Discover XQ-Power Servos in Our eBay Store!
Shop NowSearch Matches (2,573)
- Weight: Greater than 1.76 ounces (50 grams)
- Torque: Greater than 417 oz-in (30.03 kg-cm / 2.9 N-m) @ 48 volts
Performance
Physical
Drivetrain
Control & Signal
Electrical & Environment
Connectivity
Origin
Preferences are saved automatically.
| Make | Model | Category | Torque | Speed | Stall Current |
Weight | Dimensions (L×W×H) |
Diameter | Size Class |
Case Material |
Motor Type |
Motor Drive |
Gear Material |
Gear Spline/ Teeth |
Rotation | Modulation | Direction | Op. Range |
Mech. Limit |
Pulse Cycle |
Pulse Width |
Neutral Pos. |
Dead Band |
Refresh Rate |
Angle Sensor |
Control System |
Programmable | Op. Voltage |
Power Source |
Regulator Type |
Temperature | Water Rating |
Certification | Connector | Wire Length |
Country of Origin |
Shaft Power |
Shape | Shaft Size |
Resolution | Gear Ratio |
Baud Rate |
Output Power |
Radial Load |
MCU | Operating Modes |
Running Current |
Rotation Mode |
Idle Current |
Backlash | Signal Voltage |
Compare | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| We may earn a commission from your purchase. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Graupner | HCM 870 BBMG | Hobby |
7.4V 354.2 oz-in25.50 kg-cm2.5 N-m 6.0V 291.7 oz-in21.00 kg-cm2.1 N-m 4.8V 229.2 oz-in16.50 kg-cm1.6 N-m |
7.4V 0.10 s/60°600.0 deg/s100.0 RPM 6.0V 0.12 s/60°500.0 deg/s83.3 RPM 4.8V 0.15 s/60°400.0 deg/s66.7 RPM |
(add) | 2.54 oz72.0 g | 1.57×0.79×1.59 in 39.9×20.1×40.4 mm | — | Standard | (add) | Coreless | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 2.82–6.55 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | HCM 880 BBMG | Hobby |
7.4V 277.8 oz-in20.00 kg-cm2.0 N-m 6.0V 222.2 oz-in16.00 kg-cm1.6 N-m 4.8V 180.6 oz-in13.00 kg-cm1.3 N-m |
7.4V 0.07 s/60°857.1 deg/s142.9 RPM 6.0V 0.09 s/60°666.7 deg/s111.1 RPM 4.8V 0.11 s/60°545.5 deg/s90.9 RPM |
(add) | 2.54 oz72.0 g | 1.57×0.79×1.59 in 39.9×20.1×40.4 mm | — | Standard | (add) | Coreless | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 3.03–7.34 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | HGM SOR +T BBMG | Hobby |
7.4V 173.6 oz-in12.50 kg-cm1.2 N-m 6.0V 145.8 oz-in10.50 kg-cm1.0 N-m 4.8V 116.7 oz-in8.40 kg-cm0.8 N-m |
7.4V 0.11 s/60°545.5 deg/s90.9 RPM 6.0V 0.14 s/60°428.6 deg/s71.4 RPM 4.8V 0.16 s/60°375.0 deg/s62.5 RPM |
(add) | 2.47 oz70.0 g | 1.57×0.79×1.59 in 40.0×20.0×40.4 mm | — | Standard | (add) | Brushless | (add) | Steel | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | (add) | 4.8–7.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 1.35–2.92 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | HGM SOR BBMG | Hobby |
7.4V 173.6 oz-in12.50 kg-cm1.2 N-m 6.0V 145.8 oz-in10.50 kg-cm1.0 N-m 4.8V 116.7 oz-in8.40 kg-cm0.8 N-m |
7.4V 0.11 s/60°545.5 deg/s90.9 RPM 6.0V 0.14 s/60°428.6 deg/s71.4 RPM 4.8V 0.16 s/60°375.0 deg/s62.5 RPM |
(add) | 2.47 oz70.0 g | 1.57×0.79×1.59 in 40.0×20.0×40.4 mm | — | Standard | (add) | Brushless | (add) | Steel | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | (add) | 4.8–7.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 1.35–2.92 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | HGM SST +T BBMG | Hobby |
7.4V 145.8 oz-in10.50 kg-cm1.0 N-m 6.0V 125.0 oz-in9.00 kg-cm0.9 N-m 4.8V 104.2 oz-in7.50 kg-cm0.7 N-m |
7.4V 0.08 s/60°750.0 deg/s125.0 RPM 6.0V 0.10 s/60°600.0 deg/s100.0 RPM 4.8V 0.12 s/60°500.0 deg/s83.3 RPM |
(add) | 2.05 oz58.0 g | 1.57×0.77×1.54 in 40.0×19.5×39.2 mm | — | Standard | (add) | Brushless | (add) | Steel | (add) | Dual Bearings | Digital | (add) | (add) | (add) | 2500 ms | (add) | 1500 µs | (add) | (add) | (add) | PWM | (add) | 4.8–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 1.61–3.37 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | HGM SST BBMG | Hobby |
7.4V 145.8 oz-in10.50 kg-cm1.0 N-m 6.0V 125.0 oz-in9.00 kg-cm0.9 N-m 4.8V 104.2 oz-in7.50 kg-cm0.7 N-m |
7.4V 0.08 s/60°750.0 deg/s125.0 RPM 6.0V 0.10 s/60°600.0 deg/s100.0 RPM 4.8V 0.12 s/60°500.0 deg/s83.3 RPM |
(add) | 2.05 oz58.0 g | 1.57×0.77×1.54 in 40.0×19.5×39.2 mm | — | Standard | (add) | Brushless | (add) | Steel | (add) | Dual Bearings | Digital | (add) | (add) | (add) | 2500 ms | (add) | 1500 µs | (add) | (add) | (add) | PWM | (add) | 4.8–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 1.61–3.37 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | HVC 860 BBMG | Hobby |
7.4V 284.7 oz-in20.50 kg-cm2.0 N-m 6.0V 243.1 oz-in17.50 kg-cm1.7 N-m 4.8V 208.3 oz-in15.00 kg-cm1.5 N-m |
7.4V 0.15 s/60°400.0 deg/s66.7 RPM 6.0V 0.18 s/60°333.3 deg/s55.6 RPM 4.8V 0.21 s/60°285.7 deg/s47.6 RPM |
(add) | 2.36 oz67.0 g | 1.57×0.79×1.57 in 40.0×20.0×40.0 mm | — | Standard | (add) | Coreless | (add) | Steel | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | (add) | 4.8–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 1.83–3.51 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | HVC 861 BBMG | Hobby |
7.4V 444.4 oz-in32.00 kg-cm3.1 N-m 6.0V 361.1 oz-in26.00 kg-cm2.5 N-m 4.8V 277.8 oz-in20.00 kg-cm2.0 N-m |
7.4V 0.12 s/60°500.0 deg/s83.3 RPM 6.0V 0.14 s/60°428.6 deg/s71.4 RPM 4.8V 0.17 s/60°352.9 deg/s58.8 RPM |
(add) | 2.36 oz67.0 g | 1.57×0.79×1.59 in 39.9×20.1×40.4 mm | — | Standard | (add) | Coreless | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 3.02–6.85 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | HVC 870 BBMG | Hobby |
7.4V 229.2 oz-in16.50 kg-cm1.6 N-m 6.0V 201.4 oz-in14.50 kg-cm1.4 N-m 4.8V 166.7 oz-in12.00 kg-cm1.2 N-m |
7.4V 0.12 s/60°500.0 deg/s83.3 RPM 6.0V 0.15 s/60°400.0 deg/s66.7 RPM 4.8V 0.17 s/60°352.9 deg/s58.8 RPM |
(add) | 2.36 oz67.0 g | 1.57×0.79×1.57 in 40.0×20.0×40.0 mm | — | Standard | (add) | Coreless | (add) | Steel | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | (add) | 4.8–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 1.81–3.53 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | HVC 871 BBMG | Hobby |
7.4V 354.2 oz-in25.50 kg-cm2.5 N-m 6.0V 291.7 oz-in21.00 kg-cm2.1 N-m 4.8V 229.2 oz-in16.50 kg-cm1.6 N-m |
7.4V 0.10 s/60°600.0 deg/s100.0 RPM 6.0V 0.12 s/60°500.0 deg/s83.3 RPM 4.8V 0.15 s/60°400.0 deg/s66.7 RPM |
(add) | 2.36 oz67.0 g | 1.57×0.79×1.59 in 39.9×20.1×40.4 mm | — | Standard | (add) | Coreless | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 2.82–6.55 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | HVC 880 BBMG | Hobby |
7.4V 173.6 oz-in12.50 kg-cm1.2 N-m 6.0V 152.8 oz-in11.00 kg-cm1.1 N-m 4.8V 127.8 oz-in9.20 kg-cm0.9 N-m |
7.4V 0.09 s/60°666.7 deg/s111.1 RPM 6.0V 0.12 s/60°500.0 deg/s83.3 RPM 4.8V 0.13 s/60°461.5 deg/s76.9 RPM |
(add) | 2.47 oz70.0 g | 1.57×0.79×1.59 in 39.9×20.1×40.4 mm | — | Standard | (add) | Coreless | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 1.82–3.57 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | HVC 881 BBMG | Hobby |
7.4V 277.8 oz-in20.00 kg-cm2.0 N-m 6.0V 222.2 oz-in16.00 kg-cm1.6 N-m 4.8V 180.6 oz-in13.00 kg-cm1.3 N-m |
7.4V 0.07 s/60°857.1 deg/s142.9 RPM 6.0V 0.09 s/60°666.7 deg/s111.1 RPM 4.8V 0.11 s/60°545.5 deg/s90.9 RPM |
(add) | 2.36 oz67.0 g | 1.57×0.79×1.59 in 39.9×20.1×40.4 mm | — | Standard | (add) | Coreless | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 3.03–7.34 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | HVS 939 BBMG | Hobby |
7.4V 166.7 oz-in12.00 kg-cm1.2 N-m 6.0V 145.8 oz-in10.50 kg-cm1.0 N-m |
7.4V 0.16 s/60°375.0 deg/s62.5 RPM 6.0V 0.19 s/60°315.8 deg/s52.6 RPM |
(add) | 2.05 oz58.0 g | 1.57×0.77×1.65 in 40.0×19.5×42.0 mm | — | Standard | (add) | Brushed | (add) | Steel | (add) | Dual Bearings | Digital | (add) | (add) | (add) | 3000 ms | (add) | 1500 µs | (add) | (add) | (add) | PWM | (add) | 4.8–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 1.42–1.93 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | Regatta * | Hobby |
7.2V 141.6 oz-in10.20 kg-cm1.0 N-m 6.0V 111.9 oz-in8.06 kg-cm0.8 N-m 4.8V 75.0 oz-in5.40 kg-cm0.5 N-m |
7.2V 0.11 s/60°545.5 deg/s90.9 RPM 6.0V 0.13 s/60°461.5 deg/s76.9 RPM 4.8V 0.17 s/60°352.9 deg/s58.8 RPM |
(add) | 3.17 oz90.0 g | 1.81×0.91×1.65 in 46.0×23.1×41.9 mm | — | Large | (add) | (add) | (add) | Metal | 23 | Single Bearing | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.82–2.38 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | Regatta Eco * | Hobby | 6.0V 63.7 oz-in4.59 kg-cm0.4 N-m | 6.0V 0.20 s/60°300.0 deg/s50.0 RPM | (add) | 2.47 oz70.0 g | 1.81×0.91×1.65 in 46.0×23.1×41.9 mm | — | Large | (add) | (add) | (add) | Metal | 23 | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.59 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | Sailwinch 4 * | Hobby | (add) |
6.0V 0.08 s/60°750.0 deg/s125.0 RPM 4.8V 0.11 s/60°545.5 deg/s90.9 RPM |
(add) | 5.64 oz160.0 g | 4.02×2.01×1.89 in 102.1×51.1×48.0 mm | — | Giant | (add) | (add) | (add) | (add) | 23 | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | — | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| GWS | S03N 2BBMG | Hobby |
6.0V 111.0 oz-in7.99 kg-cm0.8 N-m 4.8V 100.0 oz-in7.20 kg-cm0.7 N-m |
6.0V 0.27 s/60°222.2 deg/s37.0 RPM 4.8V 0.33 s/60°181.8 deg/s30.3 RPM |
(add) | 2.26 oz64.1 g | 1.56×0.79×1.40 in 39.6×20.1×35.6 mm | — | Standard | (add) | (add) | (add) | Metal | 25 | Dual Bearings | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.56–0.76 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| GWS | S03NF 2BBMG | Hobby |
6.0V 90.0 oz-in6.48 kg-cm0.6 N-m 4.8V 81.0 oz-in5.83 kg-cm0.6 N-m |
6.0V 0.22 s/60°272.7 deg/s45.5 RPM 4.8V 0.27 s/60°222.2 deg/s37.0 RPM |
(add) | 2.26 oz64.1 g | 1.56×0.79×1.40 in 39.6×20.1×35.6 mm | — | Standard | (add) | (add) | (add) | Metal | 25 | Dual Bearings | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.55–0.76 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| GWS | S03NXF 2BBMG * | Hobby |
6.0V 86.0 oz-in6.19 kg-cm0.6 N-m 4.8V 70.0 oz-in5.04 kg-cm0.5 N-m |
6.0V 0.17 s/60°352.9 deg/s58.8 RPM 4.8V 0.21 s/60°285.7 deg/s47.6 RPM |
(add) | 2.26 oz64.1 g | 1.56×0.79×1.40 in 39.6×20.1×35.6 mm | — | Standard | (add) | (add) | (add) | Metal | 25 | Dual Bearings | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.62–0.94 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| GWS | S03T 2BBMG * | Hobby |
6.0V 120.0 oz-in8.64 kg-cm0.8 N-m 4.8V 103.0 oz-in7.42 kg-cm0.7 N-m |
6.0V 0.27 s/60°222.2 deg/s37.0 RPM 4.8V 0.33 s/60°181.8 deg/s30.3 RPM |
(add) | 2.57 oz72.9 g | 1.56×0.79×1.56 in 39.6×20.1×39.6 mm | — | Standard | (add) | (add) | (add) | Metal | 25 | Dual Bearings | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.58–0.82 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| GWS | S03TF 2BBMG * | Hobby |
6.0V 96.0 oz-in6.91 kg-cm0.7 N-m 4.8V 83.0 oz-in5.98 kg-cm0.6 N-m |
6.0V 0.22 s/60°272.7 deg/s45.5 RPM 4.8V 0.27 s/60°222.2 deg/s37.0 RPM |
(add) | 2.57 oz72.9 g | 1.56×0.79×1.56 in 39.6×20.1×39.6 mm | — | Standard | (add) | (add) | (add) | Metal | 25 | Dual Bearings | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.57–0.81 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| GWS | S03TXF 2BBMG * | Hobby |
6.0V 90.0 oz-in6.48 kg-cm0.6 N-m 4.8V 78.0 oz-in5.62 kg-cm0.6 N-m |
6.0V 0.17 s/60°352.9 deg/s58.8 RPM 4.8V 0.21 s/60°285.7 deg/s47.6 RPM |
(add) | 2.57 oz72.9 g | 1.56×0.79×1.56 in 39.6×20.1×39.6 mm | — | Standard | (add) | (add) | (add) | Metal | 25 | Dual Bearings | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.69–0.98 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| GWS | S04 BB * | Hobby |
6.0V 181.0 oz-in13.03 kg-cm1.3 N-m 4.8V 139.0 oz-in10.01 kg-cm1.0 N-m |
6.0V 0.20 s/60°300.0 deg/s50.0 RPM 4.8V 0.25 s/60°240.0 deg/s40.0 RPM |
(add) | 6.63 oz188.0 g | 2.14×1.04×2.03 in 54.4×26.4×51.6 mm | — | Custom | (add) | (add) | (add) | (add) | 25 | (add) | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 1.03–1.67 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| GWS | S15 * | Hobby |
6.0V 128.0 oz-in9.22 kg-cm0.9 N-m 4.8V 108.0 oz-in7.78 kg-cm0.8 N-m |
6.0V 0.13 s/60°461.5 deg/s76.9 RPM 4.8V 0.16 s/60°375.0 deg/s62.5 RPM |
(add) | 2.34 oz66.3 g | 1.59×0.79×1.48 in 40.4×20.1×37.6 mm | — | Standard | (add) | (add) | (add) | Metal | 25 | Dual Bearings | Analog | (add) | (add) | (add) | (add) | (add) | 1520 µs | (add) | 1500 Hz | (add) | (add) | Yes | 6–8.4 V | (add) | (add) | -10–60°C14.0–140.0°F | (add) | (add) | JR (Universal) | 180 mm7.09 in | Hong Kong | 1.25–1.82 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| GWS | S15 2BBMG * | Hobby | 4.8V 108.3 oz-in7.80 kg-cm0.8 N-m | 4.8V 0.16 s/60°375.0 deg/s62.5 RPM | (add) | 2.34 oz66.4 g | 1.59×0.79×1.48 in 40.4×20.1×37.6 mm | — | Standard | (add) | (add) | (add) | Metal | (add) | Dual Bearings | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 1.25 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
Make: Graupner
Stall Current: (add)
Shaft Power: 2.82–6.55 W
Weight: 2.54 oz72.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.59 in 39.9×20.1×40.4 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 3.03–7.34 W
Weight: 2.54 oz72.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.59 in 39.9×20.1×40.4 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 1.35–2.92 W
Weight: 2.47 oz70.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.59 in 40.0×20.0×40.4 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 1.35–2.92 W
Weight: 2.47 oz70.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.59 in 40.0×20.0×40.4 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 1.61–3.37 W
Weight: 2.05 oz58.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.77×1.54 in 40.0×19.5×39.2 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: 2500 ms
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 1.61–3.37 W
Weight: 2.05 oz58.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.77×1.54 in 40.0×19.5×39.2 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: 2500 ms
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 1.83–3.51 W
Weight: 2.36 oz67.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.57 in 40.0×20.0×40.0 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 3.02–6.85 W
Weight: 2.36 oz67.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.59 in 39.9×20.1×40.4 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 1.81–3.53 W
Weight: 2.36 oz67.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.57 in 40.0×20.0×40.0 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 2.82–6.55 W
Weight: 2.36 oz67.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.59 in 39.9×20.1×40.4 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 1.82–3.57 W
Weight: 2.47 oz70.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.59 in 39.9×20.1×40.4 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 3.03–7.34 W
Weight: 2.36 oz67.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.59 in 39.9×20.1×40.4 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 1.42–1.93 W
Weight: 2.05 oz58.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.77×1.65 in 40.0×19.5×42.0 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: 3000 ms
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 0.82–2.38 W
Weight: 3.17 oz90.0 g
Size Class: Large
Diameter: —
Dimensions: 1.81×0.91×1.65 in 46.0×23.1×41.9 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 23
Rotation: Single Bearing
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 0.59 W
Weight: 2.47 oz70.0 g
Size Class: Large
Diameter: —
Dimensions: 1.81×0.91×1.65 in 46.0×23.1×41.9 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 23
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: —
Weight: 5.64 oz160.0 g
Size Class: Giant
Diameter: —
Dimensions: 4.02×2.01×1.89 in 102.1×51.1×48.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: (add)
Gear Spline/Teeth: 23
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: GWS
Stall Current: (add)
Shaft Power: 0.56–0.76 W
Weight: 2.26 oz64.1 g
Size Class: Standard
Diameter: —
Dimensions: 1.56×0.79×1.40 in 39.6×20.1×35.6 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: GWS
Stall Current: (add)
Shaft Power: 0.55–0.76 W
Weight: 2.26 oz64.1 g
Size Class: Standard
Diameter: —
Dimensions: 1.56×0.79×1.40 in 39.6×20.1×35.6 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: GWS
Stall Current: (add)
Shaft Power: 0.62–0.94 W
Weight: 2.26 oz64.1 g
Size Class: Standard
Diameter: —
Dimensions: 1.56×0.79×1.40 in 39.6×20.1×35.6 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: GWS
Stall Current: (add)
Shaft Power: 0.58–0.82 W
Weight: 2.57 oz72.9 g
Size Class: Standard
Diameter: —
Dimensions: 1.56×0.79×1.56 in 39.6×20.1×39.6 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: GWS
Stall Current: (add)
Shaft Power: 0.57–0.81 W
Weight: 2.57 oz72.9 g
Size Class: Standard
Diameter: —
Dimensions: 1.56×0.79×1.56 in 39.6×20.1×39.6 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: GWS
Stall Current: (add)
Shaft Power: 0.69–0.98 W
Weight: 2.57 oz72.9 g
Size Class: Standard
Diameter: —
Dimensions: 1.56×0.79×1.56 in 39.6×20.1×39.6 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: GWS
Stall Current: (add)
Shaft Power: 1.03–1.67 W
Weight: 6.63 oz188.0 g
Size Class: Custom
Diameter: —
Dimensions: 2.14×1.04×2.03 in 54.4×26.4×51.6 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: (add)
Gear Spline/Teeth: 25
Rotation: (add)
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: GWS
Stall Current: (add)
Shaft Power: 1.25–1.82 W
Weight: 2.34 oz66.3 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.79×1.48 in 40.4×20.1×37.6 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 1500 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: Yes
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–60°C14.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 180 mm7.09 in
Country of Origin: Hong Kong
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: GWS
Stall Current: (add)
Shaft Power: 1.25 W
Weight: 2.34 oz66.4 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.79×1.48 in 40.4×20.1×37.6 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Quick Tips
- Models with an asterisk (*) have been discontinued.
- Click on any servo model name to see more details about that product.
- Click on any brand name to filter all servos for that brand.
- In the desktop view, click on any column header to sort the table by that attribute. Click again to reverse the order.
Compare Prices for
Unable to load results. Please try again.