,333.3 deg/s222.2 RPM 11.1V 0.05 s/60°1,200.0 deg/s200.0 RPM 9.0V 0.06 s/60°1,052.6 deg/s175.4 RPM 7.5V 0.07 s/60°923.1 deg/s153.8 RPM |
≤3.3 A≤3300 mA | 2.57 oz73.0 g | 1.57×0.79×1.50 in 39.9×20.1×38.1 mm | — | Standard | Aluminum | Brushless | (add) | Metal | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | 500–2500 µs | 760 µs | (add) | 1000 Hz | Magnetic Encoder | PWM | No | 7.5–12.6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 300 mm11.81 in | (add) | — | Boxed | — | — | — | — | — | — | — | — | (add) | Standard | (add) | — | — | ||
| Theta | THL787H | Hobby |
12.6V 527.7 oz-in38.00 kg-cm3.7 N-m 11.1V 458.3 oz-in33.00 kg-cm3.2 N-m 9.0V 388.8 oz-in28.00 kg-cm2.7 N-m 7.5V 333.3 oz-in24.00 kg-cm2.4 N-m |
12.6V 0.06 s/60°1,000.0 deg/s166.7 RPM 11.1V 0.07 s/60°857.1 deg/s142.9 RPM 9.0V 0.08 s/60°750.0 deg/s125.0 RPM 7.5V 0.09 s/60°666.7 deg/s111.1 RPM |
≤4 A≤4000 mA | 2.57 oz73.0 g | 1.57×0.79×1.50 in 39.9×20.1×38.1 mm | — | Standard | Aluminum | Brushless | (add) | Metal | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | 500–2500 µs | 1520 µs | (add) | 400 Hz | Magnetic Encoder | PWM | No | 7.5–12.6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 300 mm11.81 in | (add) | — | Boxed | — | — | — | — | — | — | — | — | (add) | Standard | (add) | — | — | ||
| Theta | THL788 | Hobby |
8.4V 444.4 oz-in32.00 kg-cm3.1 N-m 7.4V 388.8 oz-in28.00 kg-cm2.7 N-m 6.0V 319.4 oz-in23.00 kg-cm2.3 N-m 5.0V 277.7 oz-in20.00 kg-cm2.0 N-m |
8.4V 0.08 s/60°750.0 deg/s125.0 RPM 7.4V 0.09 s/60°666.7 deg/s111.1 RPM 6.0V 0.10 s/60°600.0 deg/s100.0 RPM 5.0V 0.11 s/60°545.5 deg/s90.9 RPM |
≤4 A≤4000 mA | 2.57 oz73.0 g | 1.57×0.79×1.50 in 39.9×20.1×38.1 mm | — | Standard | Aluminum | Brushless | (add) | Metal | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | 500–2500 µs | 1520 µs | (add) | 400 Hz | Magnetic Encoder | PWM | No | 5–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 300 mm11.81 in | (add) | — | Boxed | — | — | — | — | — | — | — | — | (add) | Standard | (add) | — | — | ||
| Theta | THL798 | Hobby |
8.4V 555.5 oz-in40.00 kg-cm3.9 N-m 7.4V 499.9 oz-in36.00 kg-cm3.5 N-m 6.0V 444.4 oz-in32.00 kg-cm3.1 N-m 5.0V 388.8 oz-in28.00 kg-cm2.7 N-m |
8.4V 0.09 s/60°666.7 deg/s111.1 RPM 7.4V 0.10 s/60°600.0 deg/s100.0 RPM 6.0V 0.11 s/60°545.5 deg/s90.9 RPM 5.0V 0.12 s/60°500.0 deg/s83.3 RPM |
≤8 A≤8000 mA | 2.57 oz73.0 g | 1.57×0.79×1.50 in 39.9×20.1×38.1 mm | — | Standard | Aluminum | Brushless | (add) | Metal | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | 500–2500 µs | 1520 µs | (add) | 400 Hz | Magnetic Encoder | PWM | No | 5–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 300 mm11.81 in | (add) | — | Boxed | — | — | — | — | — | — | — | — | (add) | Standard | (add) | — | — | ||
| Theta | THL798W | Hobby |
8.4V 555.5 oz-in40.00 kg-cm3.9 N-m 7.4V 499.9 oz-in36.00 kg-cm3.5 N-m 6.0V 444.4 oz-in32.00 kg-cm3.1 N-m 5.0V 388.8 oz-in28.00 kg-cm2.7 N-m |
8.4V 0.09 s/60°666.7 deg/s111.1 RPM 7.4V 0.10 s/60°600.0 deg/s100.0 RPM 6.0V 0.11 s/60°545.5 deg/s90.9 RPM 5.0V 0.12 s/60°500.0 deg/s83.3 RPM |
≤8 A≤8000 mA | 2.57 oz73.0 g | 1.57×0.79×1.50 in 39.9×20.1×38.1 mm | — | Standard | Aluminum | Brushless | (add) | Metal | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | 500–2500 µs | 1520 µs | (add) | 400 Hz | Magnetic Encoder | PWM | No | 5–8.4 V | (add) | (add) | (add) | IP67 | (add) | JR (Universal) | 300 mm11.81 in | (add) | — | Boxed | — | — | — | — | — | — | — | — | (add) | Standard | (add) | — | — | ||
| Theta | THM388 | Hobby |
8.4V 152.8 oz-in11.00 kg-cm1.1 N-m 7.4V 138.9 oz-in10.00 kg-cm1.0 N-m 6.6V 125.0 oz-in9.00 kg-cm0.9 N-m |
8.4V 0.07 s/60°857.1 deg/s142.9 RPM 7.4V 0.08 s/60°750.0 deg/s125.0 RPM 6.6V 0.09 s/60°666.7 deg/s111.1 RPM |
≤3 A≤3000 mA | 1.62 oz46.0 g | 1.40×0.59×1.22 in 35.6×15.0×31.0 mm | — | Mini | Aluminum | Brushless | (add) | Plastic | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | 500–2500 µs | 1520 µs | (add) | 400 Hz | Magnetic Encoder | PWM | No | 6.6–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 300 mm11.81 in | (add) | 2.57–4.04 W | Boxed | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Theta | THM982 | Hobby |
8.4V 125.0 oz-in9.00 kg-cm0.9 N-m 7.4V 111.1 oz-in8.00 kg-cm0.8 N-m 6.0V 97.2 oz-in7.00 kg-cm0.7 N-m 5.0V 83.3 oz-in6.00 kg-cm0.6 N-m |
8.4V 0.05 s/60°1,200.0 deg/s200.0 RPM 7.4V 0.06 s/60°1,000.0 deg/s166.7 RPM 6.0V 0.07 s/60°857.1 deg/s142.9 RPM 5.0V 0.08 s/60°750.0 deg/s125.0 RPM |
≤2.3 A≤2300 mA | 1.62 oz46.0 g | 1.40×0.59×1.22 in 35.6×15.0×31.0 mm | — | Mini | Aluminum | Brushless | (add) | Metal | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | 500–2500 µs | 1520 µs | (add) | 400 Hz | Magnetic Encoder | PWM | No | 5–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 300 mm11.81 in | (add) | — | Boxed | — | — | — | — | — | — | — | — | (add) | Standard | (add) | — | — | ||
| Theta | THM988 | Hobby |
8.4V 208.3 oz-in15.00 kg-cm1.5 N-m 7.4V 194.4 oz-in14.00 kg-cm1.4 N-m 6.0V 166.6 oz-in12.00 kg-cm1.2 N-m 5.0V 138.9 oz-in10.00 kg-cm1.0 N-m |
8.4V 0.07 s/60°857.1 deg/s142.9 RPM 7.4V 0.08 s/60°750.0 deg/s125.0 RPM 6.0V 0.09 s/60°666.7 deg/s111.1 RPM 5.0V 0.10 s/60°600.0 deg/s100.0 RPM |
≤2.3 A≤2300 mA | 1.62 oz46.0 g | 1.40×0.59×1.22 in 35.6×15.0×31.0 mm | — | Mini | Aluminum | Brushless | (add) | Metal | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | 500–2500 µs | 1520 µs | (add) | 400 Hz | Magnetic Encoder | PWM | No | 5–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 300 mm11.81 in | (add) | — | Boxed | — | — | — | — | — | — | — | — | (add) | Standard | (add) | — | — | ||
| Theta | THM989 | Hobby |
8.4V 319.4 oz-in23.00 kg-cm2.3 N-m 7.4V 291.6 oz-in21.00 kg-cm2.1 N-m 6.0V 250.0 oz-in18.00 kg-cm1.8 N-m 5.0V 208.3 oz-in15.00 kg-cm1.5 N-m |
8.4V 0.07 s/60°857.1 deg/s142.9 RPM 7.4V 0.08 s/60°750.0 deg/s125.0 RPM 6.0V 0.09 s/60°666.7 deg/s111.1 RPM 5.0V 0.10 s/60°600.0 deg/s100.0 RPM |
≤2.6 A≤2600 mA | 1.62 oz46.0 g | 1.40×0.59×1.22 in 35.6×15.0×31.0 mm | — | Mini | Aluminum | Brushless | (add) | Metal | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | 500–2500 µs | 1520 µs | (add) | 400 Hz | Magnetic Encoder | PWM | No | 5–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 300 mm11.81 in | (add) | — | Boxed | — | — | — | — | — | — | — | — | (add) | Standard | (add) | — | — | ||
| Theta | THS921A | Hobby |
8.4V 104.2 oz-in7.50 kg-cm0.7 N-m 7.4V 94.4 oz-in6.80 kg-cm0.7 N-m 6.0V 80.5 oz-in5.80 kg-cm0.6 N-m |
8.4V 0.08 s/60°750.0 deg/s125.0 RPM 7.4V 0.09 s/60°666.7 deg/s111.1 RPM 6.0V 0.11 s/60°545.5 deg/s90.9 RPM |
≤1.7 A≤1700 mA | 0.74 oz21.0 g | 0.91×0.47×1.08 in 23.1×11.9×27.4 mm | — | Micro | Aluminum | Coreless | (add) | Metal | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | 500–2500 µs | 1520 µs | (add) | 400 Hz | Magnetic Encoder | PWM | No | 6–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 190 mm7.48 in | (add) | — | Boxed | 4.9 mm | — | — | — | — | — | — | — | (add) | Standard | (add) | — | — | ||
| Theta | THS921B | Hobby |
8.4V 136.1 oz-in9.80 kg-cm1.0 N-m 7.4V 123.6 oz-in8.90 kg-cm0.9 N-m 6.0V 106.9 oz-in7.70 kg-cm0.8 N-m |
8.4V 0.08 s/60°750.0 deg/s125.0 RPM 7.4V 0.09 s/60°666.7 deg/s111.1 RPM 6.0V 0.10 s/60°600.0 deg/s100.0 RPM |
(add) | 0.74 oz21.0 g | 0.91×0.47×1.08 in 23.1×11.9×27.4 mm | — | Micro | Aluminum | Brushless | (add) | Metal | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | 500–2500 µs | 1520 µs | (add) | 400 Hz | Magnetic Encoder | PWM | No | 6–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 190 mm7.48 in | (add) | — | Boxed | 4.9 mm | — | — | — | — | — | — | — | (add) | Standard | (add) | — | — | ||
Make: Theta
Stall Current: ≤2.6 A≤2600 mA
Shaft Power: —
Weight: 2.57 oz73.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.50 in 39.9×20.1×38.1 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 400 Hz
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: Yes
Op. Voltage: 5–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 320 mm12.60 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Theta
Stall Current: ≤3 A≤3000 mA
Shaft Power: —
Weight: 1.87 oz53.0 g
Size Class: Low Profile
Diameter: —
Dimensions: 1.61×0.81×1.06 in 40.9×20.6×26.9 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 400 Hz
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: Yes
Op. Voltage: 5–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 200 mm7.87 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Theta
Stall Current: ≤3 A≤3000 mA
Shaft Power: —
Weight: 2.12 oz60.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.61×0.81×1.16 in 40.9×20.6×29.5 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 400 Hz
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: Yes
Op. Voltage: 5–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Theta
Stall Current: ≤3 A≤3000 mA
Shaft Power: —
Weight: 1.87 oz53.0 g
Size Class: Low Profile
Diameter: —
Dimensions: 1.61×0.81×1.06 in 40.9×20.6×26.9 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 400 Hz
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: Yes
Op. Voltage: 5–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 200 mm7.87 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Theta
Stall Current: ≤2.6 A≤2600 mA
Shaft Power: —
Weight: 2.57 oz73.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.50 in 39.9×20.1×38.1 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 400 Hz
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: Yes
Op. Voltage: 5–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 320 mm12.60 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Theta
Stall Current: ≤3 A≤3000 mA
Shaft Power: —
Weight: 2.12 oz60.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.61×0.81×1.16 in 40.9×20.6×29.5 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 400 Hz
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: Yes
Op. Voltage: 5–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Theta
Stall Current: ≤8 A≤8000 mA
Shaft Power: —
Weight: 2.57 oz73.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.50 in 39.9×20.1×38.1 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 400 Hz
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: Yes
Op. Voltage: 5–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: IP67
Certification: (add)
Connector: JR (Universal)
Wire Length: 320 mm12.60 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Theta
Stall Current: ≤2.3 A≤2300 mA
Shaft Power: —
Weight: 1.62 oz46.0 g
Size Class: Mini
Diameter: —
Dimensions: 1.40×0.59×1.22 in 35.6×15.0×31.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 400 Hz
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: Yes
Op. Voltage: 5–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Theta
Stall Current: ≤2.3 A≤2300 mA
Shaft Power: —
Weight: 1.62 oz46.0 g
Size Class: Mini
Diameter: —
Dimensions: 1.40×0.59×1.22 in 35.6×15.0×31.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 400 Hz
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: Yes
Op. Voltage: 5–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Theta
Stall Current: ≤3 A≤3000 mA
Shaft Power: —
Weight: 2.57 oz73.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.50 in 39.9×20.1×38.1 mm
Case Material: Plastic
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 400 Hz
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: No
Op. Voltage: 5–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Theta
Stall Current: ≤4 A≤4000 mA
Shaft Power: —
Weight: 2.57 oz73.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.50 in 39.9×20.1×38.1 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 760 µs
Dead Band: (add)
Refresh Rate: 700 Hz
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: No
Op. Voltage: 5–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Theta
Stall Current: ≤3.3 A≤3300 mA
Shaft Power: —
Weight: 2.57 oz73.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.50 in 39.9×20.1×38.1 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 760 µs
Dead Band: (add)
Refresh Rate: 1000 Hz
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: No
Op. Voltage: 7.5–12.6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Theta
Stall Current: ≤4 A≤4000 mA
Shaft Power: —
Weight: 2.57 oz73.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.50 in 39.9×20.1×38.1 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 400 Hz
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: No
Op. Voltage: 7.5–12.6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Theta
Stall Current: ≤4 A≤4000 mA
Shaft Power: —
Weight: 2.57 oz73.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.50 in 39.9×20.1×38.1 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 400 Hz
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: No
Op. Voltage: 5–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Theta
Stall Current: ≤8 A≤8000 mA
Shaft Power: —
Weight: 2.57 oz73.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.50 in 39.9×20.1×38.1 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 400 Hz
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: No
Op. Voltage: 5–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Theta
Stall Current: ≤8 A≤8000 mA
Shaft Power: —
Weight: 2.57 oz73.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.50 in 39.9×20.1×38.1 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 400 Hz
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: No
Op. Voltage: 5–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: IP67
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Theta
Stall Current: ≤3 A≤3000 mA
Shaft Power: 2.57–4.04 W
Weight: 1.62 oz46.0 g
Size Class: Mini
Diameter: —
Dimensions: 1.40×0.59×1.22 in 35.6×15.0×31.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 400 Hz
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: No
Op. Voltage: 6.6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Theta
Stall Current: ≤2.3 A≤2300 mA
Shaft Power: —
Weight: 1.62 oz46.0 g
Size Class: Mini
Diameter: —
Dimensions: 1.40×0.59×1.22 in 35.6×15.0×31.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 400 Hz
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: No
Op. Voltage: 5–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Theta
Stall Current: ≤2.3 A≤2300 mA
Shaft Power: —
Weight: 1.62 oz46.0 g
Size Class: Mini
Diameter: —
Dimensions: 1.40×0.59×1.22 in 35.6×15.0×31.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 400 Hz
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: No
Op. Voltage: 5–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Theta
Stall Current: ≤2.6 A≤2600 mA
Shaft Power: —
Weight: 1.62 oz46.0 g
Size Class: Mini
Diameter: —
Dimensions: 1.40×0.59×1.22 in 35.6×15.0×31.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 400 Hz
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: No
Op. Voltage: 5–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Theta
Stall Current: ≤1.7 A≤1700 mA
Shaft Power: —
Weight: 0.74 oz21.0 g
Size Class: Micro
Diameter: —
Dimensions: 0.91×0.47×1.08 in 23.1×11.9×27.4 mm
Case Material: Aluminum
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 400 Hz
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: No
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 190 mm7.48 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: 4.9 mm
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Theta
Stall Current: (add)
Shaft Power: —
Weight: 0.74 oz21.0 g
Size Class: Micro
Diameter: —
Dimensions: 0.91×0.47×1.08 in 23.1×11.9×27.4 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 400 Hz
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: No
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 190 mm7.48 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: 4.9 mm
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Quick Tips
- Models with an asterisk (*) have been discontinued.
- Click on any servo model name to see more details about that product.
- Click on any brand name to filter all servos for that brand.
- In the desktop view, click on any column header to sort the table by that attribute. Click again to reverse the order.
Compare Prices for
Unable to load results. Please try again.