Discover XQ-Power Servos in Our eBay Store!
Shop NowSearch Matches (2,636)
- Weight: Greater than 1.76 ounces (50 grams)
- Torque: Greater than 417 oz-in (30.03 kg-cm / 2.9 N-m) @ 48 volts
Performance
Physical
Drivetrain
Control & Signal
Electrical & Environment
Connectivity
Origin
Preferences are saved automatically.
| Make | Model | Category | Torque | Speed | Stall Current |
Weight | Dimensions (L×W×H) |
Diameter | Size Class |
Case Material |
Motor Type |
Motor Drive |
Gear Material |
Gear Spline/ Teeth |
Rotation | Modulation | Direction | Op. Range |
Mech. Limit |
Pulse Cycle |
Pulse Width |
Neutral Pos. |
Dead Band |
Refresh Rate |
Angle Sensor |
Control System |
Programmable | Op. Voltage |
Power Source |
Regulator Type |
Temperature | Water Rating |
Certification | Connector | Wire Length |
Country of Origin |
Shaft Power |
Shape | Shaft Size |
Resolution | Gear Ratio |
Baud Rate |
Output Power |
Radial Load |
MCU | Operating Modes |
Running Current |
Rotation Mode |
Idle Current |
Backlash | Signal Voltage |
Compare | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| We may earn a commission from your purchase. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Feetech | HLS3620M | Hobby |
8.4V 354.2 oz-in25.51 kg-cm2.5 N-m 7.4V 313.0 oz-in22.54 kg-cm2.2 N-m 6.0V 267.1 oz-in19.23 kg-cm1.9 N-m |
8.4V 0.14 s/60°444.4 deg/s74.1 RPM 7.4V 0.15 s/60°392.2 deg/s65.4 RPM 6.0V 0.19 s/60°324.3 deg/s54.1 RPM |
2.5–3.3 A2500–3300 mA | 2.18 oz61.7 g | 1.583×0.795×1.575 in 40.2×20.2×40.0 mm | — | Standard | Aluminum | Cored | (add) | Copper | 25 | Dual Bearings | Digital | (add) | 360° | (add) | (add) | (add) | (add) | (add) | 1000 Hz | Magnetic Encoder | TTL | Yes | 6–8.4 V | (add) | (add) | -10–60°C14.0–140.0°F | (add) | RoHS | JST-PH | 150 mm5.91 in | China | 2.67–4.85 W | — | (add) | — | — | — | — | — | — | — | 0.280 A @ 8.4V280 mA @ 8.4V | Continuous | 0.024 A24 mA | — | — | ||
| Feetech | HLS3625M | Hobby |
7.4V 347.3 oz-in25.00 kg-cm2.5 N-m 6.0V 277.7 oz-in20.00 kg-cm2.0 N-m |
7.4V 0.19 s/60°312.5 deg/s52.1 RPM 6.0V 0.24 s/60°252.1 deg/s42.0 RPM |
2.7–3 A2700–3000 mA | 1.94 oz55.0 g | 1.78×0.972×1.378 in 45.2×24.7×35.0 mm | — | Standard | Nylon / Fiberglass | Cored | (add) | Copper | 25 | Single Bearing | Digital | Clockwise | 360° | (add) | (add) | (add) | (add) | (add) | (add) | Magnetic Encoder | TTL | Yes | 5–8.4 V | (add) | (add) | -10–60°C14.0–140.0°F | (add) | RoHS | (add) | 150 mm5.91 in | China | 2.16–3.34 W | — | (add) | — | — | — | — | — | — | — | 0.180 A @ 7.4V180 mA @ 7.4V | Multi-turn | 0.021 A21 mA | — | — | ||
| Feetech | HLS3640M | Hobby |
7.4V 555.6 oz-in40.01 kg-cm3.9 N-m 6.0V 452.1 oz-in32.56 kg-cm3.2 N-m |
7.4V 0.22 s/60°272.7 deg/s45.5 RPM 6.0V 0.27 s/60°219.0 deg/s36.5 RPM |
2.7–3.3 A2700–3300 mA | 3.14 oz89.0 g | 1.575×0.787×1.695 in 40.0×20.0×43.1 mm | — | Standard | Aluminum | Coreless | (add) | Steel | 25 | Dual Bearings | Digital | Clockwise | 360° | (add) | (add) | (add) | (add) | (add) | (add) | Magnetic Encoder | TTL | (add) | 5–8.4 V | (add) | (add) | -20–60°C-4.0–140.0°F | (add) | (add) | (add) | 150 mm5.91 in | China | 3.05–4.67 W | — | (add) | — | — | — | — | — | — | — | 0.150 A @ 7.4V150 mA @ 7.4V | Continuous | (add) | — | — | ||
| Feetech | HLS3925M | Hobby | 12.0V 347.3 oz-in25.00 kg-cm2.5 N-m | 12.0V 0.18 s/60°329.7 deg/s54.9 RPM | ≤2.7 A≤2700 mA | 2.18 oz61.7 g | 1.583×0.795×1.575 in 40.2×20.2×40.0 mm | — | Standard | (add) | Cored | (add) | Metal | (add) | Single Bearing | Digital | (add) | 360° | (add) | (add) | (add) | (add) | (add) | (add) | (add) | TTL | (add) | 9–12.6 V | (add) | (add) | -20–60°C-4.0–140.0°F | (add) | (add) | (add) | (add) | China | 3.53 W | — | (add) | — | — | — | — | — | — | — | 0.170 A @ 12.0V170 mA @ 12.0V | (add) | (add) | — | — | ||
| Feetech | HLS3930M | Hobby | 12.0V 486.2 oz-in35.01 kg-cm3.4 N-m | 12.0V 0.22 s/60°270.3 deg/s45.0 RPM | ≤2.8 A≤2800 mA | 2.49 oz70.5 g | 1.78×0.973×1.378 in 45.2×24.7×35.0 mm | — | Standard | Aluminum | Cored | (add) | Steel | 25 | Single Bearing | Digital | (add) | 360° | (add) | (add) | (add) | (add) | (add) | (add) | Magnetic Encoder | TTL | Yes | 9–12.6 V | (add) | (add) | -20–60°C-4.0–140.0°F | (add) | ROHS | (add) | 150 mm5.91 in | China | 4.05 W | — | (add) | — | — | — | — | — | — | Position, Velocity, Current | 0.150 A @ 12.0V150 mA @ 12.0V | Multi-turn | 0.026 A26 mA | — | — | ||
| Feetech | HLS3935M | Hobby | 12.0V 486.2 oz-in35.01 kg-cm3.4 N-m | 12.0V 0.12 s/60°512.8 deg/s85.5 RPM | ≤3.1 A≤3100 mA | 3.00 oz85.0 g | 1.575×0.787×1.575 in 40.0×20.0×40.0 mm | — | Standard | Aluminum | Coreless | (add) | Steel | (add) | Dual Bearings | Digital | Clockwise | 360° | (add) | (add) | (add) | (add) | (add) | 1 Hz | Magnetic Encoder | TTL | Yes | 9–12.6 V | (add) | (add) | -20–60°C-4.0–140.0°F | (add) | (add) | JST-PH | 150 mm5.91 in | China | 7.68 W | — | (add) | — | 378.000 | — | — | — | — | Position, Continuous | 0.200 A @ 12.0V200 mA @ 12.0V | Continuous | (add) | 0.500° | — | ||
| Feetech | HLS3950M | Robotics | 12.0V 694.5 oz-in50.01 kg-cm4.9 N-m | 12.0V 0.13 s/60°451.1 deg/s75.2 RPM | ≤2.4 A≤2400 mA | 2.63 oz74.5 g | 1.78×0.972×1.382 in 45.2×24.7×35.1 mm | (add) | Standard | Aluminum | Coreless | (add) | Steel | 25 | Dual Bearings | Digital | (add) | 360° | (add) | (add) | (add) | (add) | (add) | (add) | Magnetic Encoder | TTL | Yes | 9–12.6 V | (add) | (add) | -20–60°C-4.0–140.0°F | (add) | RoHS | (add) | 150 mm5.91 in | China | 9.66 W | (add) | 5.9 mm | 4,096 p/r | 345.000 | (add) | (add) | (add) | (add) | Angle servo mode; motor constant speed mode; motor constant current mode | 0.330 A @ 12.0V330 mA @ 12.0V | Multi-turn | 0.024 A24 mA | (add) | (add) | ||
| Feetech | HLS3955M | Hobby | 12.0V 764.0 oz-in55.01 kg-cm5.4 N-m | 12.0V 0.18 s/60°329.7 deg/s54.9 RPM | ≤3 A≤3000 mA | 3.00 oz85.0 g | 1.575×0.787×1.575 in 40.0×20.0×40.0 mm | — | Standard | Aluminum | Coreless | (add) | Steel | (add) | Single Bearing | Digital | (add) | 360° | (add) | (add) | (add) | (add) | (add) | (add) | Magnetic Encoder | TTL | Yes | 9–12.6 V | (add) | (add) | -20–60°C-4.0–140.0°F | (add) | (add) | JST-PH | 150 mm5.91 in | China | 7.76 W | — | (add) | — | — | — | — | — | — | — | 0.150 A @ 12.0V150 mA @ 12.0V | Multi-turn | 0.027 A27 mA | — | — | ||
| Feetech | SCS46-C001 | Hobby | 7.4V 562.6 oz-in40.51 kg-cm4.0 N-m | 7.4V 0.22 s/60°272.7 deg/s45.5 RPM | ≤4.4 A≤4400 mA | 3.14 oz89.0 g | 1.575×0.787×1.695 in 40.0×20.0×43.1 mm | — | Standard | Aluminum | Coreless | (add) | Steel | 25 | Dual Bearings | Digital | (add) | 300° | (add) | (add) | (add) | (add) | (add) | (add) | Potentiometer | Serial | (add) | 6–7.4 V | (add) | (add) | -15–70°C5.0–158.0°F | (add) | (add) | (add) | 150 mm5.91 in | China | 4.73 W | — | (add) | — | — | — | — | — | — | — | 0.300 A @ 7.4V300 mA @ 7.4V | Continuous | (add) | — | — | ||
| Feetech | SCS46-C005 | Hobby |
7.4V 562.6 oz-in40.51 kg-cm4.0 N-m 6.0V 562.6 oz-in40.51 kg-cm4.0 N-m |
7.4V 0.21 s/60°285.7 deg/s47.6 RPM 6.0V 0.21 s/60°285.7 deg/s47.6 RPM |
(add) | 3.10 oz88.0 g | 1.57×0.79×1.69 in 39.9×20.1×42.9 mm | — | Standard | (add) | Coreless | (add) | Metal | 25 | Dual Bearings | Digital | (add) | 360° | (add) | (add) | (add) | (add) | (add) | (add) | (add) | TTL | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 150 mm5.91 in | (add) | 4.95 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Feetech | SM120BL | Hobby | 24.0V 1,666.8 oz-in120.02 kg-cm11.8 N-m | 24.0V 0.20 s/60°300.0 deg/s50.0 RPM | ≤4 A≤4000 mA | 17.11 oz485.0 g | 3.071×1.693×2.579 in 78.0×43.0×65.5 mm | — | Giant | Aluminum | Brushless | (add) | Steel | (add) | Dual Bearings | Digital | (add) | 360° | (add) | (add) | (add) | (add) | (add) | 1000 Hz | Magnetic Encoder | RS485 | Yes | 9–25 V | (add) | (add) | -20–60°C-4.0–140.0°F | (add) | (add) | (add) | 300 mm11.81 in | China | 15.41 W | — | (add) | 4,096 p/r | 232.000 | 38.4 Kbps–1 Mbps | — | — | — | Position, Continuous | 0.200 A @ 24.0V200 mA @ 24.0V | Multi-turn | 0.040 A40 mA | 0.800° | — | ||
| Feetech | SM120BL-C003 | Hobby | 24.0V 1,666.8 oz-in120.02 kg-cm11.8 N-m | 24.0V 0.20 s/60°300.0 deg/s50.0 RPM | ≤4 A≤4000 mA | 17.11 oz485.0 g | 3.07×1.69×2.58 in 78.0×42.9×65.5 mm | — | Giant | Aluminum | Brushless | (add) | Steel | (add) | Dual Bearings | Digital | (add) | 360° | (add) | (add) | (add) | (add) | (add) | (add) | Magnetic Encoder | RS485 | (add) | 24–24 V | (add) | (add) | -20–80°C-4.0–176.0°F | (add) | (add) | (add) | 300 mm11.81 in | (add) | 15.41 W | — | (add) | — | — | — | — | — | — | — | 0.200 A @ 24.0V200 mA @ 24.0V | Multi-turn | (add) | — | — | ||
| Feetech | SM24BL | Hobby | 24.0V 333.3 oz-in24.00 kg-cm2.4 N-m | 24.0V 0.09 s/60°666.7 deg/s111.1 RPM | ≤1.3 A≤1300 mA | 9.06 oz256.9 g | 4.469×0.787×2.126 in 113.5×20.0×54.0 mm | — | Giant | Aluminum | Brushless | (add) | Steel | (add) | (add) | Digital | (add) | 360° | (add) | (add) | (add) | (add) | (add) | (add) | Contactless Absolute Encoder | RS485 | Yes | 9–25 V | (add) | (add) | -40–70°C-40.0–158.0°F | (add) | (add) | (add) | (add) | China | 6.85 W | — | (add) | — | — | — | — | — | — | — | 0.150 A @ 24.0V150 mA @ 24.0V | Continuous | 0.150 A150 mA | — | — | ||
| Feetech | SM24BL | Hobby | 24.0V 333.4 oz-in24.00 kg-cm2.4 N-m | 24.0V 0.08 s/60°750.0 deg/s125.0 RPM | ≤1.3 A≤1300 mA | 3.16 oz89.6 g | 1.575×0.787×1.882 in 40.0×20.0×47.8 mm | — | Standard | Aluminum | Brushless | (add) | Steel | 6 | (add) | Digital | Clockwise | 360° | (add) | (add) | (add) | (add) | (add) | (add) | Magnetic Encoder | RS485 | (add) | 24–24 V | (add) | (add) | -40–70°C-40.0–158.0°F | (add) | (add) | (add) | (add) | China | 7.70 W | — | (add) | — | — | — | — | — | — | — | 0.090 A @ 24.0V90 mA @ 24.0V | Multi-turn | (add) | — | — | ||
| Feetech | SM260BL | Hobby | 24.0V 3,611.4 oz-in260.05 kg-cm25.5 N-m | 24.0V 0.19 s/60°315.8 deg/s52.6 RPM | ≤9.1 A≤9100 mA | 16.05 oz455.0 g | 3.071×1.693×2.579 in 78.0×43.0×65.5 mm | — | Giant | Aluminum | Brushless | (add) | Steel | (add) | Dual Bearings | Digital | (add) | 360° | (add) | (add) | (add) | (add) | (add) | 1000 Hz | Magnetic Encoder | RS485 | Yes | 12–25.2 V | (add) | (add) | -20–60°C-4.0–140.0°F | (add) | (add) | 4-pin | 300 mm11.81 in | China | 35.14 W | — | (add) | — | — | — | — | — | — | Position, Velocity | 0.320 A @ 24.0V320 mA @ 24.0V | Multi-turn | 0.025 A25 mA | 0.800° | — | ||
| Feetech | SM2912 | Hobby | 12.0V 333.3 oz-in24.00 kg-cm2.4 N-m | 12.0V 0.09 s/60°666.7 deg/s111.1 RPM | 1.5–3 A1500–3000 mA | 3.53 oz100.0 g | 1.575×1.102×1.665 in 40.0×28.0×42.3 mm | — | Large | Aluminum | Brushless | (add) | Steel | 6 | Dual Bearings | Digital | (add) | 360° | (add) | (add) | (add) | (add) | (add) | 333 Hz | Magnetic Encoder | RS485 | (add) | 9–16 V | (add) | (add) | -30–80°C-22.0–176.0°F | (add) | (add) | (add) | 200 mm7.87 in | China | 6.85 W | — | (add) | — | — | 34.8 Kbps–1 Mbps | — | 10.0 N | — | Position, Continuous | 0.200 A @ 12.0V200 mA @ 12.0V | Multi-turn | 0.035 A35 mA | — | — | ||
| Feetech | SM2924 | Hobby | 24.0V 83.3 oz-in6.00 kg-cm0.6 N-m | 24.0V 0.10 s/60°612.2 deg/s102.0 RPM | 1.1–1.5 A1100–1500 mA | 9.42 oz267.0 g | 2.165×1.181×3.616 in 55.0×30.0×91.8 mm | — | Giant | Aluminum | Brushless | (add) | Steel | 6 | (add) | Digital | (add) | 5040° | (add) | (add) | (add) | (add) | (add) | (add) | Contactless Absolute Encoder | RS485 | Yes | 12–24 V | (add) | (add) | -40–80°C-40.0–176.0°F | (add) | (add) | (add) | (add) | China | 1.57 W | — | (add) | — | — | — | — | — | — | Position, Continuous Rotation | 0.150 A @ 24.0V150 mA @ 24.0V | Multi-turn | 0.035 A35 mA | — | — | ||
| Feetech | SM2924 | Hobby |
24.0V 333.3 oz-in24.00 kg-cm2.4 N-m 12.0V 166.7 oz-in12.00 kg-cm1.2 N-m |
24.0V 0.09 s/60°660.1 deg/s110.0 RPM | (add) | 3.53 oz100.0 g | 1.575×1.102×1.665 in 40.0×28.0×42.3 mm | — | Large | Aluminum | Brushless | (add) | Steel | 6 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 1000 Hz | Magnetic Encoder | RS485 | Yes | 12–24 V | (add) | (add) | -40–80°C-40.0–176.0°F | (add) | (add) | (add) | (add) | China | 6.78 W | — | (add) | — | — | — | — | — | — | — | (add) | Multi-turn | (add) | — | — | ||
| Feetech | SM30BL | Robotics | 12.0V 416.6 oz-in30.00 kg-cm2.9 N-m | 12.0V 0.14 s/60°428.6 deg/s71.4 RPM | ≤3.8 A≤3800 mA | 3.60 oz102.0 g | 2.126×1.102×1.579 in 54.0×28.0×40.1 mm | (add) | Large | Aluminum | Brushless | (add) | Steel | (add) | (add) | Digital | Clockwise | 360° | (add) | (add) | (add) | 2048 µs | (add) | (add) | Magnetic Encoder | RS485 | Yes | 12–12 V | (add) | (add) | -15–60°C5.0–140.0°F | (add) | (add) | (add) | (add) | China | 5.50 W | Boxed | (add) | 4,096 p/r | (add) | 34.8 Kbps–1 Mbps | (add) | (add) | (add) | (add) | 1.300 A @ 12.0V1,300 mA @ 12.0V | Multi-Turn | 0.035 A35 mA | (add) | (add) | ||
| Feetech | SM40BL | Hobby |
12.0V 555.6 oz-in40.01 kg-cm3.9 N-m 6.0V 44.5 oz-in3.20 kg-cm0.3 N-m |
12.0V 0.15 s/60°400.0 deg/s66.7 RPM | 1.5–2.5 A1500–2500 mA | 3.53 oz100.0 g | 1.831×1.122×1.339 in 46.5×28.5×34.0 mm | — | Large | Aluminum | Brushless | (add) | Steel | 25 | Dual Bearings | Digital | (add) | 360° | (add) | (add) | (add) | (add) | (add) | 333 Hz | Magnetic Encoder | RS485 | Yes | 9–16 V | (add) | (add) | -20–60°C-4.0–140.0°F | Waterproof | (add) | (add) | 150 mm5.91 in | China | 6.85 W | — | (add) | — | — | — | — | — | — | Position, Continuous | (add) | Multi-turn | 0.200 A200 mA | — | — | ||
| Feetech | SM45BL | Robotics | 24.0V 625.1 oz-in45.01 kg-cm4.4 N-m |
24.0V 0.14 s/60°428.6 deg/s71.4 RPM 12.0V 0.29 s/60°210.5 deg/s35.1 RPM |
1.3–2.3 A1300–2300 mA | 3.53 oz100.0 g | 1.831×1.122×1.339 in 46.5×28.5×34.0 mm | (add) | Large | Aluminum | Brushless | (add) | Steel | 25 | Dual Bearings | Digital | (add) | 360° | (add) | (add) | (add) | (add) | (add) | (add) | Magnetic Encoder | RS485 | Yes | 9–24 V | (add) | (add) | -20–80°C-4.0–176.0°F | IP54 | RoHS | (add) | (add) | China | 8.26 W | Boxed | (add) | (add) | 353.000 | 38.4 Kbps–1 Mbps | (add) | (add) | (add) | (add) | 0.160 A @ 24.0V160 mA @ 24.0V | Multi-turn | (add) | 0.500° | (add) | ||
| Feetech | SM70BL | Hobby | 24.0V 972.3 oz-in70.01 kg-cm6.9 N-m | 24.0V 0.13 s/60°461.5 deg/s76.9 RPM | ≤3.5 A≤3500 mA | 3.23 oz91.6 g | 1.575×0.787×1.882 in 40.0×20.0×47.8 mm | — | Standard | Aluminum | 4-pole | (add) | Steel | 25 | (add) | Digital | Clockwise | 360° | (add) | (add) | (add) | (add) | (add) | 1000 Hz | Magnetic Encoder | RS485 | Yes | 16.8–25.2 V | (add) | (add) | -40–70°C-40.0–158.0°F | (add) | (add) | TJC25020-4P | 400 mm15.75 in | China | 13.83 W | Boxed | 5.9 mm | 4,095 p/r | 356.000 | 38.4 Kbps–1 Mbps | — | — | — | — | 0.180 A @ 24.0V180 mA @ 24.0V | Multi-turn | 0.022 A22 mA | 0.500° | — | ||
| Feetech | SM80BL | Hobby | 12.0V 1,111.2 oz-in80.02 kg-cm7.8 N-m | 12.0V 0.16 s/60°375.0 deg/s62.5 RPM | ≤5.9 A≤5900 mA | 3.44 oz97.5 g | 1.831×1.122×1.339 in 46.5×28.5×34.0 mm | — | Large | Aluminum | Brushless | (add) | Steel | 25 | Single Bearing | Digital | (add) | 360° | (add) | (add) | (add) | (add) | (add) | (add) | Magnetic Encoder | RS485 | (add) | 9–12.6 V | (add) | (add) | -20–80°C-4.0–176.0°F | (add) | CE | ROHS | 5264-4P | 400 mm15.75 in | China | 12.84 W | — | (add) | — | — | — | — | — | — | — | 0.280 A @ 12.0V280 mA @ 12.0V | Multi-turn | 0.045 A45 mA | 0.500° | — | ||
| Feetech | SM80BL-C002 | Hobby | 24.0V 1,180.7 oz-in85.02 kg-cm8.3 N-m | 24.0V 0.14 s/60°428.6 deg/s71.4 RPM | ≤3.9 A≤3900 mA | 3.44 oz97.5 g | 1.831×1.122×1.339 in 46.5×28.5×34.0 mm | — | Large | Aluminum | Brushless | (add) | Steel | 25 | Single Bearing | Digital | Clockwise | 360° | (add) | (add) | (add) | (add) | (add) | (add) | Magnetic Encoder | RS485 | Yes | 16.8–25.2 V | (add) | (add) | -20–60°C-4.0–140.0°F | (add) | RoHS | 4-pin | 400 mm15.75 in | China | 15.59 W | — | (add) | — | — | — | — | — | — | — | 0.180 A @ 24.0V180 mA @ 24.0V | Positional | 0.040 A40 mA | 0.500° | — | ||
| Feetech | SM8524BL | Hobby | 24.0V 1,180.7 oz-in85.02 kg-cm8.3 N-m | 24.0V 0.15 s/60°400.0 deg/s66.7 RPM | ≤5.6 A≤5600 mA | 7.58 oz215.0 g | 2.441×1.339×1.85 in 62.0×34.0×47.0 mm | — | Giant | Aluminum | Brushless | (add) | Steel | 15 | Dual Bearings | Digital | (add) | 360° | (add) | (add) | (add) | (add) | (add) | (add) | Magnetic Encoder | RS485 | Yes | 9–24 V | (add) | (add) | -20–60°C-4.0–140.0°F | (add) | RoHS | (add) | 400 mm15.75 in | China | 14.55 W | — | (add) | — | — | 38.4 Kbps–1 Mbps | — | — | — | Position, Velocity, Step | 0.250 A @ 24.0V250 mA @ 24.0V | Multi-turn | 0.035 A35 mA | 0.500° | — | ||
Make: Feetech
Stall Current: 2.5–3.3 A2500–3300 mA
Shaft Power: 2.67–4.85 W
Weight: 2.18 oz61.7 g
Size Class: Standard
Diameter: —
Dimensions: 1.583×0.795×1.575 in 40.2×20.2×40.0 mm
Case Material: Aluminum
Motor Type: Cored
Motor Drive: (add)
Gear Material: Copper
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 360°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: 1000 Hz
Angle Sensor: Magnetic Encoder
Control System: TTL
Programmable: Yes
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–60°C14.0–140.0°F
Water Rating: (add)
Certification: RoHS
Connector: JST-PH
Wire Length: 150 mm5.91 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: 2.7–3 A2700–3000 mA
Shaft Power: 2.16–3.34 W
Weight: 1.94 oz55.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.78×0.972×1.378 in 45.2×24.7×35.0 mm
Case Material: Nylon / Fiberglass
Motor Type: Cored
Motor Drive: (add)
Gear Material: Copper
Gear Spline/Teeth: 25
Rotation: Single Bearing
Modulation: Digital
Direction: Clockwise
Op. Range: 360°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: TTL
Programmable: Yes
Op. Voltage: 5–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–60°C14.0–140.0°F
Water Rating: (add)
Certification: RoHS
Connector: (add)
Wire Length: 150 mm5.91 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: 2.7–3.3 A2700–3300 mA
Shaft Power: 3.05–4.67 W
Weight: 3.14 oz89.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.575×0.787×1.695 in 40.0×20.0×43.1 mm
Case Material: Aluminum
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: Clockwise
Op. Range: 360°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: TTL
Programmable: (add)
Op. Voltage: 5–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: 150 mm5.91 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: ≤2.7 A≤2700 mA
Shaft Power: 3.53 W
Weight: 2.18 oz61.7 g
Size Class: Standard
Diameter: —
Dimensions: 1.583×0.795×1.575 in 40.2×20.2×40.0 mm
Case Material: (add)
Motor Type: Cored
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: 360°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: TTL
Programmable: (add)
Op. Voltage: 9–12.6 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: ≤2.8 A≤2800 mA
Shaft Power: 4.05 W
Weight: 2.49 oz70.5 g
Size Class: Standard
Diameter: —
Dimensions: 1.78×0.973×1.378 in 45.2×24.7×35.0 mm
Case Material: Aluminum
Motor Type: Cored
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: 360°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: TTL
Programmable: Yes
Op. Voltage: 9–12.6 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: (add)
Certification: ROHS
Connector: (add)
Wire Length: 150 mm5.91 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: Position, Velocity, Current
Make: Feetech
Stall Current: ≤3.1 A≤3100 mA
Shaft Power: 7.68 W
Weight: 3.00 oz85.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.575×0.787×1.575 in 40.0×20.0×40.0 mm
Case Material: Aluminum
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: Clockwise
Op. Range: 360°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: 1 Hz
Angle Sensor: Magnetic Encoder
Control System: TTL
Programmable: Yes
Op. Voltage: 9–12.6 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: JST-PH
Wire Length: 150 mm5.91 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: 378.000
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: Position, Continuous
Make: Feetech
Stall Current: ≤2.4 A≤2400 mA
Shaft Power: 9.66 W
Weight: 2.63 oz74.5 g
Size Class: Standard
Diameter: —
Dimensions: 1.78×0.972×1.382 in 45.2×24.7×35.1 mm
Case Material: Aluminum
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 360°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: TTL
Programmable: Yes
Op. Voltage: 9–12.6 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: (add)
Certification: RoHS
Connector: (add)
Wire Length: 150 mm5.91 in
Country of Origin: China
Shape: —
Shaft Size: 5.9 mm
Resolution: 4,096 p/r
Gear Ratio: 345.000
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: Angle servo mode; motor constant speed mode; motor constant current mode
Make: Feetech
Stall Current: ≤3 A≤3000 mA
Shaft Power: 7.76 W
Weight: 3.00 oz85.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.575×0.787×1.575 in 40.0×20.0×40.0 mm
Case Material: Aluminum
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: 360°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: TTL
Programmable: Yes
Op. Voltage: 9–12.6 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: JST-PH
Wire Length: 150 mm5.91 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: ≤4.4 A≤4400 mA
Shaft Power: 4.73 W
Weight: 3.14 oz89.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.575×0.787×1.695 in 40.0×20.0×43.1 mm
Case Material: Aluminum
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 300°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Potentiometer
Control System: Serial
Programmable: (add)
Op. Voltage: 6–7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -15–70°C5.0–158.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: 150 mm5.91 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: (add)
Shaft Power: 4.95 W
Weight: 3.10 oz88.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.69 in 39.9×20.1×42.9 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 360°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: TTL
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: 150 mm5.91 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: ≤4 A≤4000 mA
Shaft Power: 15.41 W
Weight: 17.11 oz485.0 g
Size Class: Giant
Diameter: —
Dimensions: 3.071×1.693×2.579 in 78.0×43.0×65.5 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 360°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: 1000 Hz
Angle Sensor: Magnetic Encoder
Control System: RS485
Programmable: Yes
Op. Voltage: 9–25 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: 300 mm11.81 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: 4,096 p/r
Gear Ratio: 232.000
Baud Rate: 38.4 Kbps–1 Mbps
Output Power: —
Radial Load: —
MCU: —
Operating Modes: Position, Continuous
Make: Feetech
Stall Current: ≤4 A≤4000 mA
Shaft Power: 15.41 W
Weight: 17.11 oz485.0 g
Size Class: Giant
Diameter: —
Dimensions: 3.07×1.69×2.58 in 78.0×42.9×65.5 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 360°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: RS485
Programmable: (add)
Op. Voltage: 24–24 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–80°C-4.0–176.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: ≤1.3 A≤1300 mA
Shaft Power: 6.85 W
Weight: 9.06 oz256.9 g
Size Class: Giant
Diameter: —
Dimensions: 4.469×0.787×2.126 in 113.5×20.0×54.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: 360°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Contactless Absolute Encoder
Control System: RS485
Programmable: Yes
Op. Voltage: 9–25 V
Power Source: (add)
Regulator Type: (add)
Temperature: -40–70°C-40.0–158.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: ≤1.3 A≤1300 mA
Shaft Power: 7.70 W
Weight: 3.16 oz89.6 g
Size Class: Standard
Diameter: —
Dimensions: 1.575×0.787×1.882 in 40.0×20.0×47.8 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 6
Rotation: (add)
Modulation: Digital
Direction: Clockwise
Op. Range: 360°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: RS485
Programmable: (add)
Op. Voltage: 24–24 V
Power Source: (add)
Regulator Type: (add)
Temperature: -40–70°C-40.0–158.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: ≤9.1 A≤9100 mA
Shaft Power: 35.14 W
Weight: 16.05 oz455.0 g
Size Class: Giant
Diameter: —
Dimensions: 3.071×1.693×2.579 in 78.0×43.0×65.5 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 360°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: 1000 Hz
Angle Sensor: Magnetic Encoder
Control System: RS485
Programmable: Yes
Op. Voltage: 12–25.2 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: 4-pin
Wire Length: 300 mm11.81 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: Position, Velocity
Make: Feetech
Stall Current: 1.5–3 A1500–3000 mA
Shaft Power: 6.85 W
Weight: 3.53 oz100.0 g
Size Class: Large
Diameter: —
Dimensions: 1.575×1.102×1.665 in 40.0×28.0×42.3 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 6
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 360°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: Magnetic Encoder
Control System: RS485
Programmable: (add)
Op. Voltage: 9–16 V
Power Source: (add)
Regulator Type: (add)
Temperature: -30–80°C-22.0–176.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: 200 mm7.87 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: 34.8 Kbps–1 Mbps
Output Power: —
Radial Load: 10.0 N
MCU: —
Operating Modes: Position, Continuous
Make: Feetech
Stall Current: 1.1–1.5 A1100–1500 mA
Shaft Power: 1.57 W
Weight: 9.42 oz267.0 g
Size Class: Giant
Diameter: —
Dimensions: 2.165×1.181×3.616 in 55.0×30.0×91.8 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 6
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: 5040°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Contactless Absolute Encoder
Control System: RS485
Programmable: Yes
Op. Voltage: 12–24 V
Power Source: (add)
Regulator Type: (add)
Temperature: -40–80°C-40.0–176.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: Position, Continuous Rotation
Make: Feetech
Stall Current: (add)
Shaft Power: 6.78 W
Weight: 3.53 oz100.0 g
Size Class: Large
Diameter: —
Dimensions: 1.575×1.102×1.665 in 40.0×28.0×42.3 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 6
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: 1000 Hz
Angle Sensor: Magnetic Encoder
Control System: RS485
Programmable: Yes
Op. Voltage: 12–24 V
Power Source: (add)
Regulator Type: (add)
Temperature: -40–80°C-40.0–176.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: ≤3.8 A≤3800 mA
Shaft Power: 5.50 W
Weight: 3.60 oz102.0 g
Size Class: Large
Diameter: —
Dimensions: 2.126×1.102×1.579 in 54.0×28.0×40.1 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Digital
Direction: Clockwise
Op. Range: 360°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 2048 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: RS485
Programmable: Yes
Op. Voltage: 12–12 V
Power Source: (add)
Regulator Type: (add)
Temperature: -15–60°C5.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: Boxed
Shaft Size: —
Resolution: 4,096 p/r
Gear Ratio: —
Baud Rate: 34.8 Kbps–1 Mbps
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: 1.5–2.5 A1500–2500 mA
Shaft Power: 6.85 W
Weight: 3.53 oz100.0 g
Size Class: Large
Diameter: —
Dimensions: 1.831×1.122×1.339 in 46.5×28.5×34.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 360°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: Magnetic Encoder
Control System: RS485
Programmable: Yes
Op. Voltage: 9–16 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: Waterproof
Certification: (add)
Connector: (add)
Wire Length: 150 mm5.91 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: Position, Continuous
Make: Feetech
Stall Current: 1.3–2.3 A1300–2300 mA
Shaft Power: 8.26 W
Weight: 3.53 oz100.0 g
Size Class: Large
Diameter: —
Dimensions: 1.831×1.122×1.339 in 46.5×28.5×34.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 360°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: RS485
Programmable: Yes
Op. Voltage: 9–24 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–80°C-4.0–176.0°F
Water Rating: IP54
Certification: RoHS
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: 353.000
Baud Rate: 38.4 Kbps–1 Mbps
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: ≤3.5 A≤3500 mA
Shaft Power: 13.83 W
Weight: 3.23 oz91.6 g
Size Class: Standard
Diameter: —
Dimensions: 1.575×0.787×1.882 in 40.0×20.0×47.8 mm
Case Material: Aluminum
Motor Type: 4-pole
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: (add)
Modulation: Digital
Direction: Clockwise
Op. Range: 360°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: 1000 Hz
Angle Sensor: Magnetic Encoder
Control System: RS485
Programmable: Yes
Op. Voltage: 16.8–25.2 V
Power Source: (add)
Regulator Type: (add)
Temperature: -40–70°C-40.0–158.0°F
Water Rating: (add)
Certification: (add)
Connector: TJC25020-4P
Wire Length: 400 mm15.75 in
Country of Origin: China
Shape: Boxed
Shaft Size: 5.9 mm
Resolution: 4,095 p/r
Gear Ratio: 356.000
Baud Rate: 38.4 Kbps–1 Mbps
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: ≤5.9 A≤5900 mA
Shaft Power: 12.84 W
Weight: 3.44 oz97.5 g
Size Class: Large
Diameter: —
Dimensions: 1.831×1.122×1.339 in 46.5×28.5×34.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: 360°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: RS485
Programmable: (add)
Op. Voltage: 9–12.6 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–80°C-4.0–176.0°F
Water Rating: (add)
Certification: CE | ROHS
Connector: 5264-4P
Wire Length: 400 mm15.75 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: ≤3.9 A≤3900 mA
Shaft Power: 15.59 W
Weight: 3.44 oz97.5 g
Size Class: Large
Diameter: —
Dimensions: 1.831×1.122×1.339 in 46.5×28.5×34.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Single Bearing
Modulation: Digital
Direction: Clockwise
Op. Range: 360°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: RS485
Programmable: Yes
Op. Voltage: 16.8–25.2 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: (add)
Certification: RoHS
Connector: 4-pin
Wire Length: 400 mm15.75 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: ≤5.6 A≤5600 mA
Shaft Power: 14.55 W
Weight: 7.58 oz215.0 g
Size Class: Giant
Diameter: —
Dimensions: 2.441×1.339×1.85 in 62.0×34.0×47.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 15
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 360°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: RS485
Programmable: Yes
Op. Voltage: 9–24 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: (add)
Certification: RoHS
Connector: (add)
Wire Length: 400 mm15.75 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: 38.4 Kbps–1 Mbps
Output Power: —
Radial Load: —
MCU: —
Operating Modes: Position, Velocity, Step
Quick Tips
- Models with an asterisk (*) have been discontinued.
- Click on any servo model name to see more details about that product.
- Click on any brand name to filter all servos for that brand.
- In the desktop view, click on any column header to sort the table by that attribute. Click again to reverse the order.
Compare Prices for
Unable to load results. Please try again.