Discover XQ-Power Servos in Our eBay Store!
Shop NowSearch Matches (5,627)
Performance
Physical
Drivetrain
Control & Signal
Electrical & Environment
Connectivity
Origin
Preferences are saved automatically.
| Make | Model | Category | Torque | Speed | Stall Current |
Weight | Dimensions (L×W×H) |
Diameter | Size Class |
Case Material |
Motor Type |
Motor Drive |
Gear Material |
Gear Spline/ Teeth |
Rotation | Modulation | Direction | Op. Range |
Mech. Limit |
Pulse Cycle |
Pulse Width |
Neutral Pos. |
Dead Band |
Refresh Rate |
Angle Sensor |
Control System |
Programmable | Op. Voltage |
Power Source |
Regulator Type |
Temperature | Water Rating |
Certification | Connector | Wire Length |
Country of Origin |
Shaft Power |
Shape | Shaft Size |
Resolution | Gear Ratio |
Baud Rate |
Output Power |
Radial Load |
MCU | Operating Modes |
Running Current |
Rotation Mode |
Idle Current |
Backlash | Signal Voltage |
Compare | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| We may earn a commission from your purchase. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Graupner | C 4451 * | Hobby | 6.0V 77.9 oz-in5.61 kg-cm0.5 N-m |
6.0V 0.15 s/60°400.0 deg/s66.7 RPM 4.8V 0.15 s/60°400.0 deg/s66.7 RPM |
(add) | 1.48 oz42.0 g | 1.54×0.75×1.57 in 39.0×19.0×40.0 mm | — | Unknown | (add) | (add) | (add) | Plastic | 23 | Dual Bearings | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.96 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | C 4621 * | Hobby | 4.8V 114.0 oz-in8.21 kg-cm0.8 N-m | 4.8V 0.14 s/60°428.6 deg/s71.4 RPM | (add) | 1.83 oz51.9 g | 1.54×0.75×1.57 in 39.0×19.0×40.0 mm | — | Standard | (add) | (add) | (add) | Metal | 23 | Dual Bearings | Analog | (add) | 90° | (add) | 16.67 ms | (add) | 1520 µs | (add) | 60 Hz | Potentiometer | (add) | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 1.51 W | — | (add) | — | — | — | — | — | — | — | 0.009 A @ 6.0V9 mA @ 6.0V | (add) | 0.009 A9 mA | — | — | ||
| Graupner | C 4821 * | Hobby | 4.8V 139.0 oz-in10.01 kg-cm1.0 N-m | 4.8V 0.37 s/60°162.2 deg/s27.0 RPM | (add) | 1.59 oz45.0 g | 1.54×0.75×1.57 in 39.0×19.0×40.0 mm | — | Standard | (add) | (add) | (add) | Plastic | 23 | Dual Bearings | Analog | (add) | (add) | (add) | 16.67 ms | (add) | 1520 µs | (add) | 60 Hz | (add) | (add) | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.69 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | C 4835 * | Hobby |
6.0V 73.6 oz-in5.30 kg-cm0.5 N-m 4.8V 69.4 oz-in5.00 kg-cm0.5 N-m |
4.8V 0.10 s/60°600.0 deg/s100.0 RPM | (add) | 1.62 oz46.0 g | 1.54×0.75×1.57 in 39.0×19.0×40.0 mm | — | Unknown | (add) | (add) | (add) | Plastic | 23 | Dual Bearings | Analog | (add) | (add) | (add) | 16.67 ms | (add) | 1520 µs | (add) | 60 Hz | (add) | (add) | (add) | 6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 1.28 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | C 5077 * | Hobby | 4.8V 70.0 oz-in5.04 kg-cm0.5 N-m | 4.8V 0.12 s/60°500.0 deg/s83.3 RPM | ≤1.01 A≤1010 mA | 1.31 oz37.1 g | 1.54×0.75×1.46 in 39.1×19.0×37.1 mm | — | Standard | (add) | (add) | (add) | Plastic | 23 | Single Bearing | Analog | (add) | 90° | (add) | 20 ms | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 1.08 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | 0.005 A5 mA | — | — | ||
| Graupner | C 5177 * | Hobby | 4.8V 132.0 oz-in9.51 kg-cm0.9 N-m | 4.8V 0.20 s/60°300.0 deg/s50.0 RPM | (add) | 1.59 oz45.1 g | 1.54×0.75×1.57 in 39.1×19.0×39.9 mm | — | Standard | (add) | (add) | (add) | Metal | 23 | (add) | Analog | (add) | 90° | (add) | (add) | (add) | (add) | (add) | (add) | Potentiometer | (add) | Yes | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 1.22 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | 0.012 A12 mA | — | — | ||
| Graupner | C 5191 * | Hobby | 4.8V 78.0 oz-in5.62 kg-cm0.6 N-m | 4.8V 0.12 s/60°500.0 deg/s83.3 RPM | (add) | 1.76 oz50.0 g | 1.54×0.75×1.46 in 39.1×19.0×37.1 mm | — | Standard | (add) | (add) | (add) | Metal | 23 | Single Bearing | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 1.20 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | C 577 * | Hobby | 4.8V 50.0 oz-in3.60 kg-cm0.4 N-m | 4.8V 0.15 s/60°400.0 deg/s66.7 RPM | ≤0.82 A≤820 mA | 1.48 oz42.0 g | 1.50×0.75×1.46 in 38.1×19.0×37.1 mm | — | Standard | (add) | (add) | (add) | Plastic | 23 | Bushing | Analog | (add) | 90° | (add) | 20 ms | (add) | 1500 µs | (add) | 50 Hz | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.62 W | — | (add) | — | — | — | — | — | — | Position | (add) | Positional | 0.005 A5 mA | — | — | ||
| Graupner | C 677 * | Hobby |
6.0V 52.4 oz-in3.77 kg-cm0.4 N-m 4.8V 43.9 oz-in3.16 kg-cm0.3 N-m |
6.0V 0.20 s/60°300.0 deg/s50.0 RPM 4.8V 0.24 s/60°250.0 deg/s41.7 RPM |
(add) | 1.23 oz34.9 g | 1.50×0.71×1.46 in 38.1×18.0×37.1 mm | — | Mini | (add) | (add) | (add) | Plastic | 23 | Bushing | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.34–0.48 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | C 713 * | Hobby | 6.0V 86.0 oz-in6.19 kg-cm0.6 N-m | 6.0V 0.36 s/60°166.7 deg/s27.8 RPM | (add) | 1.20 oz34.0 g | 1.73×0.87×0.94 in 43.9×22.1×23.9 mm | — | Low Profile | (add) | (add) | (add) | Plastic | 23 | Bushing | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.44 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | C 7421 * | Hobby | 4.8V 56.0 oz-in4.03 kg-cm0.4 N-m | 4.8V 0.15 s/60°400.0 deg/s66.7 RPM | (add) | 1.16 oz32.9 g | 1.73×0.87×0.94 in 43.9×22.1×23.9 mm | — | Low Profile | (add) | (add) | (add) | Plastic | 23 | Dual Bearings | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.69 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | C 7451 * | Hobby |
6.0V 103.4 oz-in7.44 kg-cm0.7 N-m 4.8V 26.4 oz-in1.90 kg-cm0.2 N-m |
6.0V 0.18 s/60°333.3 deg/s55.6 RPM 4.8V 0.18 s/60°333.3 deg/s55.6 RPM |
(add) | 1.34 oz38.0 g | 1.73×0.87×0.94 in 44.0×22.0×24.0 mm | — | Unknown | (add) | (add) | (add) | Plastic | 23 | Dual Bearings | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.27–1.06 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | DES 131 | Hobby |
6.0V 9.7 oz-in0.70 kg-cm0.1 N-m 4.8V 8.3 oz-in0.60 kg-cm0.1 N-m |
6.0V 0.06 s/60°1,000.0 deg/s166.7 RPM 4.8V 0.07 s/60°857.1 deg/s142.9 RPM |
(add) | 0.18 oz5.0 g | 0.79×0.43×0.81 in 20.0×11.0×20.5 mm | — | Micro | (add) | Brushed | (add) | Karbonite | (add) | Dual Bearings | Digital | (add) | 90° | (add) | 3 ms | (add) | 1500 µs | (add) | 333 Hz | (add) | PWM | Yes | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JST-ZHR | (add) | (add) | 0.22–0.30 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | 0.005 A5 mA | — | — | ||
| Graupner | DES 131SH | Hobby |
6.0V 9.7 oz-in0.70 kg-cm0.1 N-m 4.8V 8.3 oz-in0.60 kg-cm0.1 N-m |
6.0V 0.06 s/60°1,000.0 deg/s166.7 RPM 4.8V 0.07 s/60°857.1 deg/s142.9 RPM |
(add) | 0.19 oz5.4 g | 0.79×0.44×0.79 in 20.0×11.2×20.0 mm | — | Micro | (add) | Brushed | (add) | Plastic | 15 | Single Bearing | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | Yes | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JST-SH | (add) | (add) | 0.22–0.30 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | DES 261 BB | Hobby |
6.0V 28.3 oz-in2.04 kg-cm0.2 N-m 4.8V 24.1 oz-in1.73 kg-cm0.2 N-m |
6.0V 0.15 s/60°400.0 deg/s66.7 RPM 4.8V 0.19 s/60°315.8 deg/s52.6 RPM |
0.36–0.45 A360–450 mA | 0.28 oz8.0 g | 0.85×0.43×0.83 in 21.5×11.0×21.0 mm | — | Mini | (add) | Brushed | (add) | Karbonite | 23 | Single Bearing | Digital | (add) | 90° | (add) | (add) | (add) | 1500 µs | (add) | (add) | (add) | PWM | Yes | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.23–0.35 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | 0.005 A5 mA | — | — | ||
| Graupner | DES 271 BB | Hobby |
6.0V 13.9 oz-in1.00 kg-cm0.1 N-m 4.8V 11.1 oz-in0.80 kg-cm0.1 N-m |
6.0V 0.06 s/60°1,000.0 deg/s166.7 RPM 4.8V 0.07 s/60°857.1 deg/s142.9 RPM |
(add) | 0.28 oz8.0 g | 0.85×0.43×0.83 in 21.5×11.0×21.0 mm | — | Micro | (add) | Brushed | (add) | Karbonite | (add) | Single Bearing | Digital | (add) | 90° | (add) | 3 ms | (add) | 1500 µs | (add) | 333 Hz | (add) | PWM | Yes | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.29–0.43 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | 0.005 A5 mA | — | — | ||
| Graupner | DES 281 BBMG | Hobby |
6.0V 27.8 oz-in2.00 kg-cm0.2 N-m 4.8V 25.0 oz-in1.80 kg-cm0.2 N-m |
6.0V 0.15 s/60°400.0 deg/s66.7 RPM 4.8V 0.18 s/60°333.3 deg/s55.6 RPM |
(add) | 0.30 oz8.5 g | 0.85×0.43×0.83 in 21.5×11.0×21.0 mm | — | Micro | (add) | Brushed | (add) | Steel | 23 | Single Bearing | Digital | (add) | 90° | (add) | 3 ms | (add) | 1500 µs | (add) | 333 Hz | (add) | PWM | Yes | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.26–0.34 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | 0.005 A5 mA | — | — | ||
| Graupner | DES 291 BBMG * | Hobby |
6.0V 13.9 oz-in1.00 kg-cm0.1 N-m 4.8V 11.1 oz-in0.80 kg-cm0.1 N-m |
6.0V 0.06 s/60°1,000.0 deg/s166.7 RPM 4.8V 0.07 s/60°857.1 deg/s142.9 RPM |
(add) | 0.30 oz8.5 g | 0.85×0.43×0.83 in 21.5×11.0×21.0 mm | — | Micro | (add) | Brushed | (add) | Steel | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | 1–16 µs | (add) | (add) | (add) | (add) | PWM | Yes | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.29–0.43 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | DES 427 BB | Hobby |
6.0V 31.2 oz-in2.24 kg-cm0.2 N-m 4.8V 26.9 oz-in1.94 kg-cm0.2 N-m |
6.0V 0.15 s/60°400.0 deg/s66.7 RPM 4.8V 0.20 s/60°307.7 deg/s51.3 RPM |
(add) | 0.32 oz9.0 g | 0.91×0.35×1.14 in 23.1×8.9×29.0 mm | — | Micro | (add) | 3-pole | (add) | Karbonite | 15 | Dual Bearings | Digital | (add) | 90° | (add) | (add) | (add) | 1500 µs | (add) | (add) | (add) | (add) | Yes | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.26–0.38 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | 0.005 A5 mA | — | — | ||
| Graupner | DES 428 BBMG | Hobby |
6.0V 34.0 oz-in2.45 kg-cm0.2 N-m 4.8V 28.3 oz-in2.04 kg-cm0.2 N-m |
6.0V 0.15 s/60°400.0 deg/s66.7 RPM 4.8V 0.20 s/60°307.7 deg/s51.3 RPM |
(add) | 0.34 oz9.5 g | 0.91×0.35×1.14 in 23.1×8.9×29.0 mm | — | Micro | (add) | 3-pole | (add) | Metal | 15 | Dual Bearings | Digital | (add) | 90° | (add) | 3 ms | (add) | 1500 µs | (add) | (add) | (add) | (add) | Yes | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.27–0.42 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | 0.005 A5 mA | — | — | ||
| Graupner | DES 448 BBMG | Hobby |
6.0V 66.6 oz-in4.79 kg-cm0.5 N-m 4.8V 59.5 oz-in4.28 kg-cm0.4 N-m |
6.0V 0.15 s/60°400.0 deg/s66.7 RPM 4.8V 0.18 s/60°333.3 deg/s55.6 RPM |
(add) | 0.67 oz19.0 g | 1.24×0.37×1.30 in 31.5×9.4×33.0 mm | — | Slim | (add) | 3-pole | (add) | Metal | 23 | Dual Bearings | Digital | (add) | 90° | (add) | 3 ms | (add) | 1500 µs | (add) | 333 Hz | (add) | (add) | Yes | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.61–0.82 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | 0.007 A7 mA | — | — | ||
| Graupner | DES 476 BB * | Hobby |
6.0V 29.2 oz-in2.10 kg-cm0.2 N-m 4.8V 25.0 oz-in1.80 kg-cm0.2 N-m |
6.0V 0.09 s/60°666.7 deg/s111.1 RPM 4.8V 0.11 s/60°545.5 deg/s90.9 RPM |
(add) | 0.35 oz10.0 g | 0.93×0.45×1.06 in 23.6×11.4×26.9 mm | — | Micro | (add) | 3-pole | (add) | Karbonite | 23 | Single Bearing | Digital | (add) | 90° | (add) | (add) | (add) | 1500 µs | (add) | (add) | (add) | (add) | Yes | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.42–0.60 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | 0.007 A7 mA | — | — | ||
| Graupner | DES 477 BB | Hobby |
6.0V 13.9 oz-in1.00 kg-cm0.1 N-m 6.0V 13.9 oz-in1.00 kg-cm0.1 N-m |
6.0V 0.05 s/60°1,200.0 deg/s200.0 RPM 6.0V 0.05 s/60°1,200.0 deg/s200.0 RPM |
(add) | 0.36 oz10.3 g | 0.93×0.45×1.06 in 23.6×11.4×26.9 mm | — | Micro | (add) | 3-pole | (add) | Plastic | 23 | Single Bearing | Digital | (add) | 90° | (add) | (add) | (add) | 1500 µs | (add) | 333 Hz | (add) | (add) | Yes | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.51 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | 0.007 A7 mA | — | — | ||
| Graupner | DES 478 BBMG | Hobby |
6.0V 36.8 oz-in2.65 kg-cm0.3 N-m 4.8V 29.7 oz-in2.14 kg-cm0.2 N-m |
6.0V 0.15 s/60°400.0 deg/s66.7 RPM 4.8V 0.20 s/60°307.7 deg/s51.3 RPM |
(add) | 0.39 oz11.0 g | 0.93×0.45×1.06 in 23.6×11.4×26.9 mm | — | Micro | (add) | 3-pole | (add) | Metal | 23 | Single Bearing | Digital | (add) | 90° | (add) | 3 ms | (add) | 1500 µs | (add) | 333 Hz | (add) | (add) | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.28–0.45 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | 0.007 A7 mA | — | — | ||
| Graupner | DES 488 BBMG | Hobby |
6.0V 43.9 oz-in3.16 kg-cm0.3 N-m 4.8V 36.8 oz-in2.65 kg-cm0.3 N-m |
6.0V 0.12 s/60°500.0 deg/s83.3 RPM 4.8V 0.14 s/60°444.4 deg/s74.1 RPM |
(add) | 0.38 oz10.8 g | 0.93×0.45×1.06 in 23.6×11.4×26.9 mm | — | Micro | (add) | 3-pole | (add) | Metal | 15 | Single Bearing | Digital | (add) | 90° | (add) | (add) | (add) | 1500 µs | (add) | 333 Hz | Potentiometer | (add) | Yes | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.50–0.68 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | 0.007 A7 mA | — | — | ||
Make: Graupner
Stall Current: (add)
Shaft Power: 0.96 W
Weight: 1.48 oz42.0 g
Size Class: Unknown
Diameter: —
Dimensions: 1.54×0.75×1.57 in 39.0×19.0×40.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 23
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 1.51 W
Weight: 1.83 oz51.9 g
Size Class: Standard
Diameter: —
Dimensions: 1.54×0.75×1.57 in 39.0×19.0×40.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 23
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: 90°
Mech. Limit: (add)
Pulse Cycle: 16.67 ms
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 60 Hz
Angle Sensor: Potentiometer
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 0.69 W
Weight: 1.59 oz45.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.54×0.75×1.57 in 39.0×19.0×40.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 23
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: 16.67 ms
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 60 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 1.28 W
Weight: 1.62 oz46.0 g
Size Class: Unknown
Diameter: —
Dimensions: 1.54×0.75×1.57 in 39.0×19.0×40.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 23
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: 16.67 ms
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 60 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: ≤1.01 A≤1010 mA
Shaft Power: 1.08 W
Weight: 1.31 oz37.1 g
Size Class: Standard
Diameter: —
Dimensions: 1.54×0.75×1.46 in 39.1×19.0×37.1 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 23
Rotation: Single Bearing
Modulation: Analog
Direction: (add)
Op. Range: 90°
Mech. Limit: (add)
Pulse Cycle: 20 ms
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 1.22 W
Weight: 1.59 oz45.1 g
Size Class: Standard
Diameter: —
Dimensions: 1.54×0.75×1.57 in 39.1×19.0×39.9 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 23
Rotation: (add)
Modulation: Analog
Direction: (add)
Op. Range: 90°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Potentiometer
Control System: (add)
Programmable: Yes
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 1.20 W
Weight: 1.76 oz50.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.54×0.75×1.46 in 39.1×19.0×37.1 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 23
Rotation: Single Bearing
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: ≤0.82 A≤820 mA
Shaft Power: 0.62 W
Weight: 1.48 oz42.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.50×0.75×1.46 in 38.1×19.0×37.1 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 23
Rotation: Bushing
Modulation: Analog
Direction: (add)
Op. Range: 90°
Mech. Limit: (add)
Pulse Cycle: 20 ms
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: 50 Hz
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: Position
Make: Graupner
Stall Current: (add)
Shaft Power: 0.34–0.48 W
Weight: 1.23 oz34.9 g
Size Class: Mini
Diameter: —
Dimensions: 1.50×0.71×1.46 in 38.1×18.0×37.1 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 23
Rotation: Bushing
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 0.44 W
Weight: 1.20 oz34.0 g
Size Class: Low Profile
Diameter: —
Dimensions: 1.73×0.87×0.94 in 43.9×22.1×23.9 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 23
Rotation: Bushing
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 0.69 W
Weight: 1.16 oz32.9 g
Size Class: Low Profile
Diameter: —
Dimensions: 1.73×0.87×0.94 in 43.9×22.1×23.9 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 23
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 0.27–1.06 W
Weight: 1.34 oz38.0 g
Size Class: Unknown
Diameter: —
Dimensions: 1.73×0.87×0.94 in 44.0×22.0×24.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 23
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 0.22–0.30 W
Weight: 0.18 oz5.0 g
Size Class: Micro
Diameter: —
Dimensions: 0.79×0.43×0.81 in 20.0×11.0×20.5 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Karbonite
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 90°
Mech. Limit: (add)
Pulse Cycle: 3 ms
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: PWM
Programmable: Yes
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JST-ZHR
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 0.22–0.30 W
Weight: 0.19 oz5.4 g
Size Class: Micro
Diameter: —
Dimensions: 0.79×0.44×0.79 in 20.0×11.2×20.0 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 15
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: Yes
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JST-SH
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: 0.36–0.45 A360–450 mA
Shaft Power: 0.23–0.35 W
Weight: 0.28 oz8.0 g
Size Class: Mini
Diameter: —
Dimensions: 0.85×0.43×0.83 in 21.5×11.0×21.0 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Karbonite
Gear Spline/Teeth: 23
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: 90°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: Yes
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 0.29–0.43 W
Weight: 0.28 oz8.0 g
Size Class: Micro
Diameter: —
Dimensions: 0.85×0.43×0.83 in 21.5×11.0×21.0 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Karbonite
Gear Spline/Teeth: (add)
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: 90°
Mech. Limit: (add)
Pulse Cycle: 3 ms
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: PWM
Programmable: Yes
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 0.26–0.34 W
Weight: 0.30 oz8.5 g
Size Class: Micro
Diameter: —
Dimensions: 0.85×0.43×0.83 in 21.5×11.0×21.0 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 23
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: 90°
Mech. Limit: (add)
Pulse Cycle: 3 ms
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: PWM
Programmable: Yes
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 0.29–0.43 W
Weight: 0.30 oz8.5 g
Size Class: Micro
Diameter: —
Dimensions: 0.85×0.43×0.83 in 21.5×11.0×21.0 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 1–16 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: Yes
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 0.26–0.38 W
Weight: 0.32 oz9.0 g
Size Class: Micro
Diameter: —
Dimensions: 0.91×0.35×1.14 in 23.1×8.9×29.0 mm
Case Material: (add)
Motor Type: 3-pole
Motor Drive: (add)
Gear Material: Karbonite
Gear Spline/Teeth: 15
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 90°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: Yes
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 0.27–0.42 W
Weight: 0.34 oz9.5 g
Size Class: Micro
Diameter: —
Dimensions: 0.91×0.35×1.14 in 23.1×8.9×29.0 mm
Case Material: (add)
Motor Type: 3-pole
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 15
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 90°
Mech. Limit: (add)
Pulse Cycle: 3 ms
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: Yes
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 0.61–0.82 W
Weight: 0.67 oz19.0 g
Size Class: Slim
Diameter: —
Dimensions: 1.24×0.37×1.30 in 31.5×9.4×33.0 mm
Case Material: (add)
Motor Type: 3-pole
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 23
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 90°
Mech. Limit: (add)
Pulse Cycle: 3 ms
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: Yes
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 0.42–0.60 W
Weight: 0.35 oz10.0 g
Size Class: Micro
Diameter: —
Dimensions: 0.93×0.45×1.06 in 23.6×11.4×26.9 mm
Case Material: (add)
Motor Type: 3-pole
Motor Drive: (add)
Gear Material: Karbonite
Gear Spline/Teeth: 23
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: 90°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: Yes
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 0.51 W
Weight: 0.36 oz10.3 g
Size Class: Micro
Diameter: —
Dimensions: 0.93×0.45×1.06 in 23.6×11.4×26.9 mm
Case Material: (add)
Motor Type: 3-pole
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 23
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: 90°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: Yes
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 0.28–0.45 W
Weight: 0.39 oz11.0 g
Size Class: Micro
Diameter: —
Dimensions: 0.93×0.45×1.06 in 23.6×11.4×26.9 mm
Case Material: (add)
Motor Type: 3-pole
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 23
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: 90°
Mech. Limit: (add)
Pulse Cycle: 3 ms
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 0.50–0.68 W
Weight: 0.38 oz10.8 g
Size Class: Micro
Diameter: —
Dimensions: 0.93×0.45×1.06 in 23.6×11.4×26.9 mm
Case Material: (add)
Motor Type: 3-pole
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 15
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: 90°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: Potentiometer
Control System: (add)
Programmable: Yes
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Quick Tips
- Models with an asterisk (*) have been discontinued.
- Click on any servo model name to see more details about that product.
- Click on any brand name to filter all servos for that brand.
- In the desktop view, click on any column header to sort the table by that attribute. Click again to reverse the order.
Compare Prices for
Unable to load results. Please try again.